| Content |
The DN-300R records to both SD and USB media simultaneously – perfect for recording conferences where the client needs a copy of the recording after the event. With outstanding ease-of-use and simple operation, anyone can use the DN-300R right out of the box and record to SD, USB or both. The DN-300R is exactly what the market is looking for in terms of a simple but high-quality recording solution for commercial applications. The DN-300R gives installers and contractors the flexibility and convenience they need for total commercial recording capability.
- Records WAV and Mp3 files to SD and USB media simultaneously
- Simple and easy to use
- Powers-up in record-ready mode
- Ability to record one media at -10dB for a safety track
- Balanced and unbalanced inputs and outputs
- Compact 1RU design
-
Digital Audio System
-
System: Solid-state SD/USB audio recorder/player
-
Compatible Media (FAT16, FAT32)
- USB Device (mass storage class)
- SD/SDHC
- SDXC
-
Supported File Formats
-
MP3
- Sampling frequency: 44.1 kHz
- Bit rate: 192, 256 kbps (recording); 64 - 320 kbps and VBR (playback)
- Format: MPEG1 Audio Layer 3
- File extension: .mp3
-
WAV
- Sampling frequency: 44.1, 48 kHz
- Bit depth: 16-bit (44.1 kHz), 24-bit (48 kHz)
- Format: Waveform Audio File Format
- File extension: .wav
- Number of Channels: 2 channels / stereo
- Audio Frequency Range: 10 - 20 kHz (± 1.0dB recording, ± 0.8 dB playback)
-
Signal-to-Noise Ratio
- Recording: > 95 dB (1 kHz, 0dB A-weighted)
- Playback: > 95 dB (1 kHz, 0dB A-weighted)
-
Channel Separation
- Recording: > 80 dB (1 kHz, 0dB A-weighted)
- Playback: > 90 dB (1 kHz, 0dB A-weighted)
- Wow and Flutter: < 0.001 %
-
Distortion
- Recording: < 0.008 %
- Playback: < 0.006 %
- Total Harmonic Distortion: < 0.01% (1 kHz, 0dB A-weighted)
-
Inputs
-
Balanced XLR
- Nominal level: +4 dBu ± 1 dBu
- Minimum level: - 40 dBu
- Maximumm level: 20 dBu ± 1 dBu
- Input impedance: 18 kΩ
-
Unbalanced RCA
- Nominal Level: -10 dBV (at full scale: -16 dBu)
- Minimum input Level: -19 dBV or higher
- Input impedance: 22 kΩ ± 10%
-
Outputs
-
Balanced XLR
- Nominal level: +4dBu ± 1 dBu
- Maximum output level: +20 dBu ± 1 dBu
- Output impedance: 600 Ω ± 10%
-
Unbalanced RCA
- Nominal level: -10 dBV ± 2 dBV
- Minimum output level: 6 dBV ± 2 dBV
- Output impedance: 600 Ω ± 10%
-
Connectors
- (2) XLR outputs
- (1) 1/4" (6.35mm) headphone output
- (1) RCA stereo output pair
- (2) XLR inputs
- (1) RCA stereo input pair
- (1) USB port
- (1) SD card slot
- (1) IEC AC power input
-
Power
- Connection: IEC
- Input Voltage: 100 - 240 V~, 50/60 Hz
- Dimensions (width x depth x height): 19.0" x 10.92" x 1.72" (484 x 277 x 44mm)
- Weight: 6.6 lbs (3 kg)
|
For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time.
| 6-track Portable Multi-track Recorder
CD-Quality Recording (44.1kHz/16-bit)
Easy, Intuitive User interface
Built-in High-quality Stereo Condenser Microphone
Two Mic/Line inputs
Compact size and ultra light weight (360g/0.79lb without batteries)
Dedicated Level and Pan/Balance controls per track
Recording media: SD/SDHC card up to 32GB (2GB SD card included)
Recording: 2 tracks simultaneous
Playback: 6 tracks simultaneously
Power: Four AA batteries or optional AC adapter (PS-P520), optional external battery pack(BP-6AA)
Graphic LCD (128 x 64 dots)
Chromatic Tuner/Metronome
USB 2.0 Connection for Wav File import/export (Stereo and Mono)
Undo/Redo (includes Undo history)
Tripod socket hole
Auto punch in/out
Footswitch input
Dedicated stereo mix-down track
| Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware. Features: - Primary HD port for connecting directly to HD Core or Accel cards.
- Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
- Compatible with the latest versions of ProTools
- May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
- Please note: Not compatible with Pro Tools|HD Native
|
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features - Support for PAL, NTSC and 60 Hz B&W standards
- One composite video input and three composite video outputs
- Can operate as a master black-burst generator
- Can operate as genlocking slave device
|
Reviews
There are no reviews yet.