Content |
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL152 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL152 is ideally suited to be used in most demanding applications. The VL152 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the light-weight DYNACORD DND15400 Neodymium transducer is used. High frequencies are radiated from a rotatable 90°*45° constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL152 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113104 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 500 watts Program Power 1000 watts Peak Power 2000 watts SPL 2,83 V/1m 100 dB max. SPL 1m (calc. with Peak) 133 dB Freq. Range (-10 dB) 50Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 15400 Order-# D366303 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 441x 780x 407 Net Weight 26 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam |
- 1.4" compression driver with 3" voice coil
- 15" woofer, high power, 3.5" voice coil
- 133 dB max spl
- Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
Specifications
Acoustical specifications
Frequency Response (-10dB):
55 Hz ÷ 20000 Hz
Max SPL @ 1m:
133 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
60°
System Sensitivity:
99 dB
Power section
Crossover frequencies:
1400
Transducers
Compression Driver:
1.4'' neo, 3.0'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
110 W AES, 220 W PEAK
Sensitivity (dB, 1W @ 1m):
109 dB, 1W @ 1m
Woofer:
15'' neo, 3.5'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
650 W AES, 1300 W PEAK
Sensitivity (dB, 1W @ 1m):
98 dB, 1W @ 1m
Input/Output section
Input connectors:
Speakon
Output connectors:
Speakon
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
PP Composite
Hardware:
2 x M10
Handles:
1 Top, 2 Side
Pole mount/Cap:
Yes
Grille:
Steel
Color:
Black
Size
Height:
708 mm / 27.87 inches
Width:
437 mm / 17.2 inches
Depth:
389 mm / 15.31 inches
Weight:
20.5 kg / 45.19 lbs
Shipping informations
Package Height:
725 mm / 28.54 inches
Package Width:
550 mm / 21.65 inches
Package Depth:
505 mm / 19.88 inches
Package Weight:
23.7 kg / 52.25 lbs |
The QRx153/75 is a biamped three-way full-range loudspeaker system capable of filling performance spaces with beautifully balanced audio and high acoustic output capability.
The QRx153 is designed to be bi-amplified at 500 Hz utilizing a DX38 digital controller, or a P1202 power amplifier with M153 control module. All QRx models use 13 ply plywood, Futura coating, and steel grilles for wear and weather resistance. The QRx153 is trapezoidal with 15° side angles. "L” track rigging is installed on the enclosure top and bottom. Small arrays can be flown for live work, or the system can be suspended horizontally or vertically for fixed installations.
Thanks to its combination of the DL15ST woofer and large enclosure volume; the horn-loaded 8-inch midrange driver and powerful 3-inch compression driver, the EV QRx153/75 has extended response for high-level, high fidelity applications without the need of a subwoofer. The horn-loaded midrange driver provides excellent pattern control in this critical response area. Both MF and HF horns are aimed downward 10° to provide optimal aiming when the speaker is elevated above the audience. This also helps control sound to provide greater intelligibility.
The QRx153/75 has an excellent combination of performance and flexibility for demanding audiences. |
The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.
The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Electro voice Zx5-60B
The Zx5 is a 15“, 2-way cabinet with a lightweight, high-impact composite enclosure, featuring the newest generation of EV components: the DXV3150, 500W, 15" forced air cooled woofer with 3" voice coil, and the ND2, 2" neodymium compression driver with a 2 mil titanium diaphragm. The Zx5 is rated for 600 watts long-term power handling (2400 W peak) and can produce 132 dB SPL with very smooth 58Hz-15kHz frequency response. With two available coverage patterns (60?°x60?° or 90?°x50?°), two adjustable monitor angles (45?° or 55?°) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. EV Zx5 loudspeakers are available in black and white for indoors and dedicated PI versions for outdoor applications.
|
Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
Reviews
There are no reviews yet.