Nearfield Monitor with 7″ Woofer – Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification – Bass extension to extend or curtail the low end frequency response – Two different tunings: one for free standing and one designed for speakers within 50 cm of wall – Sound balance to influence the overall response […]
– Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
– Bass extension to extend or curtail the low end frequency response
– Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
– Sound balance to influence the overall response of the speaker
The LYD 7 uses advanced Digital Signal Processing to extend or curtail the low-frequency response by 10 Hz where need while both Position and Sound Balance ensure better performance in any environment.
Compared to its smaller sized sibling, the LYD 7’s larger woofer helps extends bass response.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 45 Hz – 21 kHz
Max SPL (1m, pair): 109dB
Principle: Bass reflex
Crossover Freq.: 4300 Hz
Tweeter: 28 mm Soft dome
Woofer: 7”
Amplifier: HF 50W/LF 50W Class-D
Dimensions (W x H x D): 186 x 320 x 296 mm
Weight: 7,3 kg
I/O Connectors: XLR Balanced: RCA Unbalanced
Type:
Bass Reflex Active
Woofer:
7”
Tweeter:
28 mm Soft dome
Amplifiers Power:
HF 50W/LF 50W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
45 Hz – 21 kHz
Dimensions (W x H x D):
186 x 320 x 296 mm
Weight:
7,3 kg
Weight
7.30 kg
Reviews
There are no reviews yet.
Be the first to review “DYNAUDIO LYD-7 Active Studio Monitor Speaker (Piece)” Cancel reply
Nearfield Monitor with 7" Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
The LYD 7 uses advanced Digital Signal Processing to extend or curtail the low-frequency response by 10 Hz where need while both Position and Sound Balance ensure better performance in any environment.
Compared to its smaller sized sibling, the LYD 7's larger woofer helps extends bass response.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Frequency Response: 45 Hz - 21 kHz
Max SPL (1m, pair): 109dB
Principle: Bass reflex
Crossover Freq.: 4300 Hz
Tweeter: 28 mm Soft dome
Woofer: 7''
Amplifier: HF 50W/LF 50W Class-D
Dimensions (W x H x D): 186 x 320 x 296 mm
Weight: 7,3 kg
I/O Connectors: XLR Balanced: RCA Unbalanced
Type:
Bass Reflex Active
Woofer:
7''
Tweeter:
28 mm Soft dome
Amplifiers Power:
HF 50W/LF 50W Class-D
Input/Output Plugs:
XLR Balanced: RCA Unbalanced
Frequency Response:
45 Hz - 21 kHz
Dimensions (W x H x D):
186 x 320 x 296 mm
Weight:
7,3 kg
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
PRICE PER UNIT
The original A5
The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).
The new A5X
The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.
Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.
A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.
Stereolink
A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.
This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.
Controls and Connectors
The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.
Review: "The A5X: a superb impression.“
"A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)
Mid-Woofer
Number
1
Basket Ø
5.5" (145 mm)
Voice coil Ø
1.5" (32 mm)
Cone material
Carbon/Rohacell/Glass Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
50 W / 75 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 75 W
Control panel
Input Sensitivity
-∞ to +14 dB
High Shelf EQ > 5 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
50 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.6 %
Long term output
≥102 dB
Max. peak
≥110 dB
Crossover frequencies
2500 Hz
Input impedance
30 KOhm
Weight
14.6 lb (6,6 kg)
Magnetically shielded
No
Height x Width x Depth
11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm)
Warranty
5 Years
Delivery contents
Cinch-cable, Power cord, Manual
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
Driver technology
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Mid-Woofer
Number
1
Basket Ø
7" (175 mm)
Voice coil Ø
1.5" (38 mm)
Cone material
Carbon/Rohacell/Glass Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
100 W / 150 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 75 W
Control panel
Input Sensitivity
-∞ to +14 dB
High Shelf EQ > 5 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
42 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥106 dB
Max. peak
≥114 dB
Crossover frequencies
2500 Hz
Input impedance
30 KOhm
Weight
20.3 lb (9,2 kg)
Magnetically shielded
No
Height x Width x Depth
13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.