Content |
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL152 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL152 is ideally suited to be used in most demanding applications. The VL152 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the light-weight DYNACORD DND15400 Neodymium transducer is used. High frequencies are radiated from a rotatable 90°*45° constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL152 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113104 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 500 watts Program Power 1000 watts Peak Power 2000 watts SPL 2,83 V/1m 100 dB max. SPL 1m (calc. with Peak) 133 dB Freq. Range (-10 dB) 50Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 15400 Order-# D366303 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 441x 780x 407 Net Weight 26 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam |
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18 |
Description:
The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.
Applications:
Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs
Features:
Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction
Weight: 67 kg
|
With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D15-3 is also ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies a DYNACORD DND 15400 Neodymium cone transducer is used. The midrange is projected from the ultra-low distortion DYNACORD DND 6120 Neodymium cone transducer with a conical radiation pattern of 120°. The DND 6120 guarantees excellent intelligibility without any necessity of precise aiming. The Electro-Voice DH 3 driver is used for the projection of the high frequencies. The Constant-Direcctivity HF horn has been integrated into the baffl e by CAD methods. The nominal coverage angle of the cabinet is 90°*50°, horizontal*vertical, respectively. Power handling of the cabinet is 500W (continuous), 1000W (program) and 2000W peak. The maximum sound pressure level is 130dB, the frequency range of the D15-3 is 50Hz to 18kHz. The D15-3 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in high-performance small-format active and passive satellite systems. |
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Tri-Amp Switchable
* Optional planar array frame kit PAF-2K for 3-wide array with ASB6128V subwoofer center. (See AE Series Array Guide).
* For fixed installation applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live nightclubs, dance-clubs/discotheques, sports facilities and themed entertainment venues.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
- 1.4" compression driver with 3" voice coil
- 15" woofer, high power, 3.5" voice coil
- 133 dB max spl
- Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
Specifications
Acoustical specifications
Frequency Response (-10dB):
55 Hz ÷ 20000 Hz
Max SPL @ 1m:
133 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
60°
System Sensitivity:
99 dB
Power section
Crossover frequencies:
1400
Transducers
Compression Driver:
1.4'' neo, 3.0'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
110 W AES, 220 W PEAK
Sensitivity (dB, 1W @ 1m):
109 dB, 1W @ 1m
Woofer:
15'' neo, 3.5'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
650 W AES, 1300 W PEAK
Sensitivity (dB, 1W @ 1m):
98 dB, 1W @ 1m
Input/Output section
Input connectors:
Speakon
Output connectors:
Speakon
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
PP Composite
Hardware:
2 x M10
Handles:
1 Top, 2 Side
Pole mount/Cap:
Yes
Grille:
Steel
Color:
Black
Size
Height:
708 mm / 27.87 inches
Width:
437 mm / 17.2 inches
Depth:
389 mm / 15.31 inches
Weight:
20.5 kg / 45.19 lbs
Shipping informations
Package Height:
725 mm / 28.54 inches
Package Width:
550 mm / 21.65 inches
Package Depth:
505 mm / 19.88 inches
Package Weight:
23.7 kg / 52.25 lbs |
Reviews
There are no reviews yet.