DSPPA MP-9913B Audio Distributor

 



Performance characteristic


Micro computer chip control, light-touch button.
2 Channel inputs(A&B), 10 channel output.
2 input alarm logic selected.
The channel will be switched to input B automatically while alarming.
Alarm indicator and output indicator.

Features
Unique ?user-friendly? Zoner/Mixer
Choice of four program sources to two zones
Comprehensive microphone control options
Local or Remote Master zone control
Mic and Zone EQ controls
Switchable voice override
Multiple stereo inputs; Balanced XLR outputs
Intuitive layout for non-technical operators

 
Innovation
The ARX BarMIX is a unique ?user-friendly? Zoner/Mixer, enabling a
choice of four stereo audio sources to be routed to each of two zones.
Intuitive Layout
The linear ergonomic flow of the front panel controls, coupled with the
visual feedback of level settings and source selection makes using the
BarMIX totally intuitive, even for casual staff with no prior experience.
Up to four stereo sources can be connected to the BarMIX, such as:
Tape/cassette/DVD/CD decks, TV/Satellite/video audio, Juke Box/Karaoke
systems. Interlocking switches for each source ensure that there is no
risk of accidentally selecting two sources for the one zone.Each switch
has an associated status LED for easy at-a-glance confirmation of which
program source is active, and numbered panels above each switch let you
label each source.The BarMIX has provision for connecting a microphone,
to allow announcements to made in the zones. There is comprehensive 3
way EQ and an individual level control for the microphone on the front panel,
as well as a Gain trim control on the rear.Front panel switches turn the
microphone on for each zone, and there is also provision to connect a push-
to-talk signal for priority/evac override.
Control Options
Each of the two output zones has the option of being controlled Locally, ie
from the control on the unit itself, or Remotely, with the optional BM-1 VCA
Remote Level Control pack (See Right) Fitting this option will disable the front
panel control. A front panel LED indicates if this option is fitted and active.
This is useful if the unit needs to be mounted some distance away from where
it is likely to be controlled.For example, the BarMIX unit may be installed alongside
other audio equipment in an equipment room, while the Remote can be located
somewhere convenient - behind the bar, for example.From a security point of view,
or where volume can be a neighbour problem, this option provides ultimate over-riding
level control well out of the way of prying fingers!From a security point of view, or
where volume can be a neighbour problem, this option provides ultimate over-riding
level control well out of the way of prying fingers!
Zone Setup
On the rear, each input source has a Left and Right phono (RCA type) input and an
associated Gain trim control. This allows level matching of all four sources, so there
is no need to reset the Zone output levels when switching between sources.
Each Zone has Left and Right Balanced XLR outputs, plus dual LED meters show output
levels for each zone.
Universal AC Power
AC power is a universal 100 to 120V or 220 to 240V, and is connected to the unit via a
removable power lead and standard 3 pin IEC connector, with built in fuse and voltage
selection switch.
The intuitive layout and precise control offered by the ARX BarMIX make it the ideal choice
for any Zone mixing installation application.

T E C H N I C A L  S P E C I F I C A T I O N S
Input Impedance
Microphone 4 KOhms balanced, Line 100 KOhms unbalanced
Input Gain
Microphone Variable 20 dB to 60 dB with rear trim control,
Line ?10 to +10 dB
Output Level (Max) + 21dB
Signal to Noise ratio -90 dB ?A? weighted, all inputs @ unity,
Master @ unity
Distortion @ Unity Gain Below .005% 100Hz to 10 KHZ
Dynamic Range 115 dB
Mic Channel EQ
Low 100Hz 15dBCut/Boost
Mid 800Hz 15dB Cut/Boost, Broad Q
High 10KHz 15dBCut/Boost
Zone EQ
Low 100Hz 10dBCut/Boost
High 10KHz 10dBCut/Boost
Level Control Infinity to +6dB Gain (0 to 11)
Push to Talk Connector
TRS jack socket, wired Tip and Ring shorted to Duck
Hi Z Input Connectors Phono (RCA type)
Balanced Output Connectors Male XLR: Pin 1 Ground, Pin 2 +, Pin 3 ?
Frequency Response 20Hz?20KHz ±1dB
Power Requirements 100-120/220-240 V AC, 50/60 Hz 8VA (8 watts)
on 3 pin IEC connector
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm
BM-1 Remote Level Control DC controlled VCA kit disables front panel
Level control. Wall plate connects to BarMIX via balanced cable with TRS
jack connector. Use 1 per Zone
 

INPUTS:    4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks.
OUTPUTS:    4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks.
MAX OUTPUT LEVEL:    5.2Vpp (+7dBu).
AUDIO BANDWIDTH (-3dB):    100kHz.
S/N RATIO:    90dB.
CROSSTALK:    -79dB @1kHz.
THD @1kHz:    0.018%.
2nd HARMONIC:    0.002%.
POWER SOURCE:    12V DC, 20mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

INPUTS:    2 balanced stereo audio +4dBu/50kΩ on XLR (F) connectors.
OUTPUTS:    10 balanced stereo audio +4dBu/50Ω on XLR (M) connectors.
MAX. OUTPUT LEVEL:    23.8Vpp.
BANDWIDTH (-3dB):    >100kHz.
S/N RATIO:    89.3dB.
CROSSTALK:    -78dB.
CONTROLS:    Level (x2): -0.7dB to +5.1dB, mode selector switches.
COUPLING:    AC (input); DC (output).
AUDIO THD + NOISE:    0.081%.
AUDIO 2nd HARMONIC:    0.006%.
POWER SOURCE:    230V AC, (115V AC USA), 6VA.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    2.6kg (5.7lbs) approx.
ACCESSORIES:    Power cord.

INPUT:    1 mono microphone, 5mVpp/10kΩ on a 6.5mm phone jack.
OUTPUTS:    4 mono line level, 1Vpp/150Ω on 6.5mm phone jacks.
MAX. OUTPUT LEVEL:    4.8Vpp.
AUDIO BANDWIDTH (-3dB):    37kHz.
GAIN CONTROL:    5dB to 54dB.
S/N RATIO:    78dB.
THD @1kHz:    0.1%.
POWER SOURCE:    12V DC, 20mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

NPUT:    1 balanced audio stereo: +4dBu/100kΩ on detachable terminal blocks.
OUTPUTS:    3 balanced audio stereo: +4dBu/150Ω on detachable terminal blocks.
MAX. OUTPUT LEVEL:    20dBu.
BANDWIDTH (-3dB):    >100kHz.
S/N RATIO:    87.6dB.
CONTROL:    Output level control: -0.5dB to +8.6dB.
COUPLING:    DC.
AUDIO THD + NOISE:    0.024%.
POWER SOURCE:    12V DC 40mA.
DIMENSIONS:    11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply.
OPTIONS:    RK-SM 19" rack adapter.