DIGITAL SOUND 8928 Sound dB meter

93.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret […]

 

Read more

Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery.

A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.

  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “DIGITAL SOUND 8928 Sound dB meter”

Your email address will not be published. Required fields are marked *

Quick Comparison

DIGITAL SOUND 8928 Sound dB meter removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removePALMER AUDIO AHMCT8 AUDIO CABLE TESTER removeARTLIGHT ZK-YK1028 Non Contact Infrared Thermometer removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter remove
NameDIGITAL SOUND 8928 Sound dB meter removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removePALMER AUDIO AHMCT8 AUDIO CABLE TESTER removeARTLIGHT ZK-YK1028 Non Contact Infrared Thermometer removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter remove
Imagezk yk1028 non contact infrared thermometer
SKU8928PAN05AHMCT8ZK_YK1028AHMCTDMXE010254
Rating
Price93.00 incl. GR VAT 52.07 incl. GR VAT 44.42 incl. GR VAT 11.77 incl. GR VAT 29.08 incl. GR VAT 85.00 incl. GR VAT
Stock

In stock

In stock

Only 1 left in stock (can be backordered)

Only 1 left in stock

Only 1 left in stock (can be backordered)

Only 2 left in stock (can be backordered)

AvailabilityIn stockIn stockOnly 1 left in stock (can be backordered)Only 1 left in stockOnly 1 left in stock (can be backordered)Only 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentDigital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through“, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics. SPECIFICATIONS:
  • Input: 2 x XLR/f balanced
  • Nominal impedance: 200 Ω
  • Output 1 x XLR/m balanced
  • Load impedance >200 Ω
  • Symmetrically decoupled through resistors
  • Total ohmic value: 200 ohms
  • Typical attenuation: 6 dB
  • Housing: metal casing 110 x 73 x 42 mm
pdfUser's Manual   A stage is only as good as its cables — and the AHMCT 8 sets the record straight. The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage. The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands. The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.
  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer
Product type Test Equipment
Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR
Controls down , Power On/Off , up , volume
Indicators battery status , LED chain
Operating voltage 9 V block
Acoustic continuity test yes
Test cable yes
Cabinet material sheet steel
Cabinet surface powder coated
Width 105 mm
Depth 145 mm
Weight 0,64 kg
Overview: This is an infrared digital forehead thermometer with high precision, which is hand-held and portable for easy use. Non-contact design reduces cross infection effectively, widely used for measuring body temperature. Features: High precision infrared sensor, stable and reliable, for safe use, ensures accurate measuring, small error. Alarm temperature can be set and once exceeded, it will give out a beep sound. Also, it supports the Mute mode. Humanized design, LCD screen display with high brightness backlight can clearly show the body temperature. Aim at the forehead (3-5cm), press the measuring button, and the LCD display will show the currently measured temperature. Automatic store 32 sets of measurement data, you can view the data of the previous measurement. Short press the Function Setting button to switch between Body and Object temperature modes. Compact design, lightweight and portable, comfortable grip handle, easy to carry, convenient to use. Suitable for baby, kids, and adult use and can be widely used in school, office, and at home, etc. Note: The battery is not included. Specification: Model: ZK-YK1028 Measuring Method: Non-Contact Measuring Distance: 3cm-5cm Unit of Measurement: Celsius(℃), Fahrenheit(°F) Measuring Range: 32℃-42.9℃ (89.6°F-109.2°F) Max. Allowable Error: ±0.3℃ within range 35℃-42℃ Display Resolution: 0.1℃/0.1°F Operating Environment: 16℃-35℃ (60.8°F-95°F), Humidity≤85% Transportation Storage Environment: -20℃-50℃ (-4°F-131°F), Humidity ≤90% Power: DC 3V (2 AAA Batteries Not Included) Backlight: Highlight Backlight Automatic Shut-down: 30s Item Size: 15.0 * 8.5 * 4.3cm / 5.90 * 3.34 * 1.69in Item Weight: 105g / 3.70oz Package Size: 17.0 * 10.5 * 4.8cm / 6.69 * 4.13 * 1.89in Package Weight: 156g / 5.50oz Package List: 1 * Thermometer 1 * User Manual (English)

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

 

  • Tests 3-pin and 5-pin DMX cables for continuity
  • Also tests 3-pin XLR microphone cables
  • Automatic test mode or manual pin 1 - 5 selection
  • LED indicators
  • Mounting brackets included

 

Product type Test Equipment
Connectors XLR (3-pin) , XLR (5-pin)
Controls Auto Scan , On / Off , Scan switch
Indicators LED chain
Operating voltage 2 x AA battery
Acoustic continuity test no
Test cable no
Cabinet material sheet steel
Cabinet surface powder coated
Width 240.2 mm
Height 48 mm
Depth 53 mm
Weight 0,7 kg

 

Details The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer. Specifications • Designed to set in an amp rack to view your decibel level • Creates a great light show in your amp rack • Display progresses from green through amber to red • Sensitivity adjustment on both left and right channels • 2 separate modes: dot and bar • Includes 5V power supply • Line Inputs: Left & Right RCA / Left & Right XLR • Line Outputs: Left & Right RCA / Left & Right XLR • Voltage Operation: DC 5V, 500mA Power Supply included • Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm • Weight: 2.5 lbs. / 1.25kg.
Weight0.50 kg0.26 kg0.60 kg0.6 kg0.80 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.26 kg
Weight 0.60 kg
Weight 0.6 kg
Weight 0.80 kg
Weight 1.50 kg