Content |
- Powered lectern with built-in 2-way speaker column
- Gooseneck microphone with XLR base
- RCA line and 3.5mm playback inputs
- XLR line output
- USB-powered lamp and charging sockets
- AC convenience outlets
-
System
- 100W RMS (200W Peak) Class-D amplifier
- Bi-amp design
- (4) 5.25" full-range speakers
- (1) Horn-loaded 1 inch HF driver, 25mm voice coil
- Output Frequency Range: 80-20kHz
- Max. SPL: 112dB (@ 1m)
- Precision electronic crossover and limiter
- 2-channel audio mixer
-
Microphone
- Type: Condenser
- Frequency range: 50-16kHz
- Max. SPL: 130dB
- Self Noise: 26 dB
- Signal-To-Noise Ratio: 68dB
- Impedance: 200Ω
- Length: 23.5 in.
- Weight: 0.35 lbs.
-
Controls
- Mute button
- (2) Volume controls (CH 1 and AUX)
-
Inputs
- (1) XLR microphone input
- (1) 1/8” (3.5 mm) stereo input
- (1) RCA stereo input pair (line-level)
-
Outputs
- (1) XLR output
- (2) 5V USB Type-A charging ports
- (2) 110 VAC convenience outlets (European model 1 x 220-240V convenience outlet)
-
Environmental
- Operating Temperature: 0-50°C
- Storage Temperature: -20°C - 70°C, 85% RH
-
General
- Input Voltage 100–120/220–240 V, 50/60 Hz, 1080 W
- Fuse 100–120 V: T12.5AL 250V / 220–240 V: T6.3AL 250V
- Dimensions: 24.8 x 15.0 x 47.0in (63.1 x 38.1 x 1194.8cm)
- Dimensions (footprint of base): 21.5 x 14.5in (54.6 x 36.8mm)
- Weight: 44.00 lbs. (19.96 kg)
|
EVOX 12 is the most powerful line-source in its class and offers a particularly profound and dynamic reproduction at high levels due to the built-in 1400W power amplifier. The top section has eight high performance neodymium 4 "full-range transducers with a phase plug. As a result, the EVOX 12 has a significantly increased low-mid playback at a constant level with a wide dispersion for the highs. The 15” subwoofer delivers powerful bass sound to reinforce a big party or the kick drum of a live band. Despite high performance, the enclosure is very compact, and thanks to integrated wheels and extendable handle very easy to transport.
General Specs
1400 Watt 130 dB max SPL 40 Hz 20 kHz frequency response 15" Woofer 8 x 4" neodymium full-range woofer 90° x 30° slightly tilted pattern control Innovative DSP processing Pole mountable, easy set-up and transportation
Acoustical Specs
Frequency Response -3 dB: 40 Hz ÷ 20 Hz Max SPL: 130 dB Horizontal coverage angle: 90° Vertical coverage angle: 30° Fullrange: 8x4.0“, 1.0“v.c Woofer: 15“, 3.0" v.c.
Inputs/Outputs
Input connectors: Jack-XLR male Output connectors: XLR female Input sensitivity: -2 dBu / + 4 dBu
Processor Section
Crossover frequencies: 180 Hz Protections: thermal, rms Limiter: Soft limiter Controls: Volume, EQ, phase, xover
Amplifier Specifications
Total power: 1400 W PEAK High frequencies: 400 W PEAK Low frequencies: 1000 W PEAK Total power: 700 W RMS High frequencies: 200 W RMS Low frequencies: 500 W RMS Cooling: Convection Connections: VDE connector
Cabinet Specs
Cabinet Material: Baltic birch plywood 2 side, 1 top Pole Mount/Cap: Yes Colour: black
Size/Weight
Height: 2220/87.4 mm/inch20.86 mm/inch Width: 410/16.14 mm/inch Depth: 560/22.05 mm/inch Net Weight: 36.4/80.24 kg/lbs | LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
MIXER
Mic inputs
6.3 mm jack, XLR
Controls for Mic Inputs
DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level
Input Impedance Mic Inputs
14 kOhm
Input Sensitivity Mic Input
70 mV
Line input connectors
2 x RCA
Controls Line Inputs
DFX Send, EQ Hi, EQ Low, level
Input Impedance Line Inputs
4.4 kOhm
Input Sensitivity Line Inputs
- 5 dBu
Hi-Z input connectors
6.3 mm jack
Input Impedance Hi-Z Input Connectors
100 kOhm
Connector Type Monitor Line Output
2 x RCA
Controls for Monitor Line Output
Monitor Volume
Max Output Level Line Output Monitor
28 dBu
Connector Type Record Output
2 x RCA
Increased power main output (at 4 ohm)
70 W
DSP Digital Effect
DSP Number of Programs
16
DSP Controls
DFX Return, Mute switch
DSP Display Elements
Peak LED
Main Section
Main section controls
EQ Hi, EQ Low, EQ Mid, Master Volume, Phantom Power, voltage selector switch
Main section indicators
4-segment Level Meter, power LED
Mains connector
IEC socket
Operating voltage
transformer
Operating voltage
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Cabinet
Cabinet construction
Bass Reflex
Cabinet surface
texture paint
Other features
2 x 16 mm pole mount socket, rubber feet
| Details
This pack comes complete with a 30w battery powered PA, carry case and a wired MM-107 microphone. An additional line input jack allows an external music or speech source to be used. The unit is small and light enough to be carried - an included shoulder strap aids portability.
The MA-101C also has a 5/8" thread insert to fit directly onto the MS-30 tripod stand. The rechargable battery provides up to 8 hours continuous use from a single 4-hour charge. The unit will charge whenever connected to mains power using the supplied PSU.
The MIPRO MA-101C 45W Portable PA System with MM-107 Dynamic Wired Microphone and Rechargeable Battery is designed for small-sized live reinforcement applications such as for schools, places of worship, corporate training, paging, trade shows, street performances, fitness instruction, and other comparable situations. This portable 4.8 lb PA system can be hand carried using the built-in handle, by the included adjustable padded shoulder strap, or mounted on a table or microphone stand. It will last on standby up to 10 hours when powered by its built-in lithium rechargeable battery and can recharge in approximately 4 hours. The unit may also be powered by an AC adapter.
For sound amplification, the device uses a 45 W class-AB amplifier to power a 5" full range driver. A 3.5 mm input jack allows for connection of an external MP3, iPod, CD player, or other line-level source. A 3.5mm output allows for connection to the input of an external sound device.
The PA system features a wired microphone that can be connected using a 1/4" unbalanced microphone input. The system comes with a wired MM-107 hypercardioid dynamic microphone with a 6' cord.
Portable PA System
Speaker Configuration |
1 x Full-Range Loudspeaker |
Number of Input Channels |
2 (1 x Mono, 1 x Stereo) |
Amplifier Power Rating |
40 W |
Amplifier Class |
Class-AB |
Speakers
Enclosure Type |
Sealed |
Full-Range Driver |
5" / 12.7 cm |
Speaker Sensitivity |
95 dB |
Signal Processing
Semi-Parametric EQ |
None |
Filters |
None |
Microphone
Form Factor |
1 x Handheld |
Capsule |
Dynamic |
Polar Pattern |
Hypercardioid |
Outputs |
1 x 1/4" TS Unbalanced |
Microphone Sensitivity |
-54 dBV/Pa |
Performance
Frequency Response |
System:
60 Hz to 15 kHz
Handheld Microphone:
50 Hz to 16 kHz |
I/O Impedance |
Mic Output:
400 Ohms |
THD |
<1% |
Connectivity
Audio I/O |
1 x 1/4" TS Mic Input
1 x 1/8" / 3.5 mm TRS Line Input |
Power
Battery Type |
Rechargeable 14.8 V Lithium |
Approximate Battery Life |
10 Hours (Standby) |
Battery Charging Time |
4 Hours |
Internal Battery Capacity |
2.6 Ah |
AC Input Power |
100 to 240 VAC, 50 / 60 Hz |
Physical
Cable Length |
Handheld Microphone:
6.0' / 1.8 m |
Transport Options |
1 x Handle (Top) |
Mounting |
1 x Mic Stand Socket (Bottom)
1 x Shoulder Strap (Top) |
Dimensions |
Handheld Microphone:
2 x 7" / 51 x 178 mm
System:
6.3 x 7 x 11.2" / 160 x 178 x 285 mm |
Weight |
Handheld Microphone:
8.3 oz / 235 g
Speaker:
4.8 lb / 2.2 kg |
| The 5-channel Behringer EUROPORT PPA200 features quality sound in a compact, portable briefcase-style 200-watt PA system that is designed to be fast and easy to set up. Intended for corporate events, seminars, working musicians and more, the EUROPORT PPA200 comes with compact speakers that each contain a 4" woofer and a 1" tweeter. It has inputs for 2 microphones, an mp3 player, or up to 5 musical instruments.
The unit also features a KLARK TEKNIK effects processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and more. The FBQ Feedback Detection System is designed to reveal frequencies that are causing feedback so they can then be attenuated with the built-in stereo 7-band graphic EQ.
The EUROPORT PPA200 is also "wireless-ready" for use with the Behringer ULM digital wireless microphones (not included). The package also comes with a BEHRINGER XM1800S microphone, mic clip and 20' cable.
Compact speakers each contain 4" woofer and a 1" tweeter, 17 mm stand insert suitable for use with standard microphone stand and come with 12' cables Two "Invisible" mic preamps with phantom power for condenser microphones, 1 mic/inst channel and 1 stereo channel with separate Aux input Switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
Behringer PPA200 specs
Inputs |
2x XLR
3x 1/4" TRS, balanced
1x 1/4" TS, unbalanced
2x RCA, unbalanced
1x 2-channel Behringer ULM digital wireless |
Outputs |
2x RCA, unbalanced
1x 1/4" TS, unbalanced mono
1x 1/4" TRS, stereo |
Wireless |
USB dongle (not included): USB socket accepts signals from max. 2x Behringer ULM mics
Signal indicator LED: 2 (green) |
Maximum Power Output |
2x 100 W @ 4 ohms |
Frequency Response |
40 Hz to 25 kHz |
Signal to Noise Ratio |
85 dB, A-weighted |
Outputs |
1/4" TS, left and right |
Speakers |
4" woofer and 1" tweeter |
Function Controls |
FBQ: Activates the FBQ Feedback Detection System
EQ: Activates graphic EQ |
EQ Type |
7-band graphic |
Effects |
Type: Klark Teknik
Converter: 24-bit Delta-Sigma
Sampling frequency: 40 kHz
Display: 2-digit, 7-segment |
Power Supply |
USA/Canada: 100-120 V~, 50/60 Hz (T3.15 A H 250 V)
Japan: 100 V~, 50/60 Hz (T3.15 A H 250 V)
UK/Australia/Europe/Korea/China: 220-240 V~, 50/60 Hz (T3.15 A H 250 V)
Power consumption @ 1/8 rated power: 45 W
Mains connection: Standard IEC receptacle |
Dimensions |
13.4 x 24.1 x 7.3" (339 x 613 x 186 mm) |
Weight |
26.5 lb (12.0 kg) |
|
The ELS GO 8BT Bluetooth Speaker from American Audio is a battery-powered 8" active speaker which features Bluetooth, USB, and SD connectivity in addition to XLR, RCA, and 1/8" inputs, enabling you to connect it to a wide range of audio sources. This speaker features an output of 100W RMS and is powered by a built-in battery, which can be charged either via the 12 VDC barrel connector or via the IEC input. Applications include use in DJ environments, rental markets, and small & mid-level parties.
Supports Bluetooth, USB, and SD card audio sourcesLine inputs and outputsMaster volume controlBi-amp amplificationXLR microphone input and volume control for use as a small PA speakerApplications include use in DJ environments, rental markets, and small & mid-level parties
Speaker Size |
8“ |
Speakers |
1 x Titanium driver 1 x Woofer |
RMS Power Output |
100 W |
Input Connectors |
1 x XLR-1/4" combo jack (channel 1) 1 x 1/4" Phone jack (channel 2) 1 x RCA stereo (L/R) (channel 3/4) 1 x 1/8" Phone jack (channel 5/6) IEC male, AC power DC barrel |
Output Connectors |
1/8" line output |
Audio |
Line/mic inputs USB SD slot Bluetooth |
Frequency Response |
50 Hz - 20 kHz |
Nominal Dispersion |
LF: 8" (185 mm) Non-press paper cone with cloth suspension 1" (25.5 mm) KSV coil, 20 oz magnet |
Input Sensitivity |
Mic: 3 mV Instrument: 20 mV Line: 300 mV |
Output Sensitivity |
92 dB (1m/1w) |
SPL |
110 dB (max.) |
Input Impedance |
Mic: 4.4 kOhms (balanced), 2.2 kOhms (unbalanced) Instrument: 470 kOhms Line 10 kOhms |
S/N Ratio |
Line: 100 dB Mic: 80 dB |
Crossover |
Low Pass: 20 kHz Low Cut: 60 Hz |
Channel EQ |
Bass & Treble: Shelving Filter ± 20 dB (± 3 dB @ 1 kHz) |
Battery |
Battery Life: 6 h Battery Charge Time: 4.5 h |
Operating Temperature |
41 to 95˚F (5 to 35˚C) |
Operating Humidity |
25 to 85% RH (non-condensation) |
Storage Temperature |
4 to 140°F (-20 to 60°C) |
Power Options |
Internal battery 115 - 230 VAC, 50/60 Hz 12 VDC |
Dimensions |
12.50 x 12.25 x 18.00" (32.0 x 31.0 x 45.5 cm) |
Weight |
17 lb (8 kg) |
|
Reviews
There are no reviews yet.