Content |
- Simple and straight circuit design
- 65 W x 2 (4 ohms) high power output
- FM tuner
- Coaxial digital inputs for DNP-F109 and DCD-F109
- Optical digital input for system expansion (TV or other digital gear)
- 2-line front display, to easily identify broadcast stations
- Easy alarm settings
- Newly developed remote controller
- Denon remote connector for App control in combination with DNP-F109
- Available in premium silver and black
|
Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.
echnical specification
|
|
|
Integrated Amplifier
|
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
|
Total harmonic distortion (THD):
|
1 % (1 kHz)
|
Signal-to-noise ratio:
|
92 dB
|
Input Impedance:
|
100 kOhm
|
|
|
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
|
Dimensions W x H x D:
|
440 x 220 x 390 mm
|
Weight:
|
28 kg
|
Accessories:
|
Remote Control
|
Input Terminals:
|
Tape, CD, AUX, Tuner
|
Output terminals:
|
Tape out
|
Circiut:
|
Class A/B P.P.
|
Colour:
|
Chassis chrome, transformer black
|
Colour front:
|
black, silver
|
Sensitivity
|
590 mV
|
Output Impedance:
|
4 Ohm, 8 Ohm
|
Power Output:
|
2 x 70 Watt @ 1 % THD
|
Consumption:
|
max. 380 Watt
|
Highlights
|
switchable reduction of feedback
|
| High sound quality and sophisticated design based on Yamaha\'s rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
- Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
- Pure Direct Mode for greater sound purity
- Simple and sophisticated design
- Phono MM terminal for vinyl playback
- Screw-type speaker terminals
- Speaker selector and speaker terminals for two systems
- Simple design remote control
- Head phone terminal
Specs
Receiver / Integrated Amplifier
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) |
140 W + 140 W |
Maximum Power(8 ohms, 1 kHz, 10% THD) |
100 W + 100 W |
High Dynamic Power/Channel (8/6/4/2 ohms) |
125 W/150 W/165 W/180 W |
Frequency Response |
10 Hz-100 kHz(0 ± 0.5 dB / 0 ± 3.0 dB) |
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) |
0.2% |
Signal-to-Noise Ratio (CD) |
100 dB (S: 500 mV) |
Input Sensitivity (CD) |
500 mV / 47 k-ohms |
Standby Power Consumption |
0.5 W |
Dimensions (W x H x D) |
435 x 141 x 333 mm; 17-1/8" x 5-1/2" x 13-1/8“ |
Weight |
6.7 kg; 14.8 lbs. |
|
First Impressions
If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.
Front Panel | Aluminum/Glass-reinforced resin |
Power Requirement | AC 120V 60Hz |
Power Consumption | 330W (Standby: 0.2W) |
Dimensions W x H x D (Inchs) | 17-3/8 x 4-15/16 x 13-7/8 |
|
Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each
|
Class XD™ amplification designed to eliminate crossover distortion at low signal levels New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms. Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box CAP5 protection technology for trouble free operation Acoustically damped full metal chassis with thick brushed aluminium front panel Customisable front panel display Balanced and unbalanced analogue audio inputs for superior connectivity RS232 controllable Eco-friendly Available in black and silver finishes
|
Reviews
There are no reviews yet.