| Content | Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
|
Bluetooth Receiver
- Magnetic holder on the back
- 2 Symmetrical 6.3 mm jack outputs
- Dimensions (W x D x H): 100 x 64 x 34 mm
- Weight: 116 g
- Includes power supply
|
The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.
The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.
• Mini component wireless DAC
• High performance headphone amplifier
• AptX Bluetooth wireless streaming
• ESS ES9016 Sabre DAC chipset
• High precision digital reclocking
• Up to 24/384 via USB
• Up to 24/192 via coax
• Up to 24/96 via optical
• DSD128 via USB
• Isolated digital and analog direct coupled circuits
• Individually regulated power supplies
• 2x digital coax inputs Fixed and variable
• Headphone output (30 to 600Ω)
• 4 layer PCB
• Aluminum case with non‐slip rubber base
• 12V external power supply included
• Mini remote control included
• Weight: 2.4 lbs (1.1kg)
• Packaged weight: 5 lb (2.1 kg)
• Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x
60mm)
• EAN: 506013360254‐5
Supported sample rates:
- USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
- Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bluetooth: SBC, AAC, aptX, aptX:LL
- Bit Depth : 16:bit, 24:bit
- Headphone : 30Ω : 600Ω, 3.5mm plug
- Power requirements: 18W max
- Dimensions: W194 x H44 x D124mm
- Weight: 1.1kg
|
Amplifier power (watts): 20 watts (RMS)
Controls: Volume & power
W x H x D (mm): 387 x 155 x 130
Weight (kg): 2.25
Frequency response (Hz): 70 - 18,000
Connections: Additional stereo input via 3.5mm minijack for use with non-Bluetooth enabled devices
Finish: Black |
Model A5
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 100mm (4.0in) Mid and low range
Frequency response 47Hz - 22kHz ±3dB on reference axis
Frequency range -6dB at 40Hz and 24kHz
Amplifier power output 2x 20W (tweeter)
2x 20W (midrange)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 48W
Standby power consumption |
MusicCAST Desktop Wireless Client with built in IEEE802.11b for wireless communication with music server, Built-in Hi-Fidelity digital amplifier for any type of speaker configuration, On-screen video out for video monitor display, Subwoofer output for powered subwoofer, LAN (Ethernet) network connection and a Large LCD display for ease of use.
Wireless Digital Audio Terminal
The MusicCAST MCX-A10 clients provide a vast assortment of connections including speaker outputs, left/right audio pre-outs, subwoofer output, and video output so that you can view the on-screen display on a larger monitor.
MusicCAST Concept
* IEEE802.11b wireless communication with music server
* Built-in Hi-Fidelity digital amplifier for any type of speaker configuration
* On-screen video out for video monitor display
* Line-out audio output to connect to existing audio components
* Subwoofer output for powered subwoofer
* Audio input to connect additional source units
* LAN (Ethernet) network connection
* Large LCD display for ease of use
|
Reviews
There are no reviews yet.