Denon Professional DN-202WT-Wireless audio transmitter

188.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Denon Professional’s Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer. For applications […]

 

Read more

Denon Professional’s Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.

For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.

Features

  • For use with DN-202WR
  • Sends audio up to 30m (100 ft) without wires
  • XLR and 1/4” audio inputs
  • Able to broadcast to multiple receivers (sold seperately)
  • External, articulating antennas ensure optimum transmission and reception
  • Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more

Package Contents

  • DN-202WT
  • Power adapter (5VDC, 3A, center-positive)
  • User Guide
  • Safety and warranty manual
Weight 0.00 kg

Reviews

There are no reviews yet.

Be the first to review “Denon Professional DN-202WT-Wireless audio transmitter”

Your email address will not be published. Required fields are marked *

Quick Comparison

Denon Professional DN-202WT-Wireless audio transmitter removeARCAM MiniBlink Wireless Bluetooth System removeDenon Professional DN-202WR Wireless audio receiver removeARCAM irDAC II Wireless Bluetooth DAC removeDefinitive Technology W7 wireless system removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver Black remove
NameDenon Professional DN-202WT-Wireless audio transmitter removeARCAM MiniBlink Wireless Bluetooth System removeDenon Professional DN-202WR Wireless audio receiver removeARCAM irDAC II Wireless Bluetooth DAC removeDefinitive Technology W7 wireless system removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver Black remove
Imagepro-ject-audio-bluetooth-receiver-box-e
SKU134.303miniBlink134.302irDACBTDefinitive Technology W7BT BOX E
Rating
Price 188.00 incl. GR VAT144.00 incl. GR VAT 119.00 incl. GR VAT470.00 incl. GR VAT459.99 incl. GR VAT139.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Wireless music streaming with almost CD-quality
  • BT 2.1 + EDR
  • Supports aptX & SBC codecs
  • Easy to install and use
  • Fast auto pairing (3 to 5 seconds)
  • Up to 8 different BT sources are memorized
  • Works within a range of approximately 10 meters
  • RCA analogue and Toslink digital outputs (switchable)
  • Outboard power supply included
  • Black or White casing
ContentDenon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer. For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues. Features
  • For use with DN-202WR
  • Sends audio up to 30m (100 ft) without wires
  • XLR and 1/4” audio inputs
  • Able to broadcast to multiple receivers (sold seperately)
  • External, articulating antennas ensure optimum transmission and reception
  • Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
  • DN-202WT
  • Power adapter (5VDC, 3A, center-positive)
  • User Guide
  • Safety and warranty manual

Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.

Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.

The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!

Specifications
  • DAC
    Burr-Brown/TI PCM5102
  • Frequency Response
    10Hz-20kHz, +0 -0.2dB
  • Total Harmonic Distortion + Noise
    0.002%
  • Signal-to-noise ratio (A-weighted)
    106dB (24-bit)
  • Maximum output level
    2.15V RMS
  • Supported CODECS
    SBC, AAC, aptX™
  • Power requirements
    0.7W maks.
  • Dimensions
     L 60 x W 30 x H 75mm
  • Weight
    40g
  • EAN/UPC code
    5 060133 602194
Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer. For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
  • For use with DN-202WT
  • Receives audio up to 30m (100 ft) without wires
  • Use multiple DN-202WR in a system for more coverage
  • XLR and 1/4” audio outputs
  • External, articulating antennas ensure optimum transmission and reception
  • Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more

The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.

The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.

• Mini component wireless DAC
• High performance headphone amplifier
• AptX Bluetooth wireless streaming
• ESS ES9016 Sabre DAC chipset
• High precision digital reclocking
• Up to 24/384 via USB
• Up to 24/192 via coax
• Up to 24/96 via optical
• DSD128 via USB
• Isolated digital and analog direct coupled circuits
• Individually regulated power supplies
• 2x digital coax inputs Fixed and variable
• Headphone output (30 to 600Ω)
• 4 layer PCB
• Aluminum case with non‐slip rubber base
• 12V external power supply included
• Mini remote control included
• Weight: 2.4 lbs (1.1kg)
• Packaged weight: 5 lb (2.1 kg)
• Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x
60mm)
• EAN: 506013360254‐5

Supported sample rates:

  • USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
  • Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
  • Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
  • Bluetooth: SBC, AAC, aptX, aptX:LL
  • Bit Depth : 16:bit, 24:bit
  • Headphone : 30Ω : 600Ω, 3.5mm plug
  • Power requirements: 18W max
  • Dimensions: W194 x H44 x D124mm
  • Weight: 1.1kg

 



Driver Complement: One front-firing x 4.0” midwoofer, Four x 1.0” aluminum dome tweeters, Two x 4.0” bass radiators Amplification: 1 x 30W Woofer, 4 x 15W tweeters Wireless Connectivity: 2.4GHz & 5.8GHz Inputs: Optical, Analog, Ethernet, USB-A for firmware updates and phone charging

Bluetooth Receiver

  • Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box E
Effective range of wireless signal up to 10m in case of direct visibility
Line-level output: 1 x RCA/Cinch
Output voltage: 2Vrms
Digital outputs: 1 x optical (TOSlink®)
BT version: 2.1 + EDR
Supported codecs: aptX, SBC, A2DP BT profile
Frequency: 2402 ~ 2480 MHz
Sensitivity: - 84dBm
Maximum TX power +4dBm
Outboard power supply: 9V/300mA DC
Power consumption: 100mA/9V DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight: 250g without power supply
Weight0.00 kg1.00 kg0.60 kg1.00 kg4.00 kg300 kg
DimensionsN/AN/AN/AN/AN/A12 × 3.2 × 10 cm
Additional information
Weight 0.00 kg
Weight 1.00 kg
Weight 0.60 kg
Weight 1.00 kg
Weight 4.00 kg
Weight 300 kg
Dimensions 12 × 3.2 × 10 cm