Content |
Specs:
- Pedal Type:Overdrive, Boost
- Inputs:1 x 1/4" (instrument)
- Outputs:1 x 1/4“
- True Bypass:Yes (buffered selectable)
- Power Source:9V DC power supply required (included)
- Power Usage:18.5mA
-
|
|
|
|
|
Application: |
Εl.Guitar |
Type: |
Single |
Effect: |
Overdrive |
|
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
- Classic "blues" guitar tones with tube amp simulation
- Warm distortion and overdrive
- Responds to nuance and volume changes
- AC adaptor or 9V battery operation
- BOSS 5-year warranty
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level | -20 dBu |
---|
Input Impedance | 1 M ohms |
---|
Nominal Output Level | -20 dBu |
---|
Output Impedance | 1 k ohms |
---|
Recommended Load Impedance | 10 k ohms or greater |
---|
Residual Noise Level | -92 dBu (IHF-A, Typ.) |
---|
Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
---|
Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
---|
Current Draw | 50 mA (DC 9 V) |
---|
Accessories | Dry Battery 9 V type (6F22/9 V) |
---|
Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) | Size and Weight ( incl. battery ) |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
Reviews
There are no reviews yet.