RCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER

1,562.40 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space. Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg. It […]

 

Read more

DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space.

Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg.
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω: 2 x 1700 Watt rms  
Power output stereo 4Ω: 2 x 1200 Watt rms  
Power output stereo 8Ω: 2 x 800 Watt rms  
Power output bridged 4Ω: 3400 Watt rms  
Power output bridged 8Ω: 2400 Watt rms  
Frequency Response: 20 Hz ÷ 20 kHz  
Signal/noise rate: 108 dB  
Damping factor: > 1000  
Slew rate: 55 V/μS  
INPUT SECTION
Input connector: xlr  
Input sensitivity: 1.4 dBm/V RMS  
OUTPUT SECTION
Output connector: Speakon  
SYSTEM PARAMETERS
Cooling: Temperature-controlled fan  
Protections: Temp., DC, RFI, short-circuit  
Voltage gain: 32 – 26 dB  
Amplifier class: HD  
POWER REQUIREMENT
Operating voltage: 90 ÷ 245 V (50 / 60 Hz) V ~ Hz  
Power Consumption: SMPS W  
Power factor (cos φ): 0.95 from 200 W to full power  
PHYSICAL SPECIFICATIONS
Height: 88/3.4 mm/inch  
Width: 482/18,9 mm/inch  
Depth: 420/16.5 mm/inch  
Net Weight: 14/30.8 Kg/Lbs

 

Weight 16.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER removeYAMAHA PC-6501N Power Amplifier 2x750W removeELECTRO VOICE TG5 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 1450 W removeELECTRO VOICE CP3000S Compact Precision Series Class-H Power Amplifier 2X1100 WATT removeQSC RMX4050a Power Amplifier 2x1400W removeDYNACORD H-2500 Power Amplifier 1950 Watts remove
NameRCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER removeYAMAHA PC-6501N Power Amplifier 2x750W removeELECTRO VOICE TG5 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 1450 W removeELECTRO VOICE CP3000S Compact Precision Series Class-H Power Amplifier 2X1100 WATT removeQSC RMX4050a Power Amplifier 2x1400W removeDYNACORD H-2500 Power Amplifier 1950 Watts remove
Image
SKUDPS3000H060.00034001915001736010155E009295
Rating
Price 1,562.40 incl. GR VAT 2,115.00 incl. GR VAT3,640.00 incl. GR VAT1,912.00 incl. GR VAT1,899.00 incl. GR VAT 4,498.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 5 left in stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 5 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space.

Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg.
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 1700 Watt rms 
Power output stereo 4Ω:2 x 1200 Watt rms 
Power output stereo 8Ω:2 x 800 Watt rms 
Power output bridged 4Ω:3400 Watt rms 
Power output bridged 8Ω:2400 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:108 dB 
Damping factor:> 1000 
Slew rate:55 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 dBm/V RMS 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Temperature-controlled fan 
Protections:Temp., DC, RFI, short-circuit 
Voltage gain:32 – 26 dB 
Amplifier class:HD 
POWER REQUIREMENT
Operating voltage:90 ÷ 245 V (50 / 60 Hz) V ~ Hz  
Power Consumption:SMPS W 
Power factor (cos φ):0.95 from 200 W to full power 
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18,9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:14/30.8 Kg/Lbs

 

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N
Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange,
and superbly defined highs. They also deliver fast response and exceptional stability even in the
face of serious power supply limitations. Refinements throughout this expanded five-model lineup
make these amplifiers the new benchmarks for quality, reliability, and versatility in professional
applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 750 Watt / 8Ω RMS,
2 x 1150 Watt / 4Ω RMS, 2300 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

Amplifier Gain    41.5 dB, 35 dB, 32 dB (switchable)
CAN Bus Interface    Optional with RCM-26
Continuous Rated Power
(1 kHz, THD 1%) 2Ω    2000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω    1450 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω    850 Watts
Continuous Rated Power
(20-20 kHz, THD

Electro-Voiceʼs new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EVʼs Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg it is both powerful and lightweight.

 

1U Panel w/ 8 XLRM + 8XLRF 2Amplifier Gain    32 dB
Continuous Rated Power
(1 kHz, THD 1%) 2Ω    1600 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω    1100 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω    600 Watts
Continuous Rated Power
(20-20 kHz, THD

RMXa Series: Professional quality performance, incorporating road-proven QSC designs

  • Compact size — up to 2500 watts in two rack spaces, or 5000 watts in three rack spaces
  • High-current toroidal transformers, for greater 2-ohm power and low noise
  • Independent user-defeatable clip limiters reduce distortion
  • Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
  • The 4000-watt RMX4050a operates on a standard 15 amp plug (120V) 
  • Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performance
  • The RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
  • Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs
  • Touch-proof binding post and Neutrik Speakon® outputs
  • Front mounted gain controls for easy access
  • Signal and clip LED indicators for monitoring performance
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
  • 3-year warranty plus optional 3-year extended service contract

The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)

Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted

Weight16.00 kg12.50 kg14.20 kg8.15 kg20.00 kg14.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 16.00 kg
Weight 12.50 kg
Weight 14.20 kg
Weight 8.15 kg
Weight 20.00 kg
Weight 14.20 kg