DUAL CS-505-4 TURNTABLE SEMI-AYTOMATIC

A MUSICAL FAMILY

The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts. And both share a number of technical features with the TD 309, ensuring that their replay quality is up there with the best.

The new TP 90 tonearm is based on the tried-and-tested TP 92 and uses the same ultra-low-friction, high-performance bearing and the innovative zero-stiction anti-bias system. The arm tube is made from rolled aluminium that is damped using RMR technology (reduced-modal-resonance), and the stainless-steel counterweight at the end of the arm tube is double-decoupled. Tonearm height, azimuth and overhang are useradjustable.

• Low Noise, Low Voltage electronically speed controlled DC Motor
• Adjustable belt tension for best performance
• Two-part aluminium/acrylic platter
• New TP 90 tonearm with precision Japanese bearings
• Tonearm adjustable for VTA, azimuth and overhang
• Made in Germany

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240-2 with a timeless elegance.

This record player has been equipped with the new TP 19-1 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes

Specs:

• Operation fully automatic
• Drive System internal flat drive belt
• Motor electronically controlled DC motor
• Speeds 33-1/3, 45, 78 rpm
• Speed Select electronically
• Platter 12” / 0.7 kg (aluminium, non-magnetic)
• Tonearm THORENS® TP 19-1
• Pick-up Cartridge THORENS® TAS 267
• Anti-skating (Bias) by spring (adjustable)
• Automatic Shut-off mechanically
• Cable Capacitance 160 pF
• Power Supply external mains adaptor (115-230 V / 50-60 Hz depending on type)
• Dimensions 430 x 130 x 365 mm (W x H x D)
• Weight 6.4 kg
• Finish solid wooden plinth with black piano laquer, black structured enamel,
• Scope of Delivery mains adapter, dust cover (acrylic), RCA interconnects, operating instructions

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

• speed : 33, 45 (manual speed change)

• principle : belt drive

• Speed variance : 33: 0,14% 45: 0,25%

• Wow & flutter : 0,12%

• platter : 300mm MDF with felt mat (0,8kg)

• main bearing : stainless steel

• tonearm : 8,6” aluminium

• effective : arm length 218,5 mm

• overhang : 22,0mm

• effective tonearmmass : 8,0gr

• counterweight for mass : 3 - 5,5g (included)

• tracking force range : 0 - 25mn (OM5 18mn recommended)

• included accessory : power supply, dust cover

• Power consumption : 4,5 watts

• dimensions : 420 x 112 x 330mm (WxHxD)

• weight : 4,0 kg net