| Content |
- Powered lectern with built-in 2-way speaker column
- Gooseneck microphone with XLR base
- RCA line and 3.5mm playback inputs
- XLR line output
- USB-powered lamp and charging sockets
- AC convenience outlets
-
System
- 100W RMS (200W Peak) Class-D amplifier
- Bi-amp design
- (4) 5.25" full-range speakers
- (1) Horn-loaded 1 inch HF driver, 25mm voice coil
- Output Frequency Range: 80-20kHz
- Max. SPL: 112dB (@ 1m)
- Precision electronic crossover and limiter
- 2-channel audio mixer
-
Microphone
- Type: Condenser
- Frequency range: 50-16kHz
- Max. SPL: 130dB
- Self Noise: 26 dB
- Signal-To-Noise Ratio: 68dB
- Impedance: 200Ω
- Length: 23.5 in.
- Weight: 0.35 lbs.
-
Controls
- Mute button
- (2) Volume controls (CH 1 and AUX)
-
Inputs
- (1) XLR microphone input
- (1) 1/8” (3.5 mm) stereo input
- (1) RCA stereo input pair (line-level)
-
Outputs
- (1) XLR output
- (2) 5V USB Type-A charging ports
- (2) 110 VAC convenience outlets (European model 1 x 220-240V convenience outlet)
-
Environmental
- Operating Temperature: 0-50°C
- Storage Temperature: -20°C - 70°C, 85% RH
-
General
- Input Voltage 100–120/220–240 V, 50/60 Hz, 1080 W
- Fuse 100–120 V: T12.5AL 250V / 220–240 V: T6.3AL 250V
- Dimensions: 24.8 x 15.0 x 47.0in (63.1 x 38.1 x 1194.8cm)
- Dimensions (footprint of base): 21.5 x 14.5in (54.6 x 36.8mm)
- Weight: 44.00 lbs. (19.96 kg)
|
Features - Each fixed-install MA-101ACT system delivers a powerful 30 watts RMS output
- 97 built-in UHF frequencies allow different channels to be set up in every classroom for interference-free operation
- Easy speaker mounting to wall or ceiling
- Detachable receiver module design allows for simple frequency band change
- Diversity reception for reliable and extended transmission
- Featuring Industry's only all-in-one, versatile MT-101ACT transmitter microphone
- Compact, ultra-lightweight design and powered via rechargeable or disposable alkaline batteries
- Same MT-101ACT transmitter microphone can be used in up to 97 different rooms
- Power on/off and volume loudness can be wirelessly remote controlled
- Can be a handheld or worn as a neck lanyard for hands-free operation with an external headset microphone
- Built-in 3.5mm(1/8“) mini-jack line-input (mono) accepts other audio sources (CD/iPodMP3/tape/mini-disc/computer) for amplification
- Amazing 24 operating hours per fast charge
- Ideal for teaching professionals and presenters in multiple classrooms, lecture halls and similar environments
| PA System | | Receiver Module | Built-in detachable 1 UHF PLL receiver module with 97 selectable channels | | The Amplifier Output Power | 40W(rms)/4O, 56W(MAX)/4O | | T.H.D. | |
|
Product Features: - Ultra-compact 8-channel PA system with dual speakers and detachable 500 Watt powered mixer
- Enormous power, incredible sonic performance, and super-lightweight
- Mixer can be used either while installed in the speaker or detached for easy positioning and access
- High-performance MP3 player included to play audio files via USB stick
- Studio-grade stereo reverb adds finishing touch to your sound
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- Broadcast-like Voice-Over-Priority Function dims music when microphones are used
- Extremely powerful 8'' woofers and 1'' compression transducers for incredible sound reproduction
- 8-channel mixer section features 4 mic/line and 2 stereo channels
- 4 high-quality mic preamps with switchable +48 V phantom power for condenser microphones
- Effective and extremely musical 2-band EQ on all channels
- Music/Speech switch to set overall system equalization
- Auto limiter prevents overload damage to power amplifier and speakers
- Storage compartment available for microphone, cables and accessories (2 x 6.1m (20') speaker cables included)
- Integrated stand mounting with 35-mm pole socket
- Switching power supply for maximum flexibility, noise-free audio, superior transient response plus low power consumption for energy savings
- High-quality components and exceptionally rugged construction ensure long life
|
General Specs
- 128 dB Max SPL
- 1400 Watt 2-way peak power
- DSP Processing with FiRPHASE
- 12" woofer, high power 2.5" voice coil
- 8 x 2" ultra compact fullrange 1.0" voice coil
- 2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)
- 23,8/52.5 kg/lbs
Acoustical Specs
FREQUENCY RESPONSE:40 Hz ÷ 20000 Hz
MAX SPL @ 1M:128 dB
HORIZONTAL COVERAGE ANGLE:120°
VERTICAL COVERAGE ANGLE:30°
Inputs/Outputs
INPUT SIGNAL: bal/unbal
INPUT CONNECTORS: XRL, Jack
OUTPUT CONNECTORS: XLR
INPUT SENSITIVITY: -2 dBu/+4 dBu
Processor Section
CROSSOVER FREQUENCIES:220 Hz
PROTECTIONS:Thermal, RMS
LIMITER:Soft Limiter
CONTROLS:Volume, Boost, Mic/Line
Cabinet Specs
CABINET/CASE MATERIAL:PP Composite
HANDLES:1 Top
GRILLE:Steel
COLOR:Black
Size/Weight
HEIGHT:623 mm / 24.53 inches
WIDTH:400 mm / 15.75 inches
DEPTH:460 mm / 18.11 inches
WEIGHT:23.8 kg / 52.47 lbs
System Parameters
TOTAL POWER:1400 W Peak, 700 W RMS
HIGH FREQUENCIES:400 W Peak, 200 W RMS
LOW FREQUENCIES:1000 W Peak, 500 W RMS
COOLING:Convection
CONNECTIONS:VDE
| This kit combines the Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer with the Evolve 50 Column Speaker to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array.
Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer (Black)
The black Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and a column array full-range speaker. The powered subwoofer utilizes a 12" driver and is powered by the integrated 1000W (500W to subwoofer) amplifier, which combines with the column array to provide a frequency response of 43 Hz to 20 kHz with a maximum SPL output of 127 dB.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The EVOLVE 50 subwoofer features mic and line inputs via XLR-1/4" combo jacks, stereo RCA and 3.5mm aux input jacks, and XLR thru and mix outputs. It is Bluetooth-enabled to allow wireless streaming of music from your smartphone or tablet. The on-board DSP functions, including mode presets, 3-band EQ, sub level, and more, can be adjusted via the sub\'s rear-panel LCD display or a Bluetooth-connected mobile device. The Electro-Voice EVOLVE 50 ships with a power cord.
- EV QuickSmart Mobile application: Quickly and wirelessly configure, control, and monitor up to six EVOLVE 50 systems simultaneously, and receive immediate notification during critical performance conditions
- High-quality Bluetooth audio streaming for background music or musical accompaniment
- QuickSmartDSP provides high-quality processing via EV\'s signature single-knob user interface with LCD
- Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
Electro-Voice EVOLVE 50 Portable PA Column Array (Black)
The black Electro-Voice EVOLVE 50 Portable PA Column Array is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and the column array. The column array utilizes eight 3.5" neodymium drivers with a custom-designed waveguide, which provides consistent (120°) horizontal coverage. The column speaker array is powered by the subwoofer\'s integrated 1000W amplifier, which delivers 500W to the column array.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The column array ships with the sub pole and a carrying case.
- Ultra-wide 120° horizontal coverage via custom-designed waveguides and array-formed 40° asymmetrical vertical coverage means all acoustical energy is directed towards both sitting and standing audiences
- Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
| Frequency Response |
Column array and subwoofer
Frequency Response (-3 dB): 43 Hz to 20 kHz |
| Frequency Range |
Column array and subwoofer
Frequency Range (-10 dB): 37 Hz to 20 kHz |
| Maximum SPL |
Column Array and Subwoofer: 127 dB |
| Amplifier |
Powered Subwoofer: 1000 W total output
LF Channel Rating: 500 W |
| Crossover |
200 Hz |
| Connectors |
2 x XLR/TRS combo jack input
1 x 1/8" / 3.5 mm input
1 x Stereo RCA input
1 x Wireless Bluetooth audio input
1 x XLR Thru output
1 x XLR Mix Out output |
| Enclosure |
Sub: 0.6" / 15.0 mm plywood |
| Grille |
Steel with black powder coat |
| Color |
Black |
| Power |
Power Supply: 100 - 240 VAC, 50/60 Hz, 1.5 A
Current Rating @ 1/8 Power: 0.6 A |
| Dimensions (H x W x D) |
20.9 x 13.6 x 18.5" / 53.1 x 34.5 x 47.0 cm |
| Weight |
44.7 lb / 20.3 kg |
|
The ultimate in powerful PA sound and exciting lighting effects!
There are times when you can get by with any decent integrated PA speaker system. And there are times when only the Ultimate High Power PA system will do.
Total PA Max is for those times when only the best will do. This is a superb all-in-one PA system that has everything you need for the ultimate in powerful sound, versatile and complete hookup/connection capability, convenient ease of use and set-up versatility.
Plus, the big 15-inch woofer features LED lighting effects in several colors, so you’ll make a stunning visual impact matched only by the PA Max’s sonic firepower. Your audience will love what they hear and they’ll love what they see.
The impressive 500-watt bi-amplified, equalized sound system covers even the largest spaces with clear, vibrant sound. Its multi-channel mixer with (2) mic inputs and aux/line input lets you switch between any source you want. You can stream music from any Bluetooth® device, use the built-in music player to read music files using the USB port or SD card slot or take advantage of the on-board FM radio with 30 presets. The included microphone puts you in charge of the action and has Echo Effect for great Karaoke. It even includes a tripod stand that elevates Total PA MAX to the perfect height.
Specifications subject to change without notice.
What\'s Included
- Total PA Max
- Microphone with Cable
- Power Cable
- Safety & Warranty Manual
- Remote Control
Key Features
- All-in-one high power 500-watt bi-amplified sound system
- 15” woofer and 1” tweeter for great sound coverage
- Vibrant LED lights in several colors pulse, freeze or fade to beat of music
- Multi-channel mixer with (2) mic inputs and (1) aux/line input
- Separate bass and treble controls for precise tonal adjustment
- Dual microphone inputs, microphone and cable included
- Echo effect with microphone for Karaoke
- Streams music from any Bluetooth device
- Wireless remote enables convenient control
- USB port and SD card slot for all your digital music files
- 1/8-inch and ¼-inch inputs handle any other equipment
- Rugged construction with integrated handles and steel speaker grille
- Tripod stand (included) elevates speaker to optimum height
- Lightweight design and built-in wheels for easy transport
|
Reviews
There are no reviews yet.