Content |
The Echoplex® EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the ʼ70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.
Thatʼs where the EP103 Echoplex Delay comes in. Itʼs the size of a Phase 90, and it delivers the EP-3ʼs legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 40 to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.
|
The new V847 Wah-Wah pedal is an enhanced version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the new Wah-Wah offers guitarists the same legendary tone with the addition of AC power capability and a buffered input jack for preserving the unprocessed guitar tone when the pedal is not engaged. The pedalʼs inductor has undergone a redesign to be closer in specification to the original VOX wah inductors, for improved dynamics and tone. These additions will benefit players of all genres who use a wah pedal as an integral part of their sound.
About the Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V847 Wah-Wah Specificaitons - Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest postion)
- Weight: 1673g (including battery)
- Included Accessories: Vinyl carry bag
| Wah-Wah Pedal HB-01 hell-babe
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
| The BOSS AW-3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects, plus a new "Humanizer" effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar.
- Compact pedal creates a variety of classic "wah" effects
- Dynamic wah sounds provide variable effect based on picking strength
- “Humanizer" effect creates human voice-type vowel sounds
- Dedicated Bass input for processing bass guitar
- EXP Pedal mode allows wah control via optional expression pedal
- Tempo can be set for pedal control or at fixed rate via Manual mode
- BOSS 5-year warranty
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level | -20 dBu |
---|
Input Impedance | 1 M ohms |
---|
Nominal Output Level | -20 dBu |
---|
Output Impedance | 1 k ohms |
---|
Recommended Load Impedance | 10 k ohms or greater |
---|
Residual Noise Level | -92 dBu (IHF-A, Typ.) |
---|
Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
---|
Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
---|
Current Draw | 50 mA (DC 9 V) |
---|
Accessories | Dry Battery 9 V type (6F22/9 V) |
---|
Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) | Size and Weight ( incl. battery ) |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Reviews
There are no reviews yet.