An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
Features
3 Music Source Inputs individually selectable to each output
One Input Source with Override facility (Jukebox or Auto Announcer)
5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones
Can be expanded interlink of two or more MS520 units
Full Digital Matrix control of functions to all 5 zones
Up to 10 remote control panels RC 62 can be connected to each MS 520
AMPLIFIER SPECIFICATIONS
Power output:
5 x 20
Watt rms
Frequency Response (Music):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Direct):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Paging):
200 ÷ 18
Hz ÷ kHz
Distortion:
0.5
%
Signal / noise ratio (Music):
-78
dB
Signal / noise ratio (Direct):
-78
dB
Signal / noise ratio (Paging):
-60
dB
INPUT SECTION
Input sensitivity (Music):
-16
dBu
Input sensitivity (Direct):
-16
dBu
Input sensitivity (Paging - Line):
- 43 ÷ -27
dBu
Input sensitivity (Paging - Mic):
- 58 ÷ -41
dBu
Bass Tone:
(100 kHz) ± 8
dB
Treble Tone:
(12.5 kHz) ± 8
dB
OUTPUT SECTION
Out level:
-6 / -10
dB
Protections:
Short ciurcuit, thermal, AC / DC fuses
Power supply:
16
V dc
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 V ~ 50 / 60 Hz
V ~ Hz
Power (consumption):
370
W
Max. Available power:
100
W
PHISICAL SPECIFICATION
Width:
438 / 17.24
mm/inch
Height:
44 / 1.73
mm/inch
Depth:
253 / 9.96
mm/inch
Net Weight:
3.66 / 8.06
Kg/Lbs
SHIPPING INFORMATION
Package height:
75 / 2.95
mm/inch
Package width:
520 / 20.47
mm/inch
Package depth:
280 / 11.02
mm/inch
Shipping Weight:
4.18 / 9.21
Kg/Lbs
The Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to ‘add’ Dante to one or more BLU link devices.
The BLU-DAN is configurable through HiQnet Audio Architect. A rich palette of logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment.
The BLU-DAN features Dante audio. The BLU-DAN is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port.
The BLU-DAN also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.
The BLU-DAN and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Features
AES67 and Dante Audio with support for Dante Domain Manager
BLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
‘Add’ Dante / AES67 to one or more BLU link devices
Clear Front Panel LED Indication
Bi-Directional Locate Functionality
HiQnet Device
Configuration, Control and Monitoring from HiQnet Audio Architect
1RU, Half-Rack Device
AES67 Compatible
EN 54-16 Compliant for life safety applications
*The price is without VAT
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function
Four channel expander/gate
Number of Channels
4
Inputs
4 x XLR, 4 x TRS 1/4" phone
Output
4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level
+21dBu
Compression Threshold
Not applicable
Compression Ratio
Not applicable
Attack Time
Not applicable
Release Time
Not applicable
Gate Threshold
0 to -80dB
Gate Rate
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable
Maximum Output Level
+21dBu
Make-up Gain
Not specified by manufacturer
Frequency Response
18HZ to 30kHz
Dynamic Range
Not specified by manufacturer
Noise
>95dBu, unweighted, 22Hz to 22kHz
Dimensions
1U rack mount, 8 1/2" deep
Specialties
Unit will operate at either +4dB or -10 dB
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
Wireless Digital Audio Transmitter System
Operating Band ISM 2.4GHz (free band).
One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
GFSK digital modulation/demodulation.
External antenna can help to increase the transmission distance.
Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
Automatic mute in bad channel quality conditions or high error code rate.
Transmission distance higher than 30 meters in open places.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.