DUAL CS 440 MANUAL/AUTO (MOTOR AND BELT DRIVE) TURNTABLE 33-45rpm

No longer available!

335.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: CS 440 Categories:
  • Drive technology Belt drive with ground flat belt. Electronically controlled DC motor. Viscosity-attenuated tonearm lift. Automatic tonearm attachment. Final shutdown with tonearm return.
  • Tonearm technology Weight-balanced tonearm. Preset support force and antiskating. Tone head with 13mm (1/2-inch) system attachment. Torsion stiff tonearm head.
  • Chassis technology Vibration-absorbed wooden housing. Aluminum plate with antistatic treated felt covering.
  • Drive technology Belt drive with ground flat belt. Electronically controlled DC motor. Viscosity-attenuated tonearm lift. Automatic tonearm attachment. Final shutdown with tonearm return.
  • Tonearm technology Weight-balanced tonearm. Preset support force and antiskating. Tone head with 13mm (1/2-inch) system attachment. Torsion stiff tonearm head.
  • Chassis technology Vibration-absorbed wooden housing. Aluminum plate with antistatic treated felt covering.

 

Read more

 

Dual CS 440 Turntable

The CS 440 is the basic model of Dual. Processed solidly and easy to use, it is the best solution for the entry into the world of vinyl. Due to the pre-installed tracking force and antiskating force the startup is as easy as winking – unpack , connect, put a record on and enjoy the music.

Tonearm technology

Weight balanced tone arm. Pre-set tracking force and anti-skating. Headshells with 13mm (1/2-inch) – fixing-holes. Torsion headshell.

Chassis technology

Vibration damping wooden chassis. Floating sub chassis. Aluminium platter with antistatic felt mat.

Drive technology

Belt drive with polished flat belt. Electronically controlled DC motor. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Supplied with magnetic AT 91E cartridge.

Speed r/min. 33/45
Speed accuracy +/- 0,7 % DIN
Rumple unweighted signal-to-noise ratio 46 dB
Rumple weighted signal-to noise ratio 68 dB
Cartridge system Audio Technica AT-91E
Frequency Response 20 Hz – 20 kHz
Connections 1 x RCA Stereo Cable, 1 x Ground Cable
Power supply 12V DC, 150 mA
Dimensions (WxHxD) 420 x 125 x 360 mm
Weight 3.78 kg
Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “DUAL CS 440 MANUAL/AUTO (MOTOR AND BELT DRIVE) TURNTABLE 33-45rpm”

Your email address will not be published. Required fields are marked *

Quick Comparison

DUAL CS 440 MANUAL/AUTO (MOTOR AND BELT DRIVE) TURNTABLE 33-45rpm removePro-Ject Elemental Phono USB + OM 5e Turntable Red-Black removePro-Ject Essential II with phono USB Turntable Red removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removeDENON DP-300F Belt-driven automatic turntable with cartridge remove
NameDUAL CS 440 MANUAL/AUTO (MOTOR AND BELT DRIVE) TURNTABLE 33-45rpm removePro-Ject Elemental Phono USB + OM 5e Turntable Red-Black removePro-Ject Essential II with phono USB Turntable Red removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removeDENON DP-300F Belt-driven automatic turntable with cartridge remove
ImageCS-440 dual turntable belt drive artsoundcs455-1 silver e phono preamp turntable dualDENON DP-300F Belt-driven automatic turntable with cartridge
SKUCS 440ELEMENTALUSBRBESIIUSBREDELEMENTALSBCS 455-1DP-300F
Rating
Price 335.00 incl. GR VAT335.00 incl. GR VAT 384.39 incl. GR VAT 289.89 incl. GR VAT 500.00 incl. GR VAT 369.00 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Only 1 left in stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Only 1 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Drive technology Belt drive with ground flat belt. Electronically controlled DC motor. Viscosity-attenuated tonearm lift. Automatic tonearm attachment. Final shutdown with tonearm return.
  • Tonearm technology Weight-balanced tonearm. Preset support force and antiskating. Tone head with 13mm (1/2-inch) system attachment. Torsion stiff tonearm head.
  • Chassis technology Vibration-absorbed wooden housing. Aluminum plate with antistatic treated felt covering.
Content 

Dual CS 440 Turntable

The CS 440 is the basic model of Dual. Processed solidly and easy to use, it is the best solution for the entry into the world of vinyl. Due to the pre-installed tracking force and antiskating force the startup is as easy as winking - unpack , connect, put a record on and enjoy the music.

Tonearm technology

Weight balanced tone arm. Pre-set tracking force and anti-skating. Headshells with 13mm (1/2-inch) - fixing-holes. Torsion headshell.

Chassis technology

Vibration damping wooden chassis. Floating sub chassis. Aluminium platter with antistatic felt mat.

Drive technology

Belt drive with polished flat belt. Electronically controlled DC motor. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Supplied with magnetic AT 91E cartridge.
Speed r/min. 33/45
Speed accuracy +/- 0,7 % DIN
Rumple unweighted signal-to-noise ratio 46 dB
Rumple weighted signal-to noise ratio 68 dB
Cartridge system Audio Technica AT-91E
Frequency Response 20 Hz - 20 kHz
Connections 1 x RCA Stereo Cable, 1 x Ground Cable
Power supply 12V DC, 150 mA
Dimensions (WxHxD) 420 x 125 x 360 mm
Weight 3.78 kg

Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.

The only plastic here is the stylus guard!

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.

• Belt drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low resonance MDF platter with felt mat
• 8,6” ultra low mass tonearm with straight arm tube
• Pre-adjusted tracking force & antiskating
• Gold-plated RCA contacts & cartridge pins
• Integrated phono stage with precise RIAA equalisation
• Line level output
• A/D converter for vinyl recording with USB B output

• Colour options: red-black, white-black, silver-black

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net
Cardan bearing with zero-mass tracking force setting by a high-precision torsion spring. Removable headshell with 1/2 inch fixing holes. Adjustable tracking force and anti-skating. Headshell made of carbon fiber for special rigid torsion. Chassis technology Solid wooden console. Floating sub-chassis.Vibration -damped aluminum turntables with anti-static felt mat. Drive technology Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back archived discs with a rotational speed of 78 Upm. Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes. Tone arm technology: Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber. Chassis technology: Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat. Drive technology: Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge. Specifications:
  • Speed r/min.: 33/45/78
  • Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
  • Rumble-to-noise ratio: 48 dB
  • Rumble-noise ratio: 72 dB
  • Cartridge system: OMB 10
  • Frequency Response: 20 Hz - 22 kHz
  • Depth sensing capability (300 Hz): 70 µm at 315 Hz
  • Dimensions (WxHxD): 440 x 119 x 360 mm
  • Weight: 5,43 kg
  • Colour: black / silver
  • Power supply: 12V DC, 150 mA
DENON DP-300F Belt-driven automatic turntable with cartridge Fully automatic operation makes the DP-300F easy to use. With the touch of a button, the tonearm swings over and begins playing your record, returning to its original position when finished. Details: aluminum platter built-in phono preamp belt-drive system with DC servo motor dynamic balance tonearm with universal mount fully automatic operation manual lifter mechanism replaceable moving magnet cartridge included removable dust cover heavy base construction minor assembly required two speeds: 33-1/3 rpm & 45 rpm wow & flutter 0.10% weight: 6 kgs dimensions:17-1/16“W x 4-13/16“H x 15“D
Weight4.00 kg3.50 kg5.00 kg3.50 kg6.00 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 3.50 kg
Weight 5.00 kg
Weight 3.50 kg
Weight 6.00 kg
Weight 6.00 kg