DYNACORD P-64-1500 MIPS MODULAR AUDIO MATRIX

The P 64 is a modular, networkcompatible audio matrix including signal processing, system monitoring and remote operability.
4 Audio slots can be equipped with 8 channel audio-inpout or output-cards to meet customized requirements. The P64 includes integrated selfmonitoring and supports spare/redundancy concepts in security-relevant systems. Complete recall of stored parameters and confiurations is possible.
300 MIPS computing power - Expandable to 1900 MIPS
Ethernet Interface - Configuration and control via TCP/IP
CAN interface - Communication with up to 100 external devices (e.g. Dynacord PowerH and/or DSA ampifieres)
RS-232 interface - Connection of media controls and building control systems
CobraNet interface - optianal redundant network module

for up to 24 parameters assignable to function keys. Users can change the "page" by pressing the
HOME key. A single function key can be used for simultaneous multiple parameter control by defining
parameter links. Function keys are defined with DME Designer software.

The ZonePRO 640m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 640m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).

ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.

Per Output:4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters

Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute

6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs

Type:Euroblock (Mic/Line), RCA (Source)

Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered

Impedance (RCA):>25kΩ Unbalanced, RF Filtered

Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA

CMRR:> 40dB, typically >55db @ 1kHz

Mic Pre Gain:30 to 60dB

Mic Input Noise (E.I.N.):

Mic Phantom Power:+15VDC

Number of Outputs: 4 Total

Type:Electronically Balanced, RF Filtered Euroblock

Impedance:120Ω Balanced, 60Ω Unbalanced

Max. Output Level:+20dBu

Type: dbx Type IV™ Conversion System

Dynamic Range line: >113dB, A-weighted, >110dB unweighted

Type IV dynamic range:
>119dB, A-weighted, 22kHz
BW: >117dB, unweighted, 22kHz BW

Sample Rate: 48kHz

Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW

Dynamic Range: >109dB A-weighted, >106dB unweighted, 22kHz BW

THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response: 20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk: >80dB typical

Crosstalk input to
output: >80dB

Propagation Delay 0.6 msec

Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz

Power Consumption: 29 Watts

BTU:

The DBX ZonePRO™ 641M offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The DBX Zone PRO 641M features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 641M device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured.

AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The DBX ZonePRO™ 641M Digital Zone Processor Main Features Include:

• 12 Inputs / 6 Outputs
• 6 Balanced Mic/Line Inputs
• 4 Unbalanced, Mono-Summed RCA Input Pairs
• S/PDIF Input
• Microphone Gain per Channel
• Pre-Configured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth® per Output Zone
• Link Bus
• Comprehensive Signal Metering
• Front Panel LCD
• 9 User-Specified Front Panel Control
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
• Weight: 6.2 lbs / 2.81 kg
• Dimensions: 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)

• 8ch mic/line input and 8ch analog output
• 16ch YDIF digital I/O
• SD Card Slot for playback