| Content | Ortofon DN165E Stylus Technical Data
- Frequency range20-25.000 Hz
- Frequency response20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force70 µm
- Compliance, dynamic, lateral25 µm/mN
- Stylus typeElliptical
- Stylus tip radiusr/R 8/18 µm
- Equivalent stylus tip mass0,5 mg
- Tracking force range1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended1,5 g (15 mN)
- Tracking angle20°
- Stylus colourBlack
- Recommended for following cartridgesDual ULM 65 E
|
|
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Stylus 2M Black
| Technical data |
|
| Frequency range |
20-31.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / - 0 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
22 µm/mN |
| Stylus type |
Nude Shibata |
| Stylus tip radius |
r/R 6/50 µm |
| Tracking force range |
1,4-1,7 g (14-17 mN) |
| Tracking force, recommended |
1,5 g (15 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
2M Black |
*) Typical value | Stylus 2M Red
| Technical data |
|
| Frequency range |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,6-2,0 g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Stylus colour |
Red |
|
|
| Recommended for following cartridges |
2M Red |
*) Typical value |
This replacement stylus is designed for playback on coded vinyl. It has a superior tracking ability and causes low record wear. It is a spherical stylus with an output of 8.0 mV. |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
|
Reviews
There are no reviews yet.