Vertical pattern control is a requirement for highest sound quality and speech intelligibility, especially in difficult acoustic spaces. The TS 400 was designed to provide a very even and smooth coverage over a very wide bandwidth by using spaced and filtered woofers as array elements. The 2.5 way design places elements at the ends of […]
Vertical pattern control is a requirement for highest sound quality and speech intelligibility, especially in difficult acoustic spaces. The TS 400 was designed to provide a very even and smooth coverage over a very wide bandwidth by using spaced and filtered woofers as array elements. The 2.5 way design places elements at the ends of the column for maximum distance to lower the effective controlled frequency. The MF-elements and the HF-element are placed in the middle of the cabinet for a smooth transition of the mids to the HF and to extend the coverage control. Each group of elements has its own bandpass filter to optimize the arrayʼs performance to provide good attenuation at 90° off-axis and evenly cover the audience area front to rear with half the rate of attenuation of a non “steered” cluster.
The TS 400 is equipped with 4 x 6,5” DND 6130-16 Neodymium woofers and one Electro-Voice DH3 compression driver coupled with a 90° by 40° constant directivity horn providing very high SPL and excellent coverage. Power handling is 600W RMS / 2.400W peak. Separate protection circuits for the LF-, MF- and HF-elements are used to protect all transducers at the highest power levels. The TS 400 enclosure is aluminum for a very robust but lightweight design with a look that fits any environment.
TA-TS400 tilt adaptor can be used to precisely aim the system for optimum audience coverage.
The optional mounting bracket WMK-25 allows for wall-mount applications with up to 30° of tilt.
The optional carrying bag CB-TS400 is the ideal accessory for easy, protected transportation of the TS 400.
Cabinet Full Range Configuration Passive 2.5-Way Components 4 x 6″ / 1“ Impedance 4 Ohms Rated Power RMS 600 W Peak Power 2400 W SPL 1 W / 1 m 97 dB Max. SPL 1 m / calc. 131 dB Freq. Range (-10 dB) 74 Hz – 20 kHz Coverage (H x V) 90° x 40° Dimensions (W x H x D) mm 199 x 935 x 281 Net. Weight 17 kg
Vertical pattern control is a requirement for highest sound quality and speech intelligibility, especially in difficult acoustic spaces. The TS 400 was designed to provide a very even and smooth coverage over a very wide bandwidth by using spaced and filtered woofers as array elements. The 2.5 way design places elements at the ends of the column for maximum distance to lower the effective controlled frequency. The MF-elements and the HF-element are placed in the middle of the cabinet for a smooth transition of the mids to the HF and to extend the coverage control. Each group of elements has its own bandpass filter to optimize the arrayʼs performance to provide good attenuation at 90° off-axis and evenly cover the audience area front to rear with half the rate of attenuation of a non "steered” cluster.
The TS 400 is equipped with 4 x 6,5” DND 6130-16 Neodymium woofers and one Electro-Voice DH3 compression driver coupled with a 90° by 40° constant directivity horn providing very high SPL and excellent coverage. Power handling is 600W RMS / 2.400W peak. Separate protection circuits for the LF-, MF- and HF-elements are used to protect all transducers at the highest power levels. The TS 400 enclosure is aluminum for a very robust but lightweight design with a look that fits any environment.
TA-TS400 tilt adaptor can be used to precisely aim the system for optimum audience coverage.
The optional mounting bracket WMK-25 allows for wall-mount applications with up to 30° of tilt.
The optional carrying bag CB-TS400 is the ideal accessory for easy, protected transportation of the TS 400.
Cabinet Full Range Configuration Passive 2.5-Way Components 4 x 6" / 1“ Impedance 4 Ohms Rated Power RMS 600 W Peak Power 2400 W SPL 1 W / 1 m 97 dB Max. SPL 1 m / calc. 131 dB Freq. Range (-10 dB) 74 Hz - 20 kHz Coverage (H x V) 90° x 40° Dimensions (W x H x D) mm 199 x 935 x 281 Net. Weight 17 kg
The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.
For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
Frequency Range
:
25 Hz - 160 Hz (-10dB)
Frequency Response
:
34 Hz - 125 Hz (± 3 dB)
Continuous Power Rating
:
2000W
Sensitivity
:
91 dB, 1W / 1m (2.83 Vrms at 3.3 ft)
Nominal Impedances
:
8 ohm
Dimensions (W x H x D)
:
787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in)
Weight
:
50.4 kg (111 lb)
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
Features :
Specifications :
Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
Constant Curvature waveguide for unprecedented array coherence.
Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in)
Frequency Response
:
75 Hz - 20 Hz
(+/-3db)
Maximum Peak Output
:
136 dB SPL at 1m
Coverage Pattern
:
100 x 15 nominal
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance)
:
LF: 750 Watts, HF: 125 Watts
DPC-2 Output Sectoin
:
LF: Dual-Bridged Technology™, Class D
Autio Input Connector
:
XLR with loop through
LF Driver
:
1 x JBL 2262FF 305 mm (12 in) neodymium magnet
HF Driver
:
3 x JBL 2408J, 38 mm (1.5 in)
User Controls
:
Input Attenuator (0-16 dB)
Signal Processings
:
DSP based, resident in Input Module
AC Power Operating Range
:
90-132 VAC or 216-264 VAC, 50/60 Hz
AC Input Connector
:
Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector
:
Neutrik PowerCon (NAC 3MPB)
AC Current Requirements
:
6A per system at 120V, 3A per system at 240V
Enclosure
:
25/15 mm, 11-ply birch plywood
Suspension / Mounting
:
Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
Finish
:
Black DuraFlex™ finish
Grille
:
Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
Net Weight
:
24 kg (52 lb)
Optional Accessories
:
VRX-AF: Suspension array frame
The VT4882 is designed to deliver high quality soundreinforcement of sub-low frequencies for live music and a variety of sound reinforcement applications.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.