| Content |
Features:
DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-12K 12-inch Woofer
94 dB SPL sensitivity, 124 dB max. SPL
250 W continuous, 1000 W peak power
15 mm Plywood Enclosure Cabinet
Full Range
Nominal impedance
8 Ohms
Power Handling - continuous
250 W
Power Handling - program
500 W
Power Handling - peak
1000 W
Max. SPL (calculated with peak power)
124 dB
Axial Sensitivity
94 dB
Frequency Range (-10 dB)
55 Hz to 20 kHz
Coverage (Horizontal x Vertical)
90° x 50°
Connectors
2 x NL4-type
Product Dimensions (H x W x D)
607 x 362 x 340 mm
Net Weight
16.0 kg
Optional Accessories
---
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046
SH-A112, Dust Cover
F01U270395 User's Manual
|
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. | The Electro-Voice® ZX3 offers an unprecedented level of lightweight, 12-inch, two-way, loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, the ZX3 continues the groundbreaking innovation of the EV DVX woofer program, joining the ranks of EV\'s ZX series between the eight-inch ZX1 and the 15-inch ZX5.
When it comes to problem and solution versatility, the ZX3 is in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall and ceiling-mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter allow the ZX3 to be easily and precisely configured in multiple box arrays, mounted on trusses or tripods, deployed as monitors, or used as system mains with a subwoofer.
Housed in a stylish yet rugged injection molded enclosure, the ZX3 shares the same functionality as the larger ZX5, with 90 degre x 50 degree or 60 degree x 60 degree horn dispersion patterns, 45 degree or 55 degree monitor angles, passive or biamp operation, and seven M8 rigging points. The ZX3 is available in a weatherized version and in either a black or white finish. An optional HDC-3 heavy-duty stackable cover is also available. |
Features
* DVX3121 12" LF Transducer with forced air cooling
* ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
* 90° x 50° Coverage Pattern
* 600W Continuous (2400W peak) power handling
* High sensitivity, 131 dB maximum SPL
* Adjustable monitor angle (45° or 55°)
* 2 Anchor plates for single stud fittings and 7integral suspension points
* Available in black or white
* Passive/biamp selectable
* Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz
* Frequency Range (-10dB): 48Hz-20kHz
* Rec. Hipass Frequency: 50Hz
* Axial Sensitivity: 97dB (1W/1m)
* Max. Calculated SPL: 131 dB
* Horizontal Coverage: 90°
* Vertical Coverage: 50°
* Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
* LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
* HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
* LF Transducer: DVX3121, 12" driver
* HF Transducer: ND2, 1" exit Neodymium compressiondriver
* Crossover Frequency: 2kHz
* Nominal Impedance: 8 ohms
* Minimum Impedance: 6.2 ohms
* Connectors: (2) Neutrik Speakon NL4\'s
* Enclosure Material: Polypropylene structural foam
* Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
* Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
* Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
* Net Weight: 43.7 lbs
* Shipping Weight: 48.6 lbs |
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
| Features |
|---|
| 60° x 40° CMD (Constant Matching Design) constant directivity horn | | 1.4" neodymium compression driver with 2.5" diaphragm assembly | | 12" woofer with 3" voice coil | | Dual-function design: built in passive crossover or external bi-amp | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | | LICC (Low Impedance Compensated Crossover) network |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 133 dB | | | Horizontal coverage angle: | 60° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 10 | | | System Sensitivity: | 100 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 500 Watt | | | Peak Power Handling: | 2000 Watt | | | Recommended Amplifier: | 1000 | | | Protections: | Dynamic | | | Crossover frequencies: | 1200 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 2“HF driver, 2.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 100 Watt AES | | | Sensitivity: | 111 dB | | | Woofer: | 12“woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 - Full range or Bi-Amp | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 9 x M10 inserts | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600/23.62 mm/inch | | | Width: | 364 / 14.33 mm/inch | | | Depth: | 385 / 15.16 mm/inch | | | Net Weight: | 23 / 50.7 Kg/Lbs | |
|
Reviews
There are no reviews yet.