Content |
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
- Simple unobtrusive controller for the recording of audio in board/meeting rooms
- Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
- Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
- RECORD and STOP buttons allow simple control without the need to access the recorder
- Ergonomic visually pleasing design with internal weight to prevent table slip
- Ultra low power consumption, no need for additional power adaptor
- Fully sealed label provides protection against drink spills
|
Liquid Mix HDLiquid Mix HD | TDM Plugin for Pro Tools HD
Key Features
Variety of Classic Emulations
40 compressors and 20 EQs, sampled from vintage originals with a free expanding library online.
Dynamic Convolution Technology
The unique patented Dynamic Convolution process delivers unparalleled EQ and Compression emulations.
Ultra-Low Latency for Recording
With the ultra-low latency of Liquid Mix HD (just 12 samples), it can now be used for recording and live sound applications
Optimised for Pro Tools HD
Over one hundred simultaneous mono instances can be run at 44.1/48kHz on an HD3 system.
Full Control Surface Mapping
Pro Tools TDM format ensures full control mapping on all major Pro Tools control surfaces, including ICON and VENUE.
Unique Hybrid Super EQ
Create your own totally unique 7-band super EQ, built out of separate classic EQ bands.
Compressor 'Free' Mode
Vintage compressors with limited controls can now be set to provide fully variable Attack, Release and Ratio.
Automation and Full Recall
Perfect integration with Pro Tools HD allows for automation of parameters and full recall within your session.
| Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
The APH-2n optional accessory pack includes seven tools for use with the H2n. The remote control can be used to start, stop and pause recordings as well as to add marks. The other accessories in the pack are a windscreen that reduces wind and breath noise, a mic clip adapter for use with a mic stand, a tabletop tripod with extendable legs, a padded-shell case, an AC adapter and a USB cable. |
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
| 6-track Portable Multi-track Recorder
CD-Quality Recording (44.1kHz/16-bit)
Easy, Intuitive User interface
Built-in High-quality Stereo Condenser Microphone
Two Mic/Line inputs
Compact size and ultra light weight (360g/0.79lb without batteries)
Dedicated Level and Pan/Balance controls per track
Recording media: SD/SDHC card up to 32GB (2GB SD card included)
Recording: 2 tracks simultaneous
Playback: 6 tracks simultaneously
Power: Four AA batteries or optional AC adapter (PS-P520), optional external battery pack(BP-6AA)
Graphic LCD (128 x 64 dots)
Chromatic Tuner/Metronome
USB 2.0 Connection for Wav File import/export (Stereo and Mono)
Undo/Redo (includes Undo history)
Tripod socket hole
Auto punch in/out
Footswitch input
Dedicated stereo mix-down track
|
Reviews
There are no reviews yet.