Denon Professional DN-306X Mixer 6 channel with Priority

165.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 134.068 Category:
The DN-306X is a compact 6-channel mixer. It features combo XLR/TRS input jacks with switchable MIC, LINE, and phantom power along with two XLR line outputs. Added features include mic one priority and a 3-band equalizer on the output. The DN-306X is compact, versatile and ready to solve any number of audio installation challenges. Six-channel […]

 

Read more

The DN-306X is a compact 6-channel mixer. It features combo XLR/TRS input jacks with switchable MIC, LINE, and phantom power along with two XLR line outputs. Added features include mic one priority and a 3-band equalizer on the output. The DN-306X is compact, versatile and ready to solve any number of audio installation challenges.

  • Six-channel mixer in one rack space
  • XLR/TRS combo input jacks with phantom power
  • Two XLR line outputs
  • Master level control and 3-band equalizer
  • Mic one priority control
  • Audio Specification
    • Signal-to-Noise Ratio: > 94dB
    • Max Output Level: +24dBu
    • Inputs: (6) combo XLR/TRS
    • Phantom Power: 48VDC
    • Maximum Voltage Gain: 60dB
  • Mic Inputs
    • Max Input Level: -20dBu
    • Sensitivity: -40dBu
    • Impedance: 1.4kΩ
  • Line Inputs
    • Max Input Level: +24dBu
    • Impedance: 10kΩ
  • Equalizer
    • High: ± 15dB @ 12kHz
    • Mid: ± 12dB @ 2.5kHz
    • Low: ± 15dB @ 80Hz
  • Environmental
    • Operating Temperature: 40 – 140°F (5 – 60°C)
    • Operating Humidity: 25 ~ 85% (non-condensing)
  • General
    • Power Requirement: 100 ~ 240VAC 50/60Hz
    • Power Consumption: < 5W
    • Dimensions: 19.0 x 7.7 x 1.7” (483 x 195 x 44mm)
    • Weight: 5.6 lbs. (2.5 kg)
Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “Denon Professional DN-306X Mixer 6 channel with Priority”

Your email address will not be published. Required fields are marked *

Quick Comparison

Denon Professional DN-306X Mixer 6 channel with Priority removeSOUNDCRAFT GB2 24CH 24MONO+ 2STEREO MIXING CONSOLE removeSOUNDCRAFT GB2R 16-Channel Rackmount MIXING CONSOLE removeSOUNDCRAFT RZ-2701 200M OPTICAL FIBRE CABLE removeDYNACORD CMS 1000-3 Sound Desk 10 Channels removeSOUNDCRAFT EFX-8 Mixing Desk 8CH mono & 2CH stereo remove
NameDenon Professional DN-306X Mixer 6 channel with Priority removeSOUNDCRAFT GB2 24CH 24MONO+ 2STEREO MIXING CONSOLE removeSOUNDCRAFT GB2R 16-Channel Rackmount MIXING CONSOLE removeSOUNDCRAFT RZ-2701 200M OPTICAL FIBRE CABLE removeDYNACORD CMS 1000-3 Sound Desk 10 Channels removeSOUNDCRAFT EFX-8 Mixing Desk 8CH mono & 2CH stereo remove
Image
SKU134.068GB2 24CHGB2R 16CHRZ2701E009271SPIRIT EFX8
Rating
Price 165.00 incl. GR VAT 2,171.00 incl. GR VAT 1,456.00 incl. GR VAT 4,200.00 incl. GR VAT 1,998.00 incl. GR VAT 410.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The DN-306X is a compact 6-channel mixer. It features combo XLR/TRS input jacks with switchable MIC, LINE, and phantom power along with two XLR line outputs. Added features include mic one priority and a 3-band equalizer on the output. The DN-306X is compact, versatile and ready to solve any number of audio installation challenges.

  • Six-channel mixer in one rack space
  • XLR/TRS combo input jacks with phantom power
  • Two XLR line outputs
  • Master level control and 3-band equalizer
  • Mic one priority control
  • Audio Specification
    • Signal-to-Noise Ratio: > 94dB
    • Max Output Level: +24dBu
    • Inputs: (6) combo XLR/TRS
    • Phantom Power: 48VDC
    • Maximum Voltage Gain: 60dB
  • Mic Inputs
    • Max Input Level: -20dBu
    • Sensitivity: -40dBu
    • Impedance: 1.4kΩ
  • Line Inputs
    • Max Input Level: +24dBu
    • Impedance: 10kΩ
  • Equalizer
    • High: ± 15dB @ 12kHz
    • Mid: ± 12dB @ 2.5kHz
    • Low: ± 15dB @ 80Hz
  • Environmental
    • Operating Temperature: 40 - 140°F (5 - 60°C)
    • Operating Humidity: 25 ~ 85% (non-condensing)
  • General
    • Power Requirement: 100 ~ 240VAC 50/60Hz
    • Power Consumption: < 5W
    • Dimensions: 19.0 x 7.7 x 1.7” (483 x 195 x 44mm)
    • Weight: 5.6 lbs. (2.5 kg)

The Soundcraft GB-2 (2-bus) 24 Channel Console is designed for installed sound and A/V applications that donʼt require all the sophisticated functionality of the GB4 and GB8.

However the Soundcraft GB-2 24 Channel Console is a genuine GB Series console in every respect, with sound quality assured by GB30 Mic Pre and Equaliser designs, and reliability by the same rugged build quality that has made the GB4 and GB8 so dependable in demanding professional applications.

Along with six Aux busses and an integral 6 x 2 matrix, four subgroups are provided as two stereo pairs, with a unique facility for adjusting the width of the stereo signal across the stereo mix. The channel pan settings are retained on the group outputs, while the degree of stereo separation to the mix bus is independently adjustable from full stereo through to mono.

The GB2 also features two stereo input channels, with separate mic and line inputs. In normal use, the mic inputs are routed to the local channel and the line inputs act as a stereo return to the mix bus. Selecting the line input to the local channel overrides the mic inputs.

The Soundcraft GB-2 (2-bus) 24 Channel Console Main Features Include:

  • 24 channel frame size
  • 12 busses
  • 2 full feature stereo channels
  • 2 stereo returns (on stereo channels)
  • 6 Aux sends
  • 4 sub groups (paired)
  • 6x2 output matrix
  • GB30 mic preamp and precision equalisation circuitry
  • Direct outputs on every channel
  • Talkback facility
  • 100mm faders
  • Switchable 48V phantom powering on every channel
  • 100Hz high pass filter
  • 12-segment LED metering
  • Record output
  • Width: 1013mm (39.88“)
  • Weight: 25kg (55.1lbs)

16 mono inputs to a stereo mix output. Rackmount version of the GB2.

The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R. This 19 inch rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also find friends in Broadcast where its high quality and feature set will be very appealing.

Features
19 inch Rackmountable console

16 channel version, with 16 mono inputs, Stereo Mix and Mono Sum Outputs and 6 Aux Outputs. - Total Inputs to Mix: 22

12.2 channel version, with 12 mono inputs and 2 stereo inputs, 1 Stereo Sub Group Output, Mix and Mono Sum Outputs, and 6 Aux Outputs - Total Inputs to Mix: 26 (when Mics used on stereo input)

Rotatable connector pod for top or rear cable entry

8 (GB2R-16) or 10 (GB2R-12.2) busses

2 full feature stereo inputs (GB2R-12.2 version)

GB30 Mic preamp and precision EQ on inputs

Switchable +48V phantom power on every mic input

100Hz Hi-pass filter

Direct outputs on every channel

100mm faders

Stereo Mix Output and separate Mono Sum output

Record output

Internal Universal switched mode PSU

Available in two variants, the GB2R offers either 16 mono inputs to a stereo mix output, or a 12.2 version with 12 mono inputs, two full-feature stereo inputs and 2 group busses, each model having 6 auxiliary sends.

As always with Soundcraft consoles, emphasis has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. The Soundcraft GB2R inherits both the GB30 Mic preamplifier and GB30 Equaliser designs from the GB4 and GB8.

For ease of installation, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19 inch rack.

On the stereo inputs on the 12.2 model, connectors are provided for both Mic and Line inputs. With Mic signals routed to the local channel, the Line inputs are available as stereo returns to the main mix bus. Two stereo returns and a 2-track (for example CD replay) input are provided, which means that the GB2R-12.2 model can offer up to 26 inputs to mix in a mixer just 19" (485mm) wide.

Every input has a pre/post switchable direct output for recording or effects sends, while an internal universal voltage PSU avoids external power supply connections.

The whole GB Series carries the high quality hallmark with which Soundcraft is synonymous, with engineering and design as you'd expect from this high-end manufacturer. Careful attention has been given to the mechanical construction, to ensure reliability and ruggedness under strenuous conditions, with all input modules being constructed with individual vertically-mounted pcb's, fitted to the steel chassis front panel with individually-nutted potentiometers.

MIC/LINE Input Channels
The XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete preamp.
The +48V phantom power for condenser microphones can be switched in groups of six.
The Line Input and Channel Insert are implemented as jack sockets.
The Gain can be controlled in the range 0-60 dB.
The switchable Lo Cut filter (80Hz, 18dB/oct.) serves to eliminate low-frequency noise. A very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, the voice can be powerfully emphasized in the mix.
Optimized for ease-of-use, the 3-band semi-parametric equalizer makes it possible even for unpracticed users to perform the requisite corrections swiftly and intuitively.
With their extended buss structures, the CMS3 mixers offer very flexible configuration options. In all, 6 AUX busses are available in each case:
2 (FX) are assiged to the two effects devices;
2 (AUX) can be configured either as monitor or effects sends by means of a switch in the Main section;
2 (MON) are designed as monitor sends, each being equipped with a sweepable anti-feedback filter in the Master section.
MUTE and PFL switches, each with its own LED, make it possible to mute each input channel individually and/or listen to its pre-fader signal.
Each channel offers a Signal Present and Peak LED for level control.
The channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a practice-optimized control characteristic.
All potentiometers and faders are high-quality components from ALPS.
Stereo MIC/LINE Input Channels
The stereo input channels are equipped in much the same way, but optimized, naturally, to carry stereo signals.
Two of the four stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched in parallel for CD or MP3 players.
The two other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 and USB 3-4
Separate Gain controls are provided for the Stereo Line and Mic inputs to permit them to be used in parallel if desired.
Three-band tone controls are provided, and a Balance control replaces the PAN control found in the mono channel strips.
MASTER
In the Master Section, too, the CMS3 mixers are lavishly equipped.
The 11-band stereo equalizer can be routed to the Master channels or else to either or both of the Monitor Sends according to choice.
The FX1+2 Returns as well as the AUX1+2 and MON1+2 Sends are on faders just like the Master L/R signal, which makes for comfortable and intuitive operation.
The Master B signal is available pre or post MASTER L/R fader and can be mono-summed if desired. The Master signal is also available on the REC Send cinch (RCA) output with level control.
The level meters of the CMS3 comprise two LED chains of 12 LEDs each. The display range covers 40 dB; what is shown is the level in dBu at the master outputs. When the PFL switch is activated, the left-hand LED chain shows the internal level of the master buss in dBu.
The Standby switch mutes all channels e.g. during pauses, with only the 2TRACK-to-Master input remaining active for the playback of interval music.
A 4-pin XLR socket is provided for the connection of a standard 12V/5W gooseneck lamp.
DIGITAL USB 2.0 AUDIO INTERFACE  
The USB 2.0 port serves as a digital audio interface between the CMS3 and a PC or Mac. Four channels can be transmitted in either direction simultaneously. This interface can therefore be used either for the input of audio signals (e.g. for playback or interval music) or else for live- or studio-recording applications. It is configured by selecting the relevant setting in the menu.
For the use of the CMS3 with a PC or Mac, a free Cubase LE license as well as the requisite USB drivers are included free-of-charge on the supplied DVD.
PC MIDI Interface
The CMS3 also offers a fully-featured PC MIDI interface.
The MIDI input also supports the remote switching of both internal effects units using a master keyboard or MIDI footswitch.
Professional Effects, OLED Display and Processing Menus
The CMS3 has two integrated stereo multi-effects processors that work independently of one another, each offering 100 effects algorithms optimized for live performance, the most important parameters of which are editable.
Linear 24-bit AD/DA converters and 48-bit double-precision processing guarantee the finest studio quality based on state-of-the-art technology.
The 100 program locations of each device are packed with high-quality reverbs, halls and plates that deliver professional results in live performance on stage as well as in both studio and home recording environments.
Other presets include Echo/Reverb and Chorus/Echo combinations, a variety of delay, flanger, chorus and doubling algorithms, as well as special reverb and delay programs. When a delay effect is active, the delay time can be synchronized to the beat of the music using the TAP key.
Edited effects programs can be stored in the 20 User memories offered by each device, assigned names, and later selected and used in the same way as the presets.
The large, high-contrast OLED display is easily read from a wide range of viewing angles—even in very bright surroundings. The operation of the effects units and processing menus is intuitive and made easier still through the use of soft keys and a rotary encoder.
Processing Menus
For the basic settings, configuration, use of the effects and special functions, a wide variety of editing options can be selected from the clearly arranged menus.
Innovative Solution for Protection and Transportation
Optionally available for the CMS 1000 and 1600 is a very robust plastic lid with an integrated handle—a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.
For the CMS 2200, due to its greater size, a flight-case solution is recommended (available as a further option is a dust cover: the DC-PM2200-COVER).
Accessories
For rack installation of the CMS 1000 (or table installation of the models 1600 and 2200), the mounting kit RMK 1000-3 is available.
Other accessories include the gooseneck light DC-LITLITE-4P and the DC-FS11 ON/OFF footswitch for the effects units.

Soundcraft EFX



(EFX8, EFX12)

The Soundcraft EFX™ Series combines all the features of the popular Soundcraft EPM™ mixer with a built-in 24-bit, digital Lexicon® effects processor, expanding the Soundcraft low-cost, multipurpose compact range.

The Soundcraft EFX mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level.

The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.

The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the companyʼs 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles).The Soundcraft EFX also offers all the features of the Soundcraft EPM most notably a configurable aux send, XLR and ¼" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone

Key Features:
  • 8+2 channel frame sizes
  • Built-in 24 bit Lexicon digital effects processor
  • 32 FX settings
  • Tap Tempo and FX setting store function
  • 1 FX send on each channel
  • 1 configurable auxiliary bus
  • XLR-type and ¼” metal jack connector sockets
  • RCA phono stereo playback inputs and record outputs
  • 3-band EQ with a swept mid on mono inputs
  • 3-band EQ on stereo inputs
  • TRS insert sockets and inserts on all mono inputs
  • Ten-segment LED output metering
  • Intuitive and comprehensive solo system
  • Headphone output
  • Easily rack mountable
The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.
Weight3.00 kg33.00 kg5.00 kg1.00 kg9.20 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 33.00 kg
Weight 5.00 kg
Weight 1.00 kg
Weight 9.20 kg
Weight 3.00 kg