DYNACORD LX-3000 Power Amplifier 2×1500 Watts

2,000.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays. For decades, DYNACORD has been one of the leading manufacturers in the pro audio sector and has established a secure […]

 

Read more

The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays. For decades, DYNACORD has been one of the leading manufacturers in the pro audio sector and has established a secure position in the amplifier market thanks to the excellent audio performance,absolute reliability and high stability of the Linear Precision series. With their outstanding operational security, which guarantees years of problem-free use, the amplifiers of the Linear Precision series are now the standard for a wide variety of full-range and multi-way loudspeakers systems in professional venues as diverse as theatres, stadiums, discotheques, clubs and concert halls. Datasheets / ManualsManual (2.2MB)

Load Impedance 2 O, 4 O, 8 O Max. Midband Output Power, THD = 1%, 1kHz 2 O – 2100 W, 4 O – 1500 W, 8 O – 900 W Rated Output Power, THD 300 Slew Rate 38 V/µs Signal to Noise Ratio, A-weighted 108 dB Output Stage Topology Class H Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured) Power Consumption, 1/8 max. output power @ 4 ohms 1070 W Protection Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay Cooling Front-to rear, 3-stage fans Ambient Temperature Limits +5° … +40° ( 40°F … 105°F ) Safety Class I Dimensions ( W x H x D ) mm 483 x 88.1 x 384 Weight 8.70 kg (19.2 lbs) Optional Accessories Rear Rackmount 15.5″ D112 930 (RMS15-CL), Rear Rackmount 18.0″ D112 933 (RMS18-CL), LPN + Lo-Cut Filter D112963 (NRS 90268)

Weight 8.70 kg

Reviews

There are no reviews yet.

Be the first to review “DYNACORD LX-3000 Power Amplifier 2×1500 Watts”

Your email address will not be published. Required fields are marked *

Quick Comparison

DYNACORD LX-3000 Power Amplifier 2x1500 Watts removeMC2 Audio T2000 POWER AMPLIFIER 2 x 1150w 230V removeRCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER removeCrown DSI-4000 2x1200W-4Ω Power Amplifier removeELECTRO VOICE TG5 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 1450 W removeLAB GRUPPEN fP 3400 DIGITAL S.M.P.S 2X1500W remove
NameDYNACORD LX-3000 Power Amplifier 2x1500 Watts removeMC2 Audio T2000 POWER AMPLIFIER 2 x 1150w 230V removeRCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER removeCrown DSI-4000 2x1200W-4Ω Power Amplifier removeELECTRO VOICE TG5 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 1450 W removeLAB GRUPPEN fP 3400 DIGITAL S.M.P.S 2X1500W remove
Image
SKUE009294T2000DPS3000DSI-4000001915FP 3400 DIGI
Rating
Price 2,000.00 incl. GR VAT 1,795.51 incl. GR VAT 1,562.40 incl. GR VAT 1,688.00 incl. GR VAT3,640.00 incl. GR VAT 3,720.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays. For decades, DYNACORD has been one of the leading manufacturers in the pro audio sector and has established a secure position in the amplifier market thanks to the excellent audio performance,absolute reliability and high stability of the Linear Precision series. With their outstanding operational security, which guarantees years of problem-free use, the amplifiers of the Linear Precision series are now the standard for a wide variety of full-range and multi-way loudspeakers systems in professional venues as diverse as theatres, stadiums, discotheques, clubs and concert halls. Datasheets / ManualsManual (2.2MB)

Load Impedance 2 O, 4 O, 8 O Max. Midband Output Power, THD = 1%, 1kHz 2 O - 2100 W, 4 O - 1500 W, 8 O - 900 W Rated Output Power, THD 300 Slew Rate 38 V/µs Signal to Noise Ratio, A-weighted 108 dB Output Stage Topology Class H Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured) Power Consumption, 1/8 max. output power @ 4 ohms 1070 W Protection Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay Cooling Front-to rear, 3-stage fans Ambient Temperature Limits +5° … +40° ( 40°F … 105°F ) Safety Class I Dimensions ( W x H x D ) mm 483 x 88.1 x 384 Weight 8.70 kg (19.2 lbs) Optional Accessories Rear Rackmount 15.5" D112 930 (RMS15-CL), Rear Rackmount 18.0" D112 933 (RMS18-CL), LPN + Lo-Cut Filter D112963 (NRS 90268)

Number of Channels: 2

Output Power: (per channel)

8 ohms 625W
4 ohms 1150W
2 ohms 2100w


Output Power: (bridged)

8 ohms 2300W
4 ohms 4200w


THD%: (@1dB below max output)

@ 1kHz 20Hz to 20kHz
Gain / Sensitivity:

Gain 32/36dB
Sensitivity (for max power) +7.5/3.5dBu (1.8/1.2V)


Frequency Response: 20Hz to 20kHz (+ 0/- 0.5dB)

Power Consumption:

Nominal @ 240v into 4 ohms 2.8A
Nominal @ 120v into 4 ohms 5.6A

Dimensions: (2U) (mm)

Amplifier 88(h) x 482(w) x 460(d)
Single Box (UK shipping) 230 x 580 x 560
Double Box (outside UK) 250 x 610 x 600

Weight:

Amplifier 20.4kg
Boxed (shipping weight) 22.2kg

User's Manual

DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space.

Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg.
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 1700 Watt rms 
Power output stereo 4Ω:2 x 1200 Watt rms 
Power output stereo 8Ω:2 x 800 Watt rms 
Power output bridged 4Ω:3400 Watt rms 
Power output bridged 8Ω:2400 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:108 dB 
Damping factor:> 1000 
Slew rate:55 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 dBm/V RMS 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Temperature-controlled fan 
Protections:Temp., DC, RFI, short-circuit 
Voltage gain:32 – 26 dB 
Amplifier class:HD 
POWER REQUIREMENT
Operating voltage:90 ÷ 245 V (50 / 60 Hz) V ~ Hz  
Power Consumption:SMPS W 
Power factor (cos φ):0.95 from 200 W to full power 
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18,9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:14/30.8 Kg/Lbs

 

Crown DSi 4000 2x1200W-4Ω Power Amplifier

The Crown? DSi 4000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 1,600W with 1% THD, 4 ohm
Stereo (per channel): 1,200W with 0.5% THD, 8 ohm Stereo (per channel):
650W with 0.5% THD, 4 ohm Bridge-Mono: 3,200W with 1% THD, 8 ohm
Bridge-Mono: 2,400W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 3.61V.
Sensitivity at 4 ohm rated output: 3.47V.
Sensitivity at 2 ohm rated output: 2.84V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 8.0A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave, Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB bandpass
gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Delay: Up to 50 msec total delay per channel.
Presets: 20 presets. One is ?DSP OFF.? Fifteen are factory-set for JBL Cinema
systems. Four are user-defi nable.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airflow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)
The amplifier shall be designated the Crown DSi 4000.

Amplifier Gain    41.5 dB, 35 dB, 32 dB (switchable)
CAN Bus Interface    Optional with RCM-26
Continuous Rated Power
(1 kHz, THD 1%) 2Ω    2000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω    1450 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω    850 Watts
Continuous Rated Power
(20-20 kHz, THD

High-Tech in Professional Amplification!
The fP 3400 is a lightweight and space-saving power amplifier, ideal for use in
high quality touring sound systems as well as in demanding permanent installations.
 Heat and cooling are fundamental problems in many extreme high power amplifiers
similar to the fP 3400.
In 1990, Lab.gruppen patented a high efficiency amplifier called fP 3400. This
development was an evolutionary step past the Class D amplifier. Lab.gruppen call
this unique step forward: Class TD. This stands for: Tracking Class  D.
Class TD obtains the same high efficiency as Class D, while avoiding the main
drawbacks. Class D has a power-amplifier topology using Pulse Width Modulation
(PWM) to achieve high efficiency, but it needs a recovery filter between the output
stage and the loudspeaker.
Lab.gruppen?s Class TD amplifiers do not need this filter and this is one reason why
the Lab.gruppen Class TD obtains the same sonic quality as a traditional Class AB
amplifier.

Key Features
2 x 1100 watts @ 8 ?
2 x 1500 watts @ 4 ?
2 x 1700 watts @ 2 ?
(Measured just below clip level, with both channels driven)
Light weight and compact: only 10 kg (22 lbs), 2U high
MLS? Switch: Lab.gruppen?s unique power matching for different loads
Class TD design in flagship models (fP 6400 and fP 3400)

NEW FEATURES:
Replaces the LAB 2002
Multiple positions gain switch
Intercooler? cooling system with front-to-rear airflow and easily
accessible dust filters
Improved low-end power bandwidth
Link connector with XLR-type connector
Extruded front panel for increased stability
Bridged mono outputs in one SpeakOn connector

Besides the traditionally superb Lab.gruppen sonic performance, fP3400 offers a full line
of important features:

Regulated switch mode power supply Today
There are many lightweight, switch-mode amplifiers in the market. However, the unique
Lab.gruppen switch-mode power supply technology offers a number of essential advantages
that make it superior to other and seemingly similar power supply designs. The most
important features are the regulated power supply and the extreme power efficiency. The r
egulated power supply easily deals with a very high variation in the AC mains voltage:it
can drop by up to 20% below its nominal level ? e.g. to 180 V instead of 230 V ? without
any problem. Perhaps even greater benefits result from the extreme efficiency of Lab.gruppen
amplifiers: only a fraction of the energy from the AC mains is turned into heat.
A regulated power supply also presents some other sonic advantages, such as better cone
control and the same fast response as a conventional power supply.

Multiple positions Gain switch
To meet the demands for a flexible gain structure in the system, Lab.gruppen offers a multiple
position gain switch. The maximum amplifier gain can be set to all industry standards: 20, 23,
26, 29, 32, 35, 38 and 41 dB.

Sophisticated protection circuitry, combining:
DC protection; protects against infrasonic signals.
VHF protection; protects the loudspeakers against strong very high frequency non-musical
signals above the audible range.
Thermal protection; prevents the amplifier from being overheated. The protection indicators
on the front panel are switched on, as a warning, before the protection process is initiated.
AC protection; shuts down the power supply if the line voltage is outside the operating voltage.
Clip limiter; prevents severely clipped waveforms from reaching the loudspeakers, whilst
maintaining full peak power.

Weight8.70 kg23.00 kg16.00 kg9.00 kg14.20 kg11.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.70 kg
Weight 23.00 kg
Weight 16.00 kg
Weight 9.00 kg
Weight 14.20 kg
Weight 11.60 kg