Content |
The Denon Professional DN-350MP will interface to any sound system via balanced or unbalanced outputs, and play audio files from the USB port (flash drive or HDD), 3.5mm stereo AUX input, or from a Bluetooth device. This 1RU player also features a smartphone shelf to hold your device while it is paired via Bluetooth and charging from the USB charging port conveniently located on the front panel. Up to (8) Bluetooth devices can be stored in the player\'s memory. There is also an on-board 60W mono amplifier for connection to 4-ohm, 70V and 100V speaker systems with the outputs on a Euroblock connector. And, for convenience, the amplifier has a level control and ON/OFF switch located on the rear of the unit. An included remote Bluetooth antenna attaches to the rear of the DN-350MP via a BNC jack. The DN-350MP is perfect for retail spaces, sports bars, and house-of-worship applications.
- Plays files from Bluetooth, USB and 3.5mm inputs
- Smartphone shelf and USB charging port
- Balanced XLR and unbalanced RCA outputs
- 60W mono amplifier with level control and ON/OFF switch
- Supports 4-ohm, 70V and 100V speaker systems
- BNC antenna input for Denon remote Bluetooth antenna
-
Audio Specification
-
XLR Audio Output
- Frequency Response: 10 - 20,000 Hz ±1.0dB
- Signal-to-Noise Ratio: > 95dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: +4dBu ±0.2dBu (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.01% (10 - 20,000 Hz)
- THD + Noise: < 0.025% (10 - 20,000 Hz)
- Max Noise Level: < 20 uVrms (10 - 20,000 Hz)
-
RCA Audio Output
- Frequency Response: 10 - 20,000 Hz within ±1.0dB
- Signal-to-Noise Ratio: > 100dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: -10dBv ±0.2dBv (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.02% (10 - 20,000 Hz)
- THD + Noise: < 0.06% (10 - 20,000 Hz)
- Max Noise Level: < 2 uVrms (10 - 20,000 Hz)
-
Amplified Audio Output
- Max Power Output: 60W MONO (10 - 20,000Hz)
- Frequency Response: 10 - 20,000Hz within ±1.0dB
- Outputs Available: 4Ω direct / 70V or 100V
- Dynamic Range: > 85dB (10 - 20,000 Hz, A-weighted)
- Signal to Noise: > 85dB (1 kHz, 0dB, A-weighted)
- THD @ 1W: < 0.01% (10 - 20,000Hz)
- THD @ 60W: < 0.5% (10 - 20,000Hz)
- Max Noise Level: < 275 uVrms (10 - 20,000Hz)
-
Audio File / Signal
- File Format: WAV / MP3 / AIFF / WMA
-
Sampling Rate
- WAV/WMA: 44.1kHz / 48kHz
- MP3/M4A: 44.1kHz
-
Bit Rate
- WMA: up to 192 kbps
- WAV: 16-bit depth
- MP3/M4A: up to 320 kbps
- ID3 Tag: MP3 V1.x - 2.4
-
USB Storage Device
- File System: FAT 16/32
- Media Type: Flash, HDD
-
General
-
Power Requirement
- Input voltage: 100 - 240V, 50/60 Hz
- Connection: IEC cable
- Power Consumption (Idle Mode): < 5W
- Power Consumption (Max): 120 W
- Operating Temperature: 5°C - 45°C (41°F - 113°F)
- Operating Humidity: 25 - 85% (non-condensing)
- Dimensions: 19.00“W x 13.66“D x 1.73“H (483 x 347 x 44mm) with rack ears attached
- Weight: 9.0 lbs (4.1kg)
|
Multi-purpose, multi-function mixer/power amplifiers specifically designed for maximum versatility and cost-effective high-performance are ideal units for any PA requirement in locations such as schools and offices and other intermediate size environments. A choice of different power outputs are offered as well as functions such as paging and dual zone coverage.
Specification | |
Power Source |
AC mains 50/60Hz, or 24V DC (M4 screw terminal) |
Output |
120W |
Power Consumption |
AC operation: 158W (rated output), 66W (EN60065) 24V DC operation: 7.0A (rated output), 2.8A (EN60065) |
Frequency Response |
50 - 20,000Hz ±3dB |
Distortion |
Under 2% at 1kHz, rated power |
Input |
MIC 1: -60dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack DIN socket (5 pins) MIC 2, 3: -60dB(*1), 600Ω, electronically-balanced, combined type of XLR-3-31 Equivalent and phone jack AUX 1(MOH): -20dB*, 10kΩ, unbalanced RCA pin jack AUX 2: -20dB(*1), 10kΩ, unbalanced, RCA pin jack AUX 3: -20dB(*1), 10kΩ, unbalanced, RCA pin jack combined type of XLR-3-31 and phone jack TEL(*2): -20dB*1, 10kΩ, electronically-balanced, M3 screw terminal |
Output |
REC: 0dB(*1), 600Ω, unbalanced, RCA pin jack LINE 1,2(*3): 0dB(*1), 600Ω, unbalanced, RCA pin jack MOH: 0dB(*1), 600Ω transformer balanced, M3 screw terminal SPEAKER SELECTOR: 2 zone, high impedance (100V line/83Ω), individual selector switch, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100V line/83Ω),M4 screw terminal Low impedance (4 - 16Ω), M4 screw terminal(Both Low and High impedance terminals cannot be used at the same time.) |
Phantom Power |
ON or OFF for each MIC 1 - 3 with switch setting |
S/N ratio (Band Pass: 20 - 20,000Hz) |
Over 100dB (Master volume: min) Over 76dB (Master volume: max) Over 60dB (MIC 1 - 3)) Over 76dB (AUX 1 - 3) Over 90dB (TEL) Over 96dB (EMERGENCY) |
Control Input |
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz TEL: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 5mA, M3 screw terminal EMERGENCY (*4): No-voltage make contact input, open voltage: 24V DC, short-circuit: under 10mA, M3 screw terminal |
Control Output |
Power remote: Open collector output, withstand voltage: 35V DC, control current: under 50mA, M3 screw terminal |
Indicator |
5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED, TEL LED |
Priority |
EMERGENCY: Overrides other inputs TEL: Overrides other inputs except "EMERGENCY”, ON/OFF selectable with switch setting MIC 1: Overrides other inputs except "EMERGENCY & TEL”, ON/OFF selectable with switch setting |
Operating Temperature |
-10ºC - +40ºC |
Finish |
Panel: ABS resin, black, hair line Case: Steel plate, black |
Dimensions |
420 (W) x 107.7 (H) x 367 (D)mm |
Weight |
12.6kg |
Accessory |
Power cord x 1, Terminal block cover x 1, Terminal block cover mounting screw x 2 |
Option |
Rack mounting bracket: MB-25B, Volume control cover: YA-920, Input transformer: IT-453A |
Note* |
(*1) 0dB = 1V (*2) Can be transformer-balanced with the addition of optional IT-453A input transformer. (*3) LINE 1 and LINE 2 outputs can be interlocked with ZONE 1 and ZONE 2 speaker selectors, respectively. (This function needs internal modification.) (*4)Operation when activated can be selected from the following: Turning ON the unit\'s power (factory-preset) or OFF. (The OFF function needs internal modification.) |
|
High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.
Specification |
| Power Source | 220 - 240V AC or 24V DC | Rated Output | 240W | Power Consumption | 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output) | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | Distortion | Under 1% at 1kHz,1/3 rated power | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:42W (100V)
LOW IMPEDANCE: 4Ω (31V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | Phnatom Powe | DC + 21V (MIC 1) | S/N Ratio | Over 60dB | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | Indicator | Power signal, peak | Finish | Panel: ABS resin, black/Case: Steel plate, black | Dimensions | 420 (W) x 100.9 (H) x 360.3 (D) mm | Weight | 13kg |
|
The Crown 135MA is a high value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 135MA provides 3 inputs (each with a volume control) and a 35W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
Features
- 3 inputs (each with a volume control), and one 35W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications
- Minimum Guaranteed Power into 8 ohms or 70V/100V Output: 35W
- Frequency Response (at 1 watt from line out): 50Hz to 20kHz +/-1dB; 19Hz to 34kHz +0, -3dB
- Signal to Noise Ratio (ref. to rated power, master volume at minimum):
Mic: > 58 dB.
Line: > 60 dB.
Telephone: > 60 dB.
Inputs 2 or 3 (and 4 in 160MA): > 78 dB - THD+N:
|
The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
FEATURES
- 4 inputs (each with a volume control), and one 60W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable
- Warranty completely protects your investment and guarantees its specifications
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier. |
Reviews
There are no reviews yet.