DBX DJDI 2-channel Passive Direct Box

52.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of […]

 

Read more

The 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of signal levels and its passive design means clean, quiet and uncolored operation with no power required.

Features

  • Dual Channel
  • (2) 1/4” 50k Ohm TS Inputs
  • (2) XLR Transformer-Isolated 600 Ohm Input/Outputs
  • Passive Circuit Design
  • Continuously Variable Input Attenuator
  • Ground Lift Switch

Specifications

Circuit Passive
Inputs 2
Input Connectors 1/4” TS (Tip Hot, Sleeve Ground)
Input Type Unbalanced, RF Filtered
Input Impedance 50 kOhm
Outputs 2
Output Connectors Male XLR, Balanced, Pin 2 hot
Output Impedance 600 Ohms
Noise Level -104dBu (22Hz -22kHz, Input Shorted)
THD+N (10Hz-22kHz) 0.23% typical @ +4dBu @ 1kHz
Insertion Loss 21dB typical
Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “DBX DJDI 2-channel Passive Direct Box”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX DJDI 2-channel Passive Direct Box removeOMNITRONIC LH-053 PASSIVE DI BOX removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeALPHATON SM-60 ACTIVE D.I BOX remove
NameDBX DJDI 2-channel Passive Direct Box removeOMNITRONIC LH-053 PASSIVE DI BOX removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeALPHATON SM-60 ACTIVE D.I BOX remove
Image10355053 lh 053 di box balance unbalance
SKUDBX DJDILH-053PAN03E005867DI-PLUS 2SM-60
Rating
Price 52.00 incl. GR VAT 22.94 incl. GR VAT 292.43 incl. GR VAT 33.00 incl. GR VAT 203.11 incl. GR VAT 113.09 incl. GR VAT
Stock

Available on backorder

In stock (can be backordered)

Available on backorder

In stock

In stock

In stock

AvailabilityAvailable on backorderIn stock (can be backordered)Available on backorderIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing
ContentThe 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of signal levels and its passive design means clean, quiet and uncolored operation with no power required. Features
  • Dual Channel
  • (2) 1/4” 50k Ohm TS Inputs
  • (2) XLR Transformer-Isolated 600 Ohm Input/Outputs
  • Passive Circuit Design
  • Continuously Variable Input Attenuator
  • Ground Lift Switch
Specifications
Circuit Passive
Inputs 2
Input Connectors 1/4” TS (Tip Hot, Sleeve Ground)
Input Type Unbalanced, RF Filtered
Input Impedance 50 kOhm
Outputs 2
Output Connectors Male XLR, Balanced, Pin 2 hot
Output Impedance 600 Ohms
Noise Level -104dBu (22Hz -22kHz, Input Shorted)
THD+N (10Hz-22kHz) 0.23% typical @ +4dBu @ 1kHz
Insertion Loss 21dB typical
Little brother of the LH-055 DI Box. Sturdy housing, solid workmanship at an unbeatable price. 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal (e.g. to a guitar amplifier) 1 low-impedance output (XLR) Black housing

Passive 1-channel DI box, black

  • 1 high-impedance signal input, 6.3 mm jack
  • 1 low-impedance XLR output
  • 6.35 mm jack input, and output
  • Converts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer
  • Switchable input attenuation: 0 dB, -20 dB, -40 dB
  • Rugged black metal housing

Package contents

  • 1 x device, 1 x user manual
Frequency range: 15 - 30000 Hz
S/N ratio: >95 dB
Impedance: Input: 50 kOhm Output: 600 Ohm
Input attenuation: 0 dB, -20 dB, -40 dB; switchable
Control elements: Groundlift selector
Connections: Input: 1 x 6.3 mm plug (unbal.) Link: 1 x 6.3 mm plug (unbal.) Output: line via 1 x 3-pin XLR
Dimensions: Width: 12,7 cm Depth: 7,4 cm Height: 4,5 cm
Weight: 440 g
 

Palmer PAN 03
19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Product type DI Boxes
Type active
Channels 4
Inputs 4
Input connectors 6.3 mm jack
Max. input level + 45 dBu
Input impedance (@ 60 Hz) 1 M Ohm(s)
Input pad 0 / -30 dB
Outputs 4 (+ 4 parallel XLR outs)
THRU outputs/channel 1
Output connectors 6.3 mm jack , XLR
Max. output level + 10 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 20000 Hz
Transformer balanced Yes
Ratio 10 : 1
Indicators Power
Controls attenuator , ground lift
Operating voltage external
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 "
Depth 90 mm
Height 45 mm
Height 1 U
Weight 1,6 kg
Behringer DI-400P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage.

Phantom or battery powered in a rugged steel chassis
 
The ARX DI-PLUS 2 represents another major step forward in active direct boxes. Packaged in
a single channel stand-alone format, the DI-PLUS 2 represents a fresh look at active stereo
D.I. concepts.

Precision engineered
Ultra quiet, ultra clean circuitry delivers maximum headroom whatever the signal. Premium grade
components, plus an all-steel chassis gives excellent hum and noise specifications and superb
audio quality in a tough, roadworthy package. Accurate Left and Right channel level matching keeps
the stereo image centred.

Level control
The DI-PLUS 2 features two high impedance unbalanced inputs on the front panel, running to balanced
XLR outputs on the rear. A a global Pad switch drops inputs by 20dB, making it suitable for all applications
from the softest keyboard to the hottest broadcast levels.
 
Battery compartment
The revolutionary simple 'clamshell' action of the DI-PLUS 2 battery compartment makes battery changing
extremely easy, even on the darkest stages.
A 9v alkaline battery snaps into a PCB mounted battery holder for fast, secure location. No fragile battery clip
leads to break, no tools required, no screws to lose. Production crew heaven!
 
Automatic Phantom switching
The DI-PLUS 2 will automatically switch itself to the console's own Phantom Power, if available, and an LED
will indicate this mode. Turn the Phantom Power off and it will instantly revert back to battery mode.

Rugged all-steel case
A lot of direct boxes are fitted into brittle cast alloy cases. Not this one! The tough all-steel inner and outer
chassis of the DI-PLUS 2 provide excellent RF/EMF shielding while making it a sturdy, heavy duty unit that
is hard to dislodge, and hard to leave behind.
 
Rear panel showing Left and Right XLR connectors, ground lift switch, battery check switch and LED, plus
phantom power On LED and captive screw for opening up the unit for battery changing
 
Whether you're a Studio or Live Sound engineer, installation contractor, or broadcast engineer, you want all
the dynamics,clarity and stereo information of the original sound source transferred to the mixing console.
The ARX DI-PLUS 2 provides a rugged, no-compromise solution to all stereo direct injection and signal
balancing requirements.
 
T E C H N I C A L S P E C I F I C A T I O N S:
Max Input Level
+12 dB Phantom powered
+6 dB Battery powered
Input Impedance 1 Meg Ohm
Max Output Level
+17 dB 10K Ohm load Phantom powered
+12 dB 10K Ohm load Battery powered
+11 dB 600 Ohm load Phantom powered
+12 dB 600 Ohm load Battery powered
Output Impedance 680 Ohms Balanced
Output Signal to Noise
-100 dB unweighted
-104 dB A weighted
Dynamic Range
117 dB 10K Ohm load Phantom powered
112 dB 10K Ohm load Battery powered
111 dB 600 Ohm load Phantom powered
107.5 dB 600 Ohm load Battery powered
Distortion 100 Hz .0018%, 1KHz .0028%, 10KHz .0056%
Frequency Response 20Hz to 20KHz, ± 0.2 dB
Gain through Unit: 6dB (Pad switch out)
Pad Switch: Global -20 dB attenuation
Input and Loop Out Connectors
Insulated jacks (!!!Note that Channel A Input connector switches the unit on
when a plug is inserted. Remove plug when storing to avoid battery drain!!!)
Output Connectors
3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
Global Audio Ground (Pin 1) lift switch
Construction
All-steel chassis, fibreglass PCB
Battery Access
Twist connector opens chassis, snap-in battery holder inside.
No tools required

Active DI-Box SM-60

The electronic Direct-Injection Box SM-60 allows direct connection of electronic
music instruments such as keyboards, synthesizers, electric and electronic pianos,
etc. with mixing consoles in PA-systems and in recording studios.
The SM-6 is designed for applications, where a passive DI-Box does not perfom
satisfactorily, i.e., where the output level of a passive DI-Box is too low for the microphone
input section of the mixing desk.
Because the input impedance of the SM-6 is above 5 MOhm, instrument outputs are
not loaded or in any other way adversely affected. The voltage ratio from input to output
is 1: 1 and is always sufficient for connection with any microphone input. Input connectors
are 1/4" phone jacks, output connector is a Switchcraft D3M; output is 600 Ohms,
transformer balanced. The output level may in certain cases overload microphone inputs -
the line input section of the mixing console must then be used for connecting the SM-6.
The unit operates with a 9 V battery or phantom powering from 24 to 48 volts.

Technical Data

input impedance > 5 MOhm
max. input impedance + 6 dBu, 1,55V
ouptut impedance 600 Ohm
frequency response 20 ... 20000 Hz, ± 0,2 dB
gain 1 : 1
THD < 1 % at 30 Hz
       < 0,7 % bei 40 Hz
powering  9-V battery (IEC 6LF22) or
                 phantom power 24 ... 48 V.
inputs  two 1/4" phone jacks , unbalanced
          (one being used as output to instruments amp)
outputs  XLR, balanced
             pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 240 g
dimensions 113 x 71 x 37 mm

Weight0.30 kg0.70 kg1.90 kg0.20 kg0.60 kg0.24 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.70 kg
Weight 1.90 kg
Weight 0.20 kg
Weight 0.60 kg
Weight 0.24 kg