Content |
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz |
Model A7
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
USB streaming from PC / Mac®
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 75mm (3.0in) Midrange
1x 150mm (6.0in) Subwoofer
Frequency response 40Hz - 36kHz ±3dB on reference axis
Frequency range -6dB at 36Hz and 42kHz
Amplifier power output 2x 25W (tweeter)
2x 25W (midrange)
1x 50W (subwoofer)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 100 W
Standby power consumption |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
| Driver Complement: One front-firing x 4.0” midwoofer, Four
x 1.0” aluminum dome tweeters, Two x 4.0” bass radiators
Amplification: 1 x 30W Woofer, 4 x 15W tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, Analog, Ethernet, USB-A for firmware
updates and phone charging |
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
|
Reviews
There are no reviews yet.