Content |
The Denon Professional DN-350MP will interface to any sound system via balanced or unbalanced outputs, and play audio files from the USB port (flash drive or HDD), 3.5mm stereo AUX input, or from a Bluetooth device. This 1RU player also features a smartphone shelf to hold your device while it is paired via Bluetooth and charging from the USB charging port conveniently located on the front panel. Up to (8) Bluetooth devices can be stored in the player\'s memory. There is also an on-board 60W mono amplifier for connection to 4-ohm, 70V and 100V speaker systems with the outputs on a Euroblock connector. And, for convenience, the amplifier has a level control and ON/OFF switch located on the rear of the unit. An included remote Bluetooth antenna attaches to the rear of the DN-350MP via a BNC jack. The DN-350MP is perfect for retail spaces, sports bars, and house-of-worship applications.
- Plays files from Bluetooth, USB and 3.5mm inputs
- Smartphone shelf and USB charging port
- Balanced XLR and unbalanced RCA outputs
- 60W mono amplifier with level control and ON/OFF switch
- Supports 4-ohm, 70V and 100V speaker systems
- BNC antenna input for Denon remote Bluetooth antenna
-
Audio Specification
-
XLR Audio Output
- Frequency Response: 10 - 20,000 Hz ±1.0dB
- Signal-to-Noise Ratio: > 95dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: +4dBu ±0.2dBu (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.01% (10 - 20,000 Hz)
- THD + Noise: < 0.025% (10 - 20,000 Hz)
- Max Noise Level: < 20 uVrms (10 - 20,000 Hz)
-
RCA Audio Output
- Frequency Response: 10 - 20,000 Hz within ±1.0dB
- Signal-to-Noise Ratio: > 100dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: -10dBv ±0.2dBv (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.02% (10 - 20,000 Hz)
- THD + Noise: < 0.06% (10 - 20,000 Hz)
- Max Noise Level: < 2 uVrms (10 - 20,000 Hz)
-
Amplified Audio Output
- Max Power Output: 60W MONO (10 - 20,000Hz)
- Frequency Response: 10 - 20,000Hz within ±1.0dB
- Outputs Available: 4Ω direct / 70V or 100V
- Dynamic Range: > 85dB (10 - 20,000 Hz, A-weighted)
- Signal to Noise: > 85dB (1 kHz, 0dB, A-weighted)
- THD @ 1W: < 0.01% (10 - 20,000Hz)
- THD @ 60W: < 0.5% (10 - 20,000Hz)
- Max Noise Level: < 275 uVrms (10 - 20,000Hz)
-
Audio File / Signal
- File Format: WAV / MP3 / AIFF / WMA
-
Sampling Rate
- WAV/WMA: 44.1kHz / 48kHz
- MP3/M4A: 44.1kHz
-
Bit Rate
- WMA: up to 192 kbps
- WAV: 16-bit depth
- MP3/M4A: up to 320 kbps
- ID3 Tag: MP3 V1.x - 2.4
-
USB Storage Device
- File System: FAT 16/32
- Media Type: Flash, HDD
-
General
-
Power Requirement
- Input voltage: 100 - 240V, 50/60 Hz
- Connection: IEC cable
- Power Consumption (Idle Mode): < 5W
- Power Consumption (Max): 120 W
- Operating Temperature: 5°C - 45°C (41°F - 113°F)
- Operating Humidity: 25 - 85% (non-condensing)
- Dimensions: 19.00“W x 13.66“D x 1.73“H (483 x 347 x 44mm) with rack ears attached
- Weight: 9.0 lbs (4.1kg)
|
| - SPEAKER SELECT(5ZONE SPEAKER OUTPUT) Six speaker select switches enable you to select any combination of up to five speakers. - SELECTABLE PRIORITY MUTING Switchable audio signal priority for MIC Channels 1, siren, Chime and Telephone input over other input sources. - MONITOR SPEAKER You can monitor output signal by using the monitor speaker, and can control the monitor level on front panel by 3 step lever switch. - ANNOUNCEMENT CHIME Convenient four-tone chime for use with announcements. - REMOTE CONTROL INPUT Individual speaker zones can be selected and chime can be operated by wired remote control. - EM(EMERGENCY) When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted. - REMOTE POWER You can turn on/off amplifier by remote control. - INDIVIDUAL INPUT GAIN CONTROLS Rear-panel gain controls for each input channel for total control of individual levels. - MODULAR DESIGN Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-510/520ʼs audio capabilities. ACCESSORIES One detachable AC power cord is provided for use with this product. | | | | | | PAM-510 | PAM-520 | Amplifier Section (Amp In@1kHz, 4Ω Load Output) | Rated Output Power (THD 1%) | 120W(RMS) | 240W(RMS) | Speaker Zone 1~5 Output | 25W MAX | 50W MAX | Input Sensitivity/Impedance | 1V/20kΩ | S/N | Better than 85dB | Frequency Response (at 1kHz Half Power Output, ±3dB) | 80Hz~18kHz | Mic Input Section (Mic 1~4 In@1kHz, Preamp Out) | Input Sensitivity/Impedance | –60dBV/600Ω | S/N | Better than 55dB | Frequency Response (±3dB) | 120Hz~10kHz | Tone Control (Bass:100Hz,Treble:10kHz) | ±12dB | Phantom Power | +24VDC | Line Input Section (Line 1~2 In@1kHz, Preamp Out) | Input Sensitivity/Impedance | –30dBV/10kΩ | S/N | Better than 65dB | Frequency Response (±3dB) | 80Hz~15kHz | Tone Control (Bass:100Hz,Treble:10kHz) | ±12dB | Remote Amp Section (Remote In@1kHz, Preamp Out) | Mic Input Sensitivity/Impedance | –60dBV/600Ω | S/N | Better than 55dB | Frequency Response (±3dB) | 120Hz~10kHz | Tel In Section (Tel In@1kHz, Preamp Out) | Input Sensitivity/Impedance | 0.3V/600Ω(USA/Canada) | 0.775V/600Ω(EC & Associated) | S/N | Better than 65dB | Frequency Response (±3dB) | 330Hz~3kHz | Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In) | 0dBV/600Ω | | T.H.D | Less than 0.5% | Record Out | –10dBV/3kΩ | Operating Temperature | –10°C~40°C | Power Source | 100–120VAC or 220–240VAC; 50/60Hz, 24VDC | Power Consumption (1/8 POWER) | 180W | 320W | Weight | 17kg/37.6lb | 19kg/42lb | Dimensions | 482(W) x 132(H) x 398(D)mm 19(W) x 5.2(H) x 15.7(D)in | ※ Specifications and design subject to change without notice. | | | |
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier. |
- Easy installation in practically any 12V battery equipped car.
- Compact, rugged construction and front panel controls.
- Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
- Unidirectional dynamic microphone with talk switch.
Specification |
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | Power Consumption | 4.4A or less at rated power output. | Output Power | Rated 30W, max. 60W | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | Distortion | Less than 5% (at 1kHz rated output) | Frequency | Response 100 ~ 10,000Hz | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | Dimensions | (W x H x D): 178 x 50 x 144mm (mounting device excluded) | Weight | 1.1 kg | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (8A) ... 1
Connection cord ... 1 set | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
- Easy installation in practically any 12V battery equipped car.
- Compact, rugged construction and front panel controls.
- Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
- Unidirectional dynamic microphone with talk switch.
Specification |
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | Power Consumption | 9A or less at rated power output. | Output Power | Rated 60W, max. 120W | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | Distortion | Less than 5% (at 1kHz rated output) | Frequency Response | 100 ~ 10,000Hz | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | Dimensions | (W x H x D): 178 x 50 x 170mm (mounting device excluded) | Weight | 1.2 kg | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (12A) ... 1
Connection cord ... 1 set | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
Specifications Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
| Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) |
100 dB
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors
| AC Line Current |
CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
| Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
| Load impedance (note: safe with all types of loads)
Dual
Bridge mono |
2–8 ohms
4–16 ohms
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
| Sensitivity (at 8 ohm rated output) |
1.4V
| Maximum Input Signal |
+22 dBu typical
| Operating Temperature |
0° C to 40° C at 95% relative humidity (non-condensing)
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V-240V, 50/60 Hz
| Ventilation |
Flow-through ventilation from front to back
| Cooling |
Heat sinks and proportional-speed fan
| Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
| Net Weight, Shipping Weight |
19 lb (8.6kg), 22 lb (10.0 kg)
| |
Reviews
There are no reviews yet.