DRAWMER DA6 – Balanced Distribution Amplifier

664.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs. The Drawmer DA-6 […]

 

Read more

The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.

The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.

The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.

The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.

Features:

  • 1×6 Stereo Distribution Amp with Monitoring.
  • 1 set of stereo (2) XLR inputs.
  • 6 sets of stereo (2) XLR outputs.
  • Input stage has LED level meter.
  • Each output channel can be switched to mono.
  • Each output channel can be individually monitored.
  • Built-in headphone amp.
  • Optional transformer balanced outputs.
  • Electronically balanced inputs with individual left/right level controls.
  • LED metering on input for balancing stereo material or two mono signals.
  • Left / Right level controls on each output with a stereo / mono switch.
  • Headphone jack to monitor output of selected channel.
  • LED metering on output of selected channel.
  • Auxiliary pair of balanced 1/4″ output jacks for linking multiple DA6 units.
  • 1 unit rack space.
  • Inputs and Outputs are balanced XLRs at +4dBu.
Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “DRAWMER DA6 – Balanced Distribution Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

DRAWMER DA6 - Balanced Distribution Amplifier removeOMNITRONIC ZD-160 MIXER DISTRIBUTOR 1-IN/6-OUT removeDBX 223XS STEREO-2WAY-MONO-3WAY CROSSOVER-XLR only- removeART MX225 5 Zone mixer / distributor 4x line in XLR (2x L/R), 10x XLR Out (5x L/R) removeDBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction removePalmer GA MKII Grand Audition MKII Signal Splitter & Switcher remove
NameDRAWMER DA6 - Balanced Distribution Amplifier removeOMNITRONIC ZD-160 MIXER DISTRIBUTOR 1-IN/6-OUT removeDBX 223XS STEREO-2WAY-MONO-3WAY CROSSOVER-XLR only- removeART MX225 5 Zone mixer / distributor 4x line in XLR (2x L/R), 10x XLR Out (5x L/R) removeDBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction removePalmer GA MKII Grand Audition MKII Signal Splitter & Switcher remove
Imagezd-160-omnitronic zd160 mixer distributor 19inch 1in 6out
SKUUA30810ZD160DBX 223XSMX225DBX 2215PGAMKII
Rating
Price664.00 incl. GR VAT 320.54 incl. GR VAT 199.00 incl. GR VAT 272.80 incl. GR VAT 434.00 incl. GR VATCall for Price
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Call for Price

Description
  • 5 Zone mixer / distributor
  • Adjusts volume of multiple amplifiers or active monitors separately
  • Stereo/mono switch + clip and 5 segment LED on each zone
  • Connectors: 4x line in XLR (2x L/R), 10x XLR Out (5x L/R)
Content

The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.

The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.

The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.

The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.

Features:
  • 1x6 Stereo Distribution Amp with Monitoring.
  • 1 set of stereo (2) XLR inputs.
  • 6 sets of stereo (2) XLR outputs.
  • Input stage has LED level meter.
  • Each output channel can be switched to mono.
  • Each output channel can be individually monitored.
  • Built-in headphone amp.
  • Optional transformer balanced outputs.
  • Electronically balanced inputs with individual left/right level controls.
  • LED metering on input for balancing stereo material or two mono signals.
  • Left / Right level controls on each output with a stereo / mono switch.
  • Headphone jack to monitor output of selected channel.
  • LED metering on output of selected channel.
  • Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
  • 1 unit rack space.
  • Inputs and Outputs are balanced XLRs at +4dBu.

Practical distributor with 1 input and 6 outputs

  • Extends every mixer with additional outputs
  • 1 stereo XLR input
  • 6 stereo zone outputs (XLR)
  • Each zone with level control and mono switch
  • LED display of signal input and mono/stereo mode
  • Rack installation with 1 U
  • (19") 48.3 cm rack installation 1 U
Power supply: 230 V AC, 50 Hz
Power consumption: 7 W
S/N ratio: >69 dB
THD: <0.2 % at 1 kHz
Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Impedance: Input 45.1 kOhm Output 125 Ohm
Gain: 15 dB
Max. level: Output: +22 dB Input: +9 dBV
Color: Silver
Housing design: (19") 48.3 cm rack installation 1 U
Dimension: Width: 48.3 cm Depth: 12.6 cm Height: 4.45 cm
Weight: 2.15 kg
Overview More sound to your amps and speakers The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs Features
  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx® 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
Specifications
Input Connectors XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced >50k ohm, unbalanced >25k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors XLR
Output Type Impedance-balanaced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohms or greater
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response 90 kHz, +0/-3 dB
Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output)
Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)
Dynamic Range > 106 dB, unweighted, any output
THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz
Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch Inverts the phase at the output, one switch per output.
x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch Selects stereo/mono and 2/3-way operation
LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
Operating Temperature 32°F to 113°F (0°C to 45°C)
Power Consumption 15W
Power Connector IEC receptacle
Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight 3.7 lbs. (1.7 kg)
Shipping Weight 5.4 lbs. (2.5 kg)
The MX225 is designed for remote volume control of multiple amplifiers or powered speakers in a distributed audio system. Two stereo sources are available to each of five output zones. Each source input pair handles separate left and right balanced line level signals. Each output zone features independent level control from inputs 1 and 2, stereo/mono selector with mono indicator, LED level metering, and left and right balanced line level zone outputs. All audio connections are balanced XLR. The built in power supply and single high 19″ rack mount format allows for easy installation and reliable operation.
  • 5 Zone mixer / distributor
  • Adjusts volume of multiple amplifiers or active monitors separately
  • Stereo/mono switch + clip and 5 segment LED on each zone
  • Connectors: 4x line in XLR (2x L/R), 10x XLR Out (5x L/R)
  • Dimensions: 482 x 152 x 44.5 mm (19"/1U)
  • Weight: 2.4 kg
Input Connections XLR-F balanced (x4)
Output Connections XLR-M balanced (x10)
Input Impedance 47k Ω
Output Impedance 200 Ω
Total Harmonic Distortion .05% Typical
Signal to Noise Ratio > 90dB typical
Maximum Input Level +20dBu
Maximum Output Level +24dBu balanced
Maximum Gain +6DB
Power Requirements USA – 105 to 125 VAC / 50-60Hz, 15 W typical
Dimensions 1.75″H x 19″W x 7.25.0″D (44.5mm x 483mm x 184mm)
Weight 5.34 lbs (2.42 kg)

DBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction

 It's amazing. One little button. So much effect. dbx? Type III? Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus? Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!

SPECIFICATIONS:

 

 INPUT

Connectors:

 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced 40k ohm, unbalanced 20k ohm

Max Input Level:

>+21dBu balanced or unbalanced

CMRR:

>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors:

 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type:

Impedance-balanaced/unbalanced, RF filtered

Impedance:

Balanced 200 ohm, unbalanced 100 ohm

Max Output Level:

 >+21dBu balanced/unbalanced into 2k or greater
 >+18dBm balanced/unbalanced (into 600)

SYSTEM PERFORMANCE

Bandwidth:

20Hz to 20kHz, +/-0.5dB

Frequency Response:

50kHz, +0.5/-3dB

Noise Reduction In:

 (+/-6 and +/-15dB range):

Signal-to-Noise:

 >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >120dB, unweighted

Noise Reduction Out:

 (+/-6dB range):

Signal-to-Noise:

 >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

Dynamic Range:

 >112dB, unweighted

Noise Reduction Out:

 (+/-15dB range):

Signal-to-Noise:

 >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >108dB, unweighted

THD + Noise:

Palmer GA MKII Grand Audition MKII

  • 24 switchable balanced line outputs
  • Intuitive browser-based control software
  • Individual level control on each output
  • Mono and stereo modes
  • Multiple channel selection
  • High-quality analogue signal path
  • Instant channel switching with no noise or interference
  • XLR line inputs and built-in USB media player
  • Up to three devices cascadable

When tasting wine, it is important that a comparison is as neutral as possible. The same applies to selecting loudspeakers.
To accurately judge sound characteristics, it is essential to listen to different loudspeakers under the same conditions.

Comfortable loudspeaker routing with variable level control for an uncompromising comparison on the sales floor, along with multi-monitor and multi-room applications, are just some of the ways the GrandAudition MK2 can be effectively put to use.

GrandAudition MK2 lets you connect 16 individual loudspeakers or eight loudspeaker pairs and up to eight subwoofers - all with balanced line-level XLR connectors and housed in two 19\" rack units. Depending on how you want to use GrandAudition MK2, the outputs can be selected either individually or as stereo pairs via an intuitive browser-based app or from the unit itself.

Thereby you can choose to just switch between loudspeakers or freely configure any output combination you want, making it not only the ideal solution for a loudspeaker presentation, but also an excellent choice as a central-control-unit for trade fairs, in laboratories and for multi-room sound distribution.

Source material is supplied from a mixer, CD player or digital audio workstation through two balanced XLR inputs - with volume control, of course. But that\'s not all. GrandAudition MK2 is also equipped with a built-in USB media player on which reference titles can be accessed in WAV, AIF, FLAC, MP3 and OGG data formats.

Highlight of GrandAudition MK2

The browser-based remote can be controlled on a tablet or laptop, offering maximum operating convenience. Ethernet and WLAN-capable devices can be used for complete configuration and control of the unit, including channel naming, media player, and other practical functions.

The ability to individually adjust the level for each output and its quick and noiseless switching mechanism, makes it possible to accurately compare loudspeakers and help you reliably guide your customers to select the right loudspeaker. Routing applications that use different levels for each output can also be set up, and a fully analogue signal path with the highest quality is also of course guaranteed with Palmer.

If necessary, you can cascade units to triple the impressive number of 16 channels plus 8 outputs and thus manage even the largest routing scenarios for monitors, such as in presentation areas. You can also use the subwoofer outputs to connect additional loudspeakers without experiencing any technical drawbacks.

In addition to powered loudspeakers, passive loudspeakers can be incorporated with power amps. Signals can also be distributed over multiple line outputs for other applications, for example, by connecting as many as 24 headphone amplifiers to one source signal - an invaluable aid in conference technology and at trade fairs. And to top it all off, GrandAudition MK2 performs remarkably well in measuring laboratories.

In short, GrandAudition MK2, with its clearly arranged features and ease of use, offers comfortable loudspeaker routing with professional sound neutrality.

Product type Switches
Type Analog
Signal processing Analog
Ethernet Functions Yes
Inputs 2 x balanced
Outputs 24 + 2 balanced
Controls Front panel 1 x Encoder pushbutton , 24 x pushbutton
Display elements front side 2 x signal source LED (XLR / Player , Dual-color signal/clip LED , LED ring for main/channel volume with 0dB and mute LED indicator
Front Panel connectores 2 x XLR 3 pin female , 24 x male XLR socket
Controls Element Back Panel mains voltage selector , Power On/Off , reset
Connections rear side 2 x XLR , 2 x XLR 3 pin female , 3-pole IEC mains connection (mains socket) , Micro-USB for service purposes , RJ45 (Ethernet) , USB stick
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Fuse T 630 mA 250V
Power consumption 65 W
Ambient temperature ( in operation ) 0 - 40 °C
Installation Height 19\" / 2 U
Dimensions (W x H x D) 482,6 x 89,4 x 282,3 mm
Housing material Metal
Cabinet surface Powder-coated
Weight 5,7 kg
Weight4.00 kg1.00 kg2.50 kg2.5 kg4.30 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 1.00 kg
Weight 2.50 kg
Weight 2.5 kg
Weight 4.30 kg
Weight 6.00 kg