Content | The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.
The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features: - 1x6 Stereo Distribution Amp with Monitoring.
- 1 set of stereo (2) XLR inputs.
- 6 sets of stereo (2) XLR outputs.
- Input stage has LED level meter.
- Each output channel can be switched to mono.
- Each output channel can be individually monitored.
- Built-in headphone amp.
- Optional transformer balanced outputs.
- Electronically balanced inputs with individual left/right level controls.
- LED metering on input for balancing stereo material or two mono signals.
- Left / Right level controls on each output with a stereo / mono switch.
- Headphone jack to monitor output of selected channel.
- LED metering on output of selected channel.
- Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
- 1 unit rack space.
- Inputs and Outputs are balanced XLRs at +4dBu.
|
- Connect HDMI sources to your audio equipment, even if they lack a dedicated audio output (Apple TV 4, Chromecast, Wii U, media players).
- Listen to music (MP3, audio streams, radio channels) without requiring the TV being turned on.
- Versatile problem solver when connecting your audio equipment to your TV, monitor or projector.
- Determine your desired audio format using the unique EDID switch.
- Play the audio from your Smart TV applications (Netflix, YouTube) or built-in TV decoder on your home cinema set, audio amplifier or soundbar.
- Use your TV's Audio Return Channel (ARC) function, even when your audio equipment is not suitable for this.
Still want to connect your Apple TV 4, Google Chromecast or TV without an audio output to your audio equipment? You can with the Connect AE14.
This HDMI audio extractor with ARC allows you to extract audio from your HDMI source or TV and to forward it to the speakers of a home cinema set, audio amplifier or soundbar.
The products the Connect-series can be used if the inputs and outputs of equipment cannot be connected with each other by default.
Connections
|
|
AV input |
1 x HDMI |
AV output |
1 x HDMI |
HDMI cable length |
15 metres (max.) |
Digital audio output |
1 x Toslink (optical), 1x coaxial |
Analogue audio output |
1 x stereo 3.5 mm jack |
Video
|
|
Supported resolution |
Max. 2160@30Hz |
HDMI standards |
HDMI 1.4, HDCP, CEC, ARC, EDID, DVI, Deep Color 36-bit, 3D formats and x.v. Colour |
Video bandwidth |
10.2 Gbps |
Clock frequency |
300 MHz |
HDCP standards |
HDCP 1.4/2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 of 4:2:2 |
Colour depth |
Max. 36-bit |
Audio
|
|
Digital audio output |
DTS 5.1, Dolby Digital/AC3 and PCM 2.0 CH |
Analogue audio output |
2.0 CH |
General
|
|
Dimensions (h x w x d) |
20 x 70 x 68 mm |
Weight |
130 grams |
Ambient temperature |
+0 to +70 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Features: Two channel / four way split Channels linkable for 1 in, 8 out Ultra low noise design ?SilentSwitch? Phantom Power switch ?20 dB pad switch 0 to +40 dB Gain available via rear switches Electronically Balanced Inputs and Outputs (standard) Transformer Balanced Outputs option 12 VDC supply connector for remote or mobile applications Intuitive, 'user friendly' layout Flawless performance in any audio environment
Today?s venues face a growing need to provide a multiplicity of audio feeds from presentations, conferences, orchestral performances and lectures. The advent of digital broadcasting, the growth of webcasts and direct-to-CD archiving highlight the deficiencies in audio splitting systems more than ever before. Whether the final product is a broadcast feed or CD sales of an unrepeatable lecture, performance or event, end-users? expectations of audio quality are higher than ever.With these requirements in mind, ARX has developed the MSX 8 Active Microphone/Line Splitter to deliver the performance required by today?s standards of audio production. Active microphone and line splitting has a number of benefits over passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. All of which translate into superb audio quality for your clients. About the MSX 8 The MSX 8 consists of two channels of actively buffered ultra low noise Microphone/ Line Splitter. Each of these channels has four electronically Balanced splits ? two on the rear panel, plus two more on the front panel. All four output splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED.Gain through the MSX 8 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links Channel 1 to Channel 2, providing an ultimate maximum of 8 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted.For remote or mobile applications a 5 pin DIN connector on the rear panel provides an access point to connect a 12V DC power supply Inside Information Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout.Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1as required. Internal Power Supply The MSX 8 has a low noise transformer based power supply to obtain the maximum benefit from the ultra low noise design of the splitter circuitry. Summing up, the feature packed MSX 8 is the answer wherever transparent signal buffering and routing is required. T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Gain Switch +20dB gain Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping 12 Volt Connector 5 pin DIN AC Mains Input Fused IEC socket AC Power 100-120VAC 2 amp, 220-240VAC 1 amp Transformer Type Low noise toroidal Size 19?W x 1??H x 6?D, 482 x 44 x 125 mm Weight 5 lbs (2.2 Kg)
Front Panel A and B balanced XLR Output splits Channels 1 and 2. Pin 3?-, Pin 2 +, Pin 1 Ground 48V Phantom Power switch and LED Channel link switch and LED switch ?20dB pad switch Numbered marker panel for labelling individual channel assigns AC power LED Rear Panel Channel Gain DIP switches: 0, +10, +20, +30, +40dB Balanced XLR Input Channels 1 and 2. Pin 3 ?, Pin 2 +, Pin 1 Ground Balanced XLR Main (FOH) Output (same wiring as Input) Channels 1 and 2 Balanced XLR Monitor Output (same wiring as Input) Channels 1 and 2 12 Volt DC power supply input for remote or mobile applications IEC 3 pin AC connector and integral fuseholder. Replace fuse with correct value only: 100?120 V AC 2 amp, 220?240 V AC 1 amp |
- Connect 2 TVs or projectors and switch between 4 connected HDMI devices.
- HDMI matrix switch allows you to watch other HDMI devices on 2 screens independently.
- Use the built-in 1080p downscaler in case 1 or more screens do not support 4K resolution.
- Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
- Supports Dolby Atmos and DTS:X and all other common audio formats.
- With additional digital audio output to also connect your AV receiver using a single cable.
- Supports Audio Return Channel (ARC) to avoid lip-sync problems.
- Switches automatically and/or with remote control.
Connections
|
|
AV input |
4 x HDMI |
AV output |
2 x HDMI |
Digital audio output |
1x Toslink (optical) |
Video
|
|
Video resolution |
Max. 4K60 (3840 x 2160@60 Hz) |
PC resolution |
Max. 2560 x 2048 Hz |
Video bandwidth |
18 Gbps |
Clock frequency |
Max. 600 MHz |
HDMI standard |
HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats |
HDCP standard |
HDCP 2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2 |
Colour depth |
Max. 36 bit |
Audio
|
|
HDMI audio |
DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo |
Optical Audio |
Dolby Digital/AC3, DTS 5.1 and PCM stereo |
General
|
|
Dimensions (h x w x d) |
18 x 242 x 104 mm |
Weight |
620grams |
Power |
100-240 VAC 50/60 Hz, 12 VDC adapter |
|
Features: Eight channel / four way split per channel Channels linkable up to 1 in, 32 out Ultra low noise design 'SilentSwitch' Phantom Power switching ?20 dB pad switch 0 to +40 dB Gain available via rear switches Headphone monitoring and PFL metering Electronically Balanced Inputs and Outputs (standard) Transformer balanced Outputs option Intuitive, 'user friendly' layout Flawless audio performance
EC-2 Superb Audio Quality Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. About the MSX 32 With these benefits in mind, the ARX MSX 32 Active Microphone/Line Splitter has been developed to deliver the performance required by the increasing complexity of today?s standards of audio production. The MSX 32 consists of eight channels of actively buffered ultra low noise Microphone/Line Splitter. Each of these channels has four electronically Balanced splits ? two outputs on the rear panel for Main and Monitor, plus two more output splits on the front panel. All splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED. A PFL switch and 6 LED metering enables each channel to be easily checked with headphones for signal monitoring, and also for line tracing when troubleshooting. Gain through the MSX 32 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links each channel to the previous one, providing an ultimate maximum of 32 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted. Number stickers are provided to give each channel an individual number for up to 40 channels when multiple MSX32s are being used.Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout. Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1 as required. Internal Power Supply The MSX 32?s internal toroidal transformer based power supply is triple shielded to get the maximum benefit from the ultra low noise design of the splitter circuitry. An illuminated power switch on the front panel provides visual confirmation of AC power connection to the unit.The headphone output and the 6 LED PFL metering are both mounted on the right hand side of the front panel. Rear panel connectors enable this function to be linked when using multiple MSX 32 units. To sum up, this feature packed two RU device is the answer wherever transparent signal buffering and routing is required.
T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping Headphone Output 2 watts/8 ohms AC Mains Input Fused IEC socket AC Power 100-120V AC 2 amp 220-240V AC 1 amp Transformer Type Low noise shielded toroidal Size 2 RU - 19?W x 3½?H x 8?D, 482 x 89 x 200 mm Weight E model - 15 lbs (7 Kg) | Practical distributor with 1 input and 6 outputs
- Extends every mixer with additional outputs
- 1 stereo XLR input
- 6 stereo zone outputs (XLR)
- Each zone with level control and mono switch
- LED display of signal input and mono/stereo mode
- (19") 48.3 cm rack installation 1 U
- For application areas such as: Installation; restaurants, bars and hotels; sports centres/gyms
Package contents
- 1 x device, 1 x power cord, 1 x user manual
Power supply: |
115/230 V AC, 50/60 Hz |
Power consumption: |
7 W |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
S/N ratio: |
>69 dB |
THD: |
<0,2 % at 1 kHz |
Impedance: |
Input: 45,1 kOhm
Output: 125 Ohm |
Gain: |
15 dB |
Max. level: |
Input: +9 dBV
Output: +22 dB |
Color: |
Black |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimensions: |
Width: 48,3 cm
Depth: 12,6 cm
Height: 4,45 cm |
Weight: |
2,33 kg |
|
Reviews
There are no reviews yet.