| Content |
Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.
The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.
Digidesign Pro Tools Custom Keyboard WIN Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Windows - PS-2 connection cord and USB adapter for easy connection with either method
|
The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C's 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.
* 0 dB = 0.775 V | Power Source | 220 - 240 V AC | | Power Consumption | 18 W | | Volume Adjustment | 100 mm motorized fader x 12
Rotary encoder x 8 | | Line Input | 1 channel (stereo) | | Headphone Output | Stereo 100 mW + 100 mW (32 Ω load) | | Monitor Bus | 1 stereo input
Connector: RJ45 connector
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable (2 pairs of data lines)
Maximum cable distance: 100 m (109.36 yd) (between D-2012C and D-2008SP) | | LAN | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
RJ45 connector
Network protocol: TCP/IP
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable
Maximum cable distance: 100 m (109.36 yd) (between D-2008SP and switching hub) | | Control | RS-232C: D-sub connector (9 pins) for maintenance use | | Finish | Panel: Surface-treated steel plate
Rack mounting bracket: Surface-treated steel plate | | Dimensions | 482 (W) × 266 (H) × 138 (D) mm (18.98 × 10.47" × 5.43) | | Weight | 6.6 kg (14.55 lb) | | Accessory | Power cord (2 m (6.5 ft)) ……1
Fader knob (yellow) ……3 | | Option | Console case: D-2012AS |
| Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features - Support for PAL, NTSC and 60 Hz B&W standards
- One composite video input and three composite video outputs
- Can operate as a master black-burst generator
- Can operate as genlocking slave device
|
For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time.
|
Specifications | General | | Recording media | | CompactFlash (CF) card | | File system | | FAT32 | | Recording format | | BWF (Monophonic, Polyphonic) | | Number of channels | | 8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz) | | Quantization bit rate | | 16/24 bit | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | Reference clock | | Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN) | | Type of timecode frame | | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF | | Limiter | | Attack time: 3 ms
Release time: 300 ms
Threshold: –5 dBFS
Ratio: 32:1 | | Analogue audio inputs and outputs | | The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack. | | ANALOG INPUT (1-8) | | D-sub 25-pin | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG INPUT (L/A, R/B) | | XLR-3-31 (1: GND, 2: HOT, 3: COLD) | | Input impedance | | 10 kOhm | | Nominal input level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (1-8) | | D-sub, 25-pin | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | ANALOG OUTPUT (A/B) | | XLR-3-32 (1: GND, 2: HOT, 3: COLD) | | Output impedance | | 100 Ohm | | Nominal output level | | When reference level is –9 dB:
+6 dBu (1.55 Vrms)
When reference level is not –9 dB:
+4 dBu (1.23 Vrms) | | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | | PHONES connector | | 6.3-mm standard stereo jack | | Maximum output power | | 45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm) | | Digital audio inputs and outputs | | DIGITAL IN/OUT (AES/EBU) | | D-sub, 25-pin | | Minimum input voltage | | 2 Vpp | | Maximum input voltage | | 7 Vpp | | Output voltage | | 2–5 Vpp | | Format | | AES3-2003/IEC 60958-4 (AES/EBU) | | DIGITAL I/O (ADAT) | | ADAT optical | | Format | | ADAT | | DIGITAL INPUT A-B | | XLR-3-31 | | Input voltage | | 2–7 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | DIGITAL OUTPUT L-R | | XLR-3-32 | | Output voltage | | 2–5 Vpp at 110 Ohm | | Format | | AES3-2003 (AES/EBU) | | Other inputs and outputs | | RS-422 | | D-sub, 9-pin | | RS-232C | | D-sub, 9-pin | | PARALLEL | | D-sub, 25-pin | | CASCADE IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | CASCADE OUT | | BNC | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | TIME CODE IN | | BNC | | Input voltage | | 0.5–5 Vpp | | Input impedance | | 20 kOhm | | TIME CODE OUT | | BNC | | Output voltage | | 2–5 Vpp | | Output impedance | | 600 Ohm ±10 | | WORD/VIDEO IN | | BNC | | Input voltage | | TTL equivalent (5 V) | | Input impedance | | 75 Ohm ±10 %
Allowable frequency deviation of external synchronization: ± 100 ppm | | WORD/VIDEO THRU/OUT | | BNC
OUT/THRU switch included (OUT is for WORD OUT only) | | Output voltage | | TTL equivalent (5 V) | | Output impedance | | 75 Ohm ±10 % | | Sampling frequency (when using WORD) | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | | ETHERNET | | RJ45 | | Keyboard | | Mini-DIN (PS/2) | | USB | | USB A-type, 4-pin | | Protocol | | USB2.0 HIGH SPEED (480 Mbit/s) | | Audio performance (analogue input to analogue outp | | Frequency response | | | | 20 Hz - 20 kHz | | ±0,5 dB (all sampling rates) | | at 40 kHz | | +0,5 dB/–2 dB (Fs = 88.2/96 kHz) | | at 80 kHz | | +0,5 dB/–5 dB (Fs = 176.4/192 kHz) | | Distortion | | ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF) | | S/N ratio | | ≥100 dB(A) (22 kHz LPF) | | Power requirements and other specifications | | Power requirements | | 100–240 V AC, 50–60 Hz | | Power consumption | | 26 W | | Dimensions (W x H x D) | | 483 mm x 88 mm x 288 mm | | Weight | | 4.8 kg | | Operating temperature range | | 5–35 °C |
|
Reviews
There are no reviews yet.