Innovative DYNACORD technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS-Net networks The multi-channel DSA 8405 / 8410 / 8805 power amplifiers are a milestone in the design and production of high-powered installation power amplifiers. Unique flexibility through VLD Each channel can be switched individually to provide 500W resp. […]
Innovative DYNACORD technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS-Net networks The multi-channel DSA 8405 / 8410 / 8805 power amplifiers are a milestone in the design and production of high-powered installation power amplifiers. Unique flexibility through VLD Each channel can be switched individually to provide 500W resp. 1000W at either 2Ohms, 4 Ohms or to drive 70 Vrms or 100 Vrms loudspeaker lines directly without an output transformer. In combination with the RCM-810 module the user can configure these amplifiers under IRIS-Net using the Variable Load Drive (VLD) to provide any output power in the range of 100W to 500/1000W per channel (1W increments) at any load in the range of 2 Ohms – 10 Ohms (0,1 Ohms increments). The Phoenix input connectors are electronically balanced. Phoenix connectors are also provided for the power outputs. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven 500 W (VLD : 2 Ω, 4 Ω, 8 Ω, 70V/10 Ω, 100V/20 Ω) Max. Bridged Output Power, THD = 1%, 1 kHz 1000 W (VLD : 4 Ω, 8 Ω, 70V/20 Ω, 100V/40 Ω) Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz 0 dBu (0,775 Vrms) – + 6 dBu (1,55Vrms) Max. Input Level + 22 dBu (9,76 Vrms) Voltage Gain, ref. 1 kHz 32,0 dB – 36,0 dB Frequency Response, ref 1 kHz, 8 Ω Load 15 Hz … 30 kHz (+/- 1dB) Output Stage Topology Class D Dimensions (W x H x D) mm 483 x 88,1 x 421,5 Weight 11,1 kg (24,3 lbs)
Innovative DYNACORD technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS-Net networks The multi-channel DSA 8405 / 8410 / 8805 power amplifiers are a milestone in the design and production of high-powered installation power amplifiers. Unique flexibility through VLD Each channel can be switched individually to provide 500W resp. 1000W at either 2Ohms, 4 Ohms or to drive 70 Vrms or 100 Vrms loudspeaker lines directly without an output transformer. In combination with the RCM-810 module the user can configure these amplifiers under IRIS-Net using the Variable Load Drive (VLD) to provide any output power in the range of 100W to 500/1000W per channel (1W increments) at any load in the range of 2 Ohms - 10 Ohms (0,1 Ohms increments). The Phoenix input connectors are electronically balanced. Phoenix connectors are also provided for the power outputs. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven 500 W (VLD : 2 Ω, 4 Ω, 8 Ω, 70V/10 Ω, 100V/20 Ω) Max. Bridged Output Power, THD = 1%, 1 kHz 1000 W (VLD : 4 Ω, 8 Ω, 70V/20 Ω, 100V/40 Ω) Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz 0 dBu (0,775 Vrms) - + 6 dBu (1,55Vrms) Max. Input Level + 22 dBu (9,76 Vrms) Voltage Gain, ref. 1 kHz 32,0 dB - 36,0 dB Frequency Response, ref 1 kHz, 8 Ω Load 15 Hz ... 30 kHz (+/- 1dB) Output Stage Topology Class D Dimensions (W x H x D) mm 483 x 88,1 x 421,5 Weight 11,1 kg (24,3 lbs)
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
Net Weight, Shipping Weight
19 lb (8.6kg), 22 lb (10.0 kg)
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 1000: 2x500 W/100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 33 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
Crown CDi 2000 2x800W-4Ω Power Amplifier
The Crown? CDi 2000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 1,000W with 1% THD, 4 ohm Dual
(per channel): 800W, 8 ohm Dual (per channel) 475W, 4 ohm Bridge-Mono:
2,000W with 1% THD, 8 ohm Bridge-Mono: 1,600W, 70V Dual (per channel):
800W.
Voltage Gain at 1kHz, 8 ohm rated output: 32.9 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Dual
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A
weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.9A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-defi nable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 2000.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
.%20Typical%20uses%20are%20paging,%20background%20music,%20and%20music-on-hold. The%20160MA%20provides%204%20inputs%20(each%20with%20a%20volume%20control)%20and%20a%2060W%20amplifier%20output.%20Other%20features%20include%20priority%20muting,%20voice%20activated%20muting,%20phantom%20power,%20and%20Bass%20and%20Treble%20controls.%20/p%20%20%20p%20FEATURES%20/p%20%20ulli4%20inputs%20(each%20with%20a%20volume%20control),%20and%20one%2060W%20amplifier%20output%20channel%20/liliIdeal%20for%20paging,%20background%20music,%20and%20music-on-hold/liliBalanced%20Phoenix-type%20mic/line%20input,%20telephone%20output,%20dual%20RCA%20stereo%20music%20inputs,%20screw-terminal%20speaker%20outputs/liliPriority%20muting%20by%20VOX%20or%20external%20switch/liliBass%20and%20Treble%20controls%20on%20master%20output/liliThree-Year,%20No-Fault,%20Fully%20Transferable/liliWarranty%20completely%20protects%20your%20investment%20and%20guarantees%20its%20specifications/li/ul/tdtd%20%20%20%20%20%20table%20cellspacing= "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.