Content |
Outer flange (grille) diameter | Metric :4-9/16" (11.6 cm)
Cut Out Diameter | Metric :3-3/4" | 9.55 cm
Depth from Flange | Metric :3" | 7.55 cm
Mounting Depth In-Wall :2-1/2" (6.3 cm)
Driver Complement :3/4" (20mm) pivoting Aluminum dome tweeter axially aligned with a 3-1/2" (8.9 cm) bass/midrange driver
Frequency Response :40 Hz – 30 kHz
Impedance :4 – 8 Ohms
Sensitivity :89dB
Recommended Associated Amplifier Power :10 - 125 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available Finishes :Paintable White
Warranty :5 Years
Weight | Metric :1.9 lb. | 0.85 kg
Packaging :One to a carton
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor
Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
Outer Flange Dimensions | Metric :11” x 12-3/4” | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8” x 11-5/8” | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8” | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2” bass radiators
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg |
Reviews
There are no reviews yet.