Content |
The Denon Professional DN-350MP will interface to any sound system via balanced or unbalanced outputs, and play audio files from the USB port (flash drive or HDD), 3.5mm stereo AUX input, or from a Bluetooth device. This 1RU player also features a smartphone shelf to hold your device while it is paired via Bluetooth and charging from the USB charging port conveniently located on the front panel. Up to (8) Bluetooth devices can be stored in the player\'s memory. There is also an on-board 60W mono amplifier for connection to 4-ohm, 70V and 100V speaker systems with the outputs on a Euroblock connector. And, for convenience, the amplifier has a level control and ON/OFF switch located on the rear of the unit. An included remote Bluetooth antenna attaches to the rear of the DN-350MP via a BNC jack. The DN-350MP is perfect for retail spaces, sports bars, and house-of-worship applications.
- Plays files from Bluetooth, USB and 3.5mm inputs
- Smartphone shelf and USB charging port
- Balanced XLR and unbalanced RCA outputs
- 60W mono amplifier with level control and ON/OFF switch
- Supports 4-ohm, 70V and 100V speaker systems
- BNC antenna input for Denon remote Bluetooth antenna
-
Audio Specification
-
XLR Audio Output
- Frequency Response: 10 - 20,000 Hz ±1.0dB
- Signal-to-Noise Ratio: > 95dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: +4dBu ±0.2dBu (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.01% (10 - 20,000 Hz)
- THD + Noise: < 0.025% (10 - 20,000 Hz)
- Max Noise Level: < 20 uVrms (10 - 20,000 Hz)
-
RCA Audio Output
- Frequency Response: 10 - 20,000 Hz within ±1.0dB
- Signal-to-Noise Ratio: > 100dB (1 kHz, 0dB, A-weighted)
- Dynamic Range: > 90dB (10 - 20,000 Hz, A-weighted)
- Max Voltage Output: -10dBv ±0.2dBv (10 - 20,000 Hz)
- Channel Separation: > 80dB (1 kHz, 0dB, A-weighted)
- THD: < 0.02% (10 - 20,000 Hz)
- THD + Noise: < 0.06% (10 - 20,000 Hz)
- Max Noise Level: < 2 uVrms (10 - 20,000 Hz)
-
Amplified Audio Output
- Max Power Output: 60W MONO (10 - 20,000Hz)
- Frequency Response: 10 - 20,000Hz within ±1.0dB
- Outputs Available: 4Ω direct / 70V or 100V
- Dynamic Range: > 85dB (10 - 20,000 Hz, A-weighted)
- Signal to Noise: > 85dB (1 kHz, 0dB, A-weighted)
- THD @ 1W: < 0.01% (10 - 20,000Hz)
- THD @ 60W: < 0.5% (10 - 20,000Hz)
- Max Noise Level: < 275 uVrms (10 - 20,000Hz)
-
Audio File / Signal
- File Format: WAV / MP3 / AIFF / WMA
-
Sampling Rate
- WAV/WMA: 44.1kHz / 48kHz
- MP3/M4A: 44.1kHz
-
Bit Rate
- WMA: up to 192 kbps
- WAV: 16-bit depth
- MP3/M4A: up to 320 kbps
- ID3 Tag: MP3 V1.x - 2.4
-
USB Storage Device
- File System: FAT 16/32
- Media Type: Flash, HDD
-
General
-
Power Requirement
- Input voltage: 100 - 240V, 50/60 Hz
- Connection: IEC cable
- Power Consumption (Idle Mode): < 5W
- Power Consumption (Max): 120 W
- Operating Temperature: 5°C - 45°C (41°F - 113°F)
- Operating Humidity: 25 - 85% (non-condensing)
- Dimensions: 19.00“W x 13.66“D x 1.73“H (483 x 347 x 44mm) with rack ears attached
- Weight: 9.0 lbs (4.1kg)
|
High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.
Specification |
| Power Source | 220 - 240V AC or 24V DC | Rated Output | 30W | Power Consumption | 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output) | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | Distortion | Under 1% at 1kHz,1/3 rated power | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | Phnatom Powe | DC + 21V (MIC 1) | S/N Ratio | Over 60dB | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | Indicator | Power signal, peak | Finish | Panel: ABS resin, black/Case: Steel plate, black | Dimensions | 420 (W) x 100.9 (H) x 280.2 (D) mm | Weight | 5kg |
| - Easy installation in practically any 12V battery equipped car.
- Compact, rugged construction and front panel controls.
- Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
- Unidirectional dynamic microphone with talk switch.
Specification |
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | Power Consumption | 2.2A or less at rated power output. | Output Power | Rated 15W, max. 35W | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | Distortion | Less than 5% (at 1kHz rated output) | Frequency Response | 100 ~ 10,000Hz | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | Dimensions | (W x H x D): 178 x 50 x 132mm (mounting device excluded) | Weight | 900g | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (4A) ... 1
Connection cord ... 1 set | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.
FEATURES
- 4 inputs (each with a volume control), and one 60W amplifier output channel
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable
- Warranty completely protects your investment and guarantees its specifications
|
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 200: 2x 100 W / 100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 15 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier. |
Reviews
There are no reviews yet.