The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder. The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness […]
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
Simple unobtrusive controller for the recording of audio in board/meeting rooms
Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
RECORD and STOP buttons allow simple control without the need to access the recorder
Ergonomic visually pleasing design with internal weight to prevent table slip
Ultra low power consumption, no need for additional power adaptor
Fully sealed label provides protection against drink spills
Weight
2.00 kg
Reviews
There are no reviews yet.
Be the first to review “Denon DNRP-WRC Wired Remote for DN-F450/650R” Cancel reply
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
Simple unobtrusive controller for the recording of audio in board/meeting rooms
Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
RECORD and STOP buttons allow simple control without the need to access the recorder
Ergonomic visually pleasing design with internal weight to prevent table slip
Ultra low power consumption, no need for additional power adaptor
Fully sealed label provides protection against drink spills
Tuner + Metronome + Recorder - All in One Unit!
The TMR-50 - Your Ideal Practice Partner
Highlights:
Tuner, metronome, and recorder can be used simultaneously or independently.
Internal mic and speaker make it easy to record and play back your performance
Loop Play function lets you repeat a desired region of a recorded track
High-quality linear PCM recording/playback
Record up to 100 tracks (approximately total 20 minutes)
USB port lets you transfer recorded data and song files between the TMR-50 and your computer
Newly designed highly responsive LCD needle-type meter
Wide detection range from C1 to C8
The Sound Out function produces a reference tone in a three-octave range from the built-in speaker
The Sound Back function generates the reference tone that's closest to the input sound, while the meter indicates the pitch discrepancy between the reference and the input sound - a great function for ear training!
Calibration supports a range of concert pitches
Marks indicate pure major and minor third intervals
Wide tempo range of 30--252 beats per minute
15 rhythm variations let you practice with a broad range of musical styles
Easy tempo settings with two types of tempo step patterns plus a tap tempo function
Large LCD with backlight brightness that's adjustable over two levels for enhanced visibility
Your choice of body color: black or pearl white
Convenient key layout, and newly designed stand and battery cover
Memory Backup and Auto Power Off
Korg's popular TM series of tuner/metronome units is loved by players who practice to perfect their musical skills. Now joining the lineup is the TMR-50, which adds recorder functionality to the already impressive list of features. An extremely valuable way to improve your playing ability is to identify the problem areas that need work, and then practice to improve those areas. With its built-in mic and speaker, the TMR-50 makes it easy to practice this way. It provides high-quality linear PCM recording and a USB port for convenient usage with your computer. The TMR-50 features equally robust capabilities for its tuner and metronome functionality that will help you improve your sense of pitch and rhythm. Two choices of color are available: black and pearl white. Whether you're in a brass band or an orchestra, the TMR-50 is the ideal partner for anyone who wants to improve their playing.
Specifications
Recording format:
PCM audio format, WAV format (extension: .wav) 44.1 kHz@16-bit
Available recording time:
Maximum approx. 20 minutes (Internal Memory size is 120 MB)
Total number of tracks:
Up to 100 tracks
Tuning:
12 note equal temperament
Detection range:
C1 (32.70 Hz) ~ C8 (4186 Hz), Using Sine Wave.
Reference tone:
C3 (130.81 Hz) ~ C6 (1046.50Hz), 3 Octave.
Tuning Mode:
Meter Mode (AUTO), Sound Out Mode (MANUAL), Sound Back Mode (AUTO)
Calibration range:
A4 = 410 ~ 480 Hz (1 Hz steps)
Detection accuracy:
+/- 1 cent
Sound precision:
+/-1 cent
Tempo range:
Quarter Note = 30 to 252 BPM
Tempo setting:
3 Types: Pendulum Step
Full Step
Tap Tempo
Beat range:
Total 10 beats: "0 to 9" as "Quarter-note" Rhythm
Rhythm pattern:
Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats
Tempo accuracy:
±0.3%
Terminals:
Input (f6.3mm, Mono-Standard Jack type)
Headphones (f3.5mm, Stereo-mini Jack type)
USB (mini-Type B)
Internal Speaker:
Dynamic Speaker (f28 mm)
Power (Battery):
AAA battery (3.0 V) x 2
Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride
Battery Life:
Recorder ... Approximately 16/13/11 hours
(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per
recording.)
Tuner ... Approximately 24/22/20 hours
(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)
Metronome ... Approximately 18/16/14 hours
(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)
Dimensions (W x D x H):
111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches
Weight:
119 g / 4.19 oz (Including battery)
Included items:
AAA battery (3.0 V) x 2 for verifying proper operation
USB Cable
Options:
Contact Mic = CM-100L
Computer Requirements
Windows:
A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port
Macintosh:
Mac OS X 10.5 or later
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features
Support for PAL, NTSC and 60 Hz B&W standards
One composite video input and three composite video outputs
Can operate as a master black-burst generator
Can operate as genlocking slave device
Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware.
Features:
Primary HD port for connecting directly to HD Core or Accel cards.
Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
Compatible with the latest versions of ProTools
May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
Please note: Not compatible with Pro Tools|HD Native
* 8-track Digital Portastudio with CD Burner * Records to SD/SDHC Card media * Import audio tracks from CD * Built-in stereo condenser microphone * Two XLR microphone inputs with phantom power * 1/4" stereo line inputs * Switchable instrument-level input for guitar/bass direct recording * Multi-band mastering effects * 2-band EQ per track * Internal reverb processor with dedicated send per track * Chromatic Tuner and Metronome * Track editing, autopunch and bounce features * Optional RC-3F footswitch offers three switches for punch-in and transport operation * Compact and lightweight * Dimensions: 11.4" W x 2.1" H x 8.2" D * Weight: 4lbs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.