| Content | The LM10-2 is a 2-way loudspeaker system with high power handling capacity that has been designed to be used as stand-alone full range system, together with a passive sub woofer (e. g. LM12-1) or as Mid/Hi component in active multi-way setups. (recommended active crossover frequency: 100 - 150 Hz). Through its half-sided trapezoidal shaped enclosure the LM10-2 is also suitable as monitor speaker system, especially for keyboard applications. The Lo-Mid range between 80 Hz and 7 kHz is reproduced by a Dynacord 10" woofer 357793. Hi range frequencies above 7 kHz are transmitted via an Electro-Voice DH2010A/HPT94 Constant Directivity Horn system. Thermal breakers and halogen protectors prevent that the loudspeaker components are damaged by critical output levels and short-term thermal overload. The cabinet of the LM10-2 is made of 16 mm Mediapan. All connections of enclosure parts as well as the internal bracing are slotted and glued together. The cabinet’s surface is coated with hard-wearing matt black structure lacquer. Front-protection for the loudspeaker systems is gained through an extremely stable, powder-coated metal grille. The terminal board of the LM10-2 provides two Speakon female-type connectors which ensure a secure connection and trouble-free carrying the signal through. A recessed handle on the side guarantees easy and safe transportation. Four heavily dimensioned rubber foot stands, the pole-mount sleevejoint that is recessed in the bottom side as well as the cabinet’s half-sided trapezoidal shape allow a wide variety of different combinations in the loudspeaker setup.
Nominal impedance 8 ohms Rated power capacity RMS 200 W Program power capacity : 400 W SPL 1W/1m 97 dB Max. SPL 1m 123 dB Frequency range ( -10 dB ) 80 Hz - 20kHz Crossover frequency 7 kHz Components Lo 10" Dynacord (357 793) Components Hi Electro-Voice DH 2010A (353 078), HPT 94 Horn (344 511) Connections 2 x Speakon connectors Cabinet style 16 mm mediapan plate, 1 handle, 4 rubber feet Outfit Cabinet surface black varnished, Powder-coated steel grille Dimensions ( WxHxD ) 297 x 457 x 280mm Weight 14kg |
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
Features:
Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction
Weight: 22 |
The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a shielded neodymium magnet. The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8" full range loudspeaker with a shielded neodymium magnet. They are capable of producing up to 20 W RMS, with a maximum of 40 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.
- Model Name / Type: AUCS3.1 / cuban speaker
- Max . Power: 40 W
- RMS Power: 20 W
- Sensitivity (1 W / 1 m): 90 dB
- Max. SPL: 103 dB
- Impedance: 8 ohms
- Frequency Response (±3 dB): 200 Hz - 19 kHz
- Dimensions (W x H x D): 122 x 122 x 106 mm
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 126 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 10" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
118 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
126 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
72 - 18000 HZ
Frequency response (-10 dB)
58 - 20000 Hz
Crossover frequency
1700 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. | Mid-Woofer |
| | Number | 1 | | Basket Ø | 7" (175 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 100 W / 150 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 42 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥106 dB | | Max. peak | ≥114 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 20.3 lb (9,2 kg) | | Magnetically shielded | No | | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 65 - 20000 Hz
Frequency Response (-10 dB) 45 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 45 Hz
Sensitivity 1 W/1 m 100 dB
Max. SPL/1m (calc) 133 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2151
HF Transducer DH3
Crossover Frequency 1750 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.2 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 475 mm (18.7“)
Width 439 mm (17.28“)
Depth 655 mm (25.79“)
Weight Net 23.5 kg (51.81 lbs) |
Reviews
There are no reviews yet.