Content |
The DN-300R records to both SD and USB media simultaneously – perfect for recording conferences where the client needs a copy of the recording after the event. With outstanding ease-of-use and simple operation, anyone can use the DN-300R right out of the box and record to SD, USB or both. The DN-300R is exactly what the market is looking for in terms of a simple but high-quality recording solution for commercial applications. The DN-300R gives installers and contractors the flexibility and convenience they need for total commercial recording capability.
- Records WAV and Mp3 files to SD and USB media simultaneously
- Simple and easy to use
- Powers-up in record-ready mode
- Ability to record one media at -10dB for a safety track
- Balanced and unbalanced inputs and outputs
- Compact 1RU design
-
Digital Audio System
-
System: Solid-state SD/USB audio recorder/player
-
Compatible Media (FAT16, FAT32)
- USB Device (mass storage class)
- SD/SDHC
- SDXC
-
Supported File Formats
-
MP3
- Sampling frequency: 44.1 kHz
- Bit rate: 192, 256 kbps (recording); 64 - 320 kbps and VBR (playback)
- Format: MPEG1 Audio Layer 3
- File extension: .mp3
-
WAV
- Sampling frequency: 44.1, 48 kHz
- Bit depth: 16-bit (44.1 kHz), 24-bit (48 kHz)
- Format: Waveform Audio File Format
- File extension: .wav
- Number of Channels: 2 channels / stereo
- Audio Frequency Range: 10 - 20 kHz (± 1.0dB recording, ± 0.8 dB playback)
-
Signal-to-Noise Ratio
- Recording: > 95 dB (1 kHz, 0dB A-weighted)
- Playback: > 95 dB (1 kHz, 0dB A-weighted)
-
Channel Separation
- Recording: > 80 dB (1 kHz, 0dB A-weighted)
- Playback: > 90 dB (1 kHz, 0dB A-weighted)
- Wow and Flutter: < 0.001 %
-
Distortion
- Recording: < 0.008 %
- Playback: < 0.006 %
- Total Harmonic Distortion: < 0.01% (1 kHz, 0dB A-weighted)
-
Inputs
-
Balanced XLR
- Nominal level: +4 dBu ± 1 dBu
- Minimum level: - 40 dBu
- Maximumm level: 20 dBu ± 1 dBu
- Input impedance: 18 kΩ
-
Unbalanced RCA
- Nominal Level: -10 dBV (at full scale: -16 dBu)
- Minimum input Level: -19 dBV or higher
- Input impedance: 22 kΩ ± 10%
-
Outputs
-
Balanced XLR
- Nominal level: +4dBu ± 1 dBu
- Maximum output level: +20 dBu ± 1 dBu
- Output impedance: 600 Ω ± 10%
-
Unbalanced RCA
- Nominal level: -10 dBV ± 2 dBV
- Minimum output level: 6 dBV ± 2 dBV
- Output impedance: 600 Ω ± 10%
-
Connectors
- (2) XLR outputs
- (1) 1/4" (6.35mm) headphone output
- (1) RCA stereo output pair
- (2) XLR inputs
- (1) RCA stereo input pair
- (1) USB port
- (1) SD card slot
- (1) IEC AC power input
-
Power
- Connection: IEC
- Input Voltage: 100 - 240 V~, 50/60 Hz
- Dimensions (width x depth x height): 19.0" x 10.92" x 1.72" (484 x 277 x 44mm)
- Weight: 6.6 lbs (3 kg)
|
For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time.
|
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features - Support for PAL, NTSC and 60 Hz B&W standards
- One composite video input and three composite video outputs
- Can operate as a master black-burst generator
- Can operate as genlocking slave device
| Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.
For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.
Main Features
32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications
Recording media and file systems
Recording media SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kOhm
Nominal input level –14 dBu
Maximum input level +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector 6.3-mm TRS phone jack
Input impedance >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level +4 dBu
Maximum input level +20 dBu
STEREO OUT L/R connectors RCA pin jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
EFFECT SENDS 1/2 connectors 6.3-mm TS phone jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
MONITOR OUT L/R connectors 6.3-mm TRS phone jack
Nominal output level –2 dBu
Maximum output level +14 dBu
Output impedance 200 Ohm
PHONES connector 6.3-mm TRS phone jack
Maximum output power 70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN) DIN 5 pin
Format Standard MIDI format
MIDI output (MIDI OUT) DIN 5 pin
Format Standard MIDI format
USB connector USB 4-pin mini-B type
Format Mass Storage Class USB 2.0 High Speed
REMOTE connector 2.5-mm TRS jack
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply AC adaptor (TASCAM PS-1225L)
Power consumption 12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections) 514 mm x 104 mm x 340 mm
Weight 6.2 kg
Operating temperature 5–35 °C
Design and specifications subject to change without notice. | 6-track Portable Multi-track Recorder
CD-Quality Recording (44.1kHz/16-bit)
Easy, Intuitive User interface
Built-in High-quality Stereo Condenser Microphone
Two Mic/Line inputs
Compact size and ultra light weight (360g/0.79lb without batteries)
Dedicated Level and Pan/Balance controls per track
Recording media: SD/SDHC card up to 32GB (2GB SD card included)
Recording: 2 tracks simultaneous
Playback: 6 tracks simultaneously
Power: Four AA batteries or optional AC adapter (PS-P520), optional external battery pack(BP-6AA)
Graphic LCD (128 x 64 dots)
Chromatic Tuner/Metronome
USB 2.0 Connection for Wav File import/export (Stereo and Mono)
Undo/Redo (includes Undo history)
Tripod socket hole
Auto punch in/out
Footswitch input
Dedicated stereo mix-down track
|
Work faster in your Pro Tools® environment with direct access to primary transport and editing functions. This affordable Digidesign® Pro Tools Custom Keyboard uses the same symbols and color coding system built into the ICON D-Control™ worksurface and other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards.
With functionality specific to Mac systems, the keyboard features plug-and-play USB connectivity.
Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Based on Apple Mac G5 Pro Keyboard
- Two USB ports and USB connection cord
System Requirements
- Digidesign-qualified Mac-based Pro Tools|HD®, Pro Tools LE™, or Pro Tools M-Powered™ system. (Note that some key commands are available only with Pro Tools HD software or with the DV Toolkit™ 2 option for Pro Tools LE.)
|
Reviews
There are no reviews yet.