The DS501 is a sophisticated dual channel noise gate with fully tuneable \’Peak Punch\’ incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates. Features: \’Tuneable\’ Peak Punch. Variable high pass and low pass filters for \”frequency conscious\” gating. Comprehensive envelope control, attack, hold, […]
The DS501 is a sophisticated dual channel noise gate with fully tuneable \’Peak Punch\’ incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.
Features:
\’Tuneable\’ Peak Punch.
Variable high pass and low pass filters for \”frequency conscious\” gating.
Comprehensive envelope control, attack, hold, decay, and range.
Key input for external triggering.
\”Key Listen\” facility.
Extremely fast attack time, to preserve the natural attack of the sound.
Balanced inputs and outputs.
Stereo linkable.
Can be used for \”Gating\” or \”Ducking\”.
High audio specification.
Positioned in the Drawmer range over the industry standard DS201 Dual Gate, the DS501 Power Gate features a new dual mode ‘tuneable’ Peak Punch processing section on each channel. In tuneable mode a fully variable frequency selector with a range from 75Hz to 16kHz allows the user to shape the transients of the gated signal and ‘tune-in’ to the particular area of the audio spectrum where the Peak Punch is to be active. In addition a variable ‘more’ control allows the user to tailor the amount of processing. A secondary Full Band Peak Punch mode is also available.
Designed principally for drum and percussive gating applications, tuneable Peak Punch makes it possible to add transient punch to frequencies lacking in individual drum sounds, adding greater definition and presence to the gated signal. Using low frequency Peak Punch adds depth to thin drums, whilst higher frequency Peak Punch can dynamically emphasise rim shots or the ‘crack’ of a snare drum. Setting up noise gates can be tedious and unrewarding. For example, when attempting to separate a signal from unwanted noise or crosstalk that is relatively high in level, spurious triggering of the gate by unwanted components within the sound can be a serious problem. This can often be experienced in the studio when recording a drum kit. If a gate is used to clean up the snare drum sound it is quite likely that the nearby hi-hats will spill into the snare drum microphone and cause the gate to open. Increasing the threshold level may cure this problem, but then there is a very real danger that any quieter snare drum beats may not cause the gate to open at all and the performance can easily be ruined.
The DRAWMER solution to this problem is the inclusion of two variable filters, one high-pass and one low-pass, which act upon the side-chain keying circuitry. By setting the output switch to key listen the user can hear the action of the filters and adjust them to reject high frequency spillage from the hi-hats. This now enables the gate to only open on the lower frequencies present in the snare drum.
The very fast attack of the DS501 means that it can open in a matter of micro seconds, thus preserving the natural attack of whatever sound is being gated and the comprehensive envelope controls mean that the gain can be changed at whatever rate best suits the material being processed. With vocals for example, a fairly fast attack is needed so as not to clip the leading consonants but a slower release time will prevent the end of words being clipped off and will also fade out any noise gradually rather than cutting it off abruptly. This latter point is very important as the human ear is far more sensitive to rapidly changing noise levels than to a constant low level noise.
Another important role played by the gate is in the reshaping of existing sounds. An example of this might involve a simple sampling delay line used to store a sound to be re-triggered later and added to a mix. A gate can be used to impart a slower attack or faster decay to the sound and careful setting of the decay envelope can effectively hide any noise present at the end of the sample. When using a sampler or drum machine the gate can be considered a triggered envelope shaper, and the wide range allowed by the envelope controls make the DS501 ideal for this application.
The unit can be switched to accept a key input, which allows the gate to be triggered externally. An example of this would be to use a snare drum signal to open the gate on a separate ambient microphone to create a natural alternative to gated reverb.
Each channel can be individually switched from Gating to Ducking for \’voice over\’ applications or the removal of \’clicks\’ and \’pops\’.
Weight
3.00 kg
Reviews
There are no reviews yet.
Be the first to review “DRAWMER DS501 – Power Gate” Cancel reply
The DS501 is a sophisticated dual channel noise gate with fully tuneable \'Peak Punch\' incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.
Features:
\'Tuneable\' Peak Punch.
Variable high pass and low pass filters for \"frequency conscious\" gating.
Comprehensive envelope control, attack, hold, decay, and range.
Key input for external triggering.
\"Key Listen\" facility.
Extremely fast attack time, to preserve the natural attack of the sound.
Balanced inputs and outputs.
Stereo linkable.
Can be used for \"Gating\" or \"Ducking\".
High audio specification.
Positioned in the Drawmer range over the industry standard DS201 Dual Gate, the DS501 Power Gate features a new dual mode ‘tuneable’ Peak Punch processing section on each channel. In tuneable mode a fully variable frequency selector with a range from 75Hz to 16kHz allows the user to shape the transients of the gated signal and ‘tune-in’ to the particular area of the audio spectrum where the Peak Punch is to be active. In addition a variable ‘more’ control allows the user to tailor the amount of processing. A secondary Full Band Peak Punch mode is also available.
Designed principally for drum and percussive gating applications, tuneable Peak Punch makes it possible to add transient punch to frequencies lacking in individual drum sounds, adding greater definition and presence to the gated signal. Using low frequency Peak Punch adds depth to thin drums, whilst higher frequency Peak Punch can dynamically emphasise rim shots or the ‘crack’ of a snare drum. Setting up noise gates can be tedious and unrewarding. For example, when attempting to separate a signal from unwanted noise or crosstalk that is relatively high in level, spurious triggering of the gate by unwanted components within the sound can be a serious problem. This can often be experienced in the studio when recording a drum kit. If a gate is used to clean up the snare drum sound it is quite likely that the nearby hi-hats will spill into the snare drum microphone and cause the gate to open. Increasing the threshold level may cure this problem, but then there is a very real danger that any quieter snare drum beats may not cause the gate to open at all and the performance can easily be ruined.
The DRAWMER solution to this problem is the inclusion of two variable filters, one high-pass and one low-pass, which act upon the side-chain keying circuitry. By setting the output switch to key listen the user can hear the action of the filters and adjust them to reject high frequency spillage from the hi-hats. This now enables the gate to only open on the lower frequencies present in the snare drum.
The very fast attack of the DS501 means that it can open in a matter of micro seconds, thus preserving the natural attack of whatever sound is being gated and the comprehensive envelope controls mean that the gain can be changed at whatever rate best suits the material being processed. With vocals for example, a fairly fast attack is needed so as not to clip the leading consonants but a slower release time will prevent the end of words being clipped off and will also fade out any noise gradually rather than cutting it off abruptly. This latter point is very important as the human ear is far more sensitive to rapidly changing noise levels than to a constant low level noise.
Another important role played by the gate is in the reshaping of existing sounds. An example of this might involve a simple sampling delay line used to store a sound to be re-triggered later and added to a mix. A gate can be used to impart a slower attack or faster decay to the sound and careful setting of the decay envelope can effectively hide any noise present at the end of the sample. When using a sampler or drum machine the gate can be considered a triggered envelope shaper, and the wide range allowed by the envelope controls make the DS501 ideal for this application.
The unit can be switched to accept a key input, which allows the gate to be triggered externally. An example of this would be to use a snare drum signal to open the gate on a separate ambient microphone to create a natural alternative to gated reverb.
Each channel can be individually switched from Gating to Ducking for \'voice over\' applications or the removal of \'clicks\' and \'pops\'.
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
VT-737SP SPECIFICATIONS Circuit topology Four dual triode vacuum tubes (Sovtek 6922), high-voltage discrete Class A Gain Range Microphone: Transformer balanced 850/2500 ohm, 0dB to +58dB Instrument: Unbalanced 1 meg ohm, 0dB to+30dB Line: Balanced Class A 20k ohms, -27dB to 28dB Maximum input level and connector types Microphone26dB@25Hz, +30dB@1kHz balanced XLR Instrument+30dB unbalanced front panel jack socket Line +36dB balanced XLR Maximum output level +30dB balanced 600 ohms, DC coupled, discrete Class A Output type and gain XLR connector, output trim gain -45dB to20dB Noise 20kHz unweighted -92dB Noise microphone EIN -116dB, 22Hz to 22kHz unweighted Distortion THD, IMD 0.5% Frequency response -/2.5dB 10Hz to 120kHz input filter included Frequency response -3dB 1Hz to 200kHz line in-out VU meter and gain reduction High quality illuminated OVU =+4dB and gain reduction to -20dB High cut filter Variable 6dB per octave 30Hz to 140Hz Compressor type Optical passive attenuator incorporating twin vacuum tubes and stereo link Threshold - Ratio Threshold variable -30dB to +20dB, ratio-compression variable 1:1 to 20:1 Attack - Release Attack variable 2mS to 200mS, release variable 100mS to 5 seconds Equalizer type Discrete Class A, variable active and switched passive design Frequency bands (4) Treble - switched 10kHz, 15kHz, 20kHz, 32kHz, +/- 20dB range, shelf High mid - variable 200Hz to 2k8Hz and 2kHz to 28kHz, +/- 16dB range, hi-lo Q Low mid - variable 30Hz to 450Hz and 300Hz to 4k5Hz, +/- 16dB range, hi-lo Q Bass - switched 15Hz, 30Hz, 60Hz, 150Hz, +/- 24dB range, shelf AC power Internal toroidal 100v to 240v, 50-60Hz selectable, 75 watts maximum Dimensions 19 x 12 x 3.5 in (482 x 305 x 89mm) Weight 22lbs (10kg) Dimensions-shipping carton 21 x 18 x 8 in (533 x 457 x 203mm) Weight-packed 26lbs (11.8kg)
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
Four independent channels of operation, stereo linkable in two pairs
PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
Independent Threshold and ratio controls
Switchable OverEasy® or Hard Knee compression
Classic dbx® compression
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
True RMS level detection
Precision metering of input level, output level, and gain reduction
Dual True stereo or quad mono operation
Switchable +4dBu or -10dBV operation per channel
Input Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input
> +22 dBu balanced or unbalanced
CMRR
Typically >50 dB at 1 kHz
Output Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type
Servo-balanced/unbalanced, RF filtered
Output Impedance
Balanced 30 Ohm, unbalanced 15 Ohm
Max Output
> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response
0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range
> 118 dB, unweighted
THD+Noise
>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling
True RMS Power Summing
Compressor Threshold Range
-40 dBu to +20 dBu
Compressor Ratio
1:1 to infinity:1
Compressor Threshold Characteristic
Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic
AutoDynamic™
Compressor Attack Time
Program-dependent
Compressor Release Time
Program-dependent
Compressor Output Gain
-20 to +20 dB
Limiter Threshold Range
0 dBu to +24 dBu (off)
Limiter Ratio
infinity:1
Limiter Type
PeakStopPlus® two-stage limiter
Limiter Stage 1
PeakStop® brickwall limiter
Limiter Stage 1 Attack Time
Zero
Limiter Stage 1 Release Time
Zero
Limiter Stage 2
Predictive intelligent program limiter
Limiter Stage 2 Attack Time
Program-dependent
Limiter Stage 2 Release Time
Program-dependent
OverEasy® Switch
Activates the OverEasy compression function
I/O Meter Switch
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch
Activates the direct input-to-output hard-wire bypass
Operating Level Switch
(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch
Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator
1 LED to indicate PeakStop™ limiting
Function Switches
LED indicator for each front-panel switch
Output Transformer Options
Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage
Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption
20 Watts
Fuse
100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.