| Content |
A fully featured but compact and clearly designed 5 channel console to offer the most versatile mixing unit to installers and mobile P.A. Adapted to a very wide range of purposes such as Bars, Disco-bars, Religious Centres, Retail shops, Fitness rooms, Education Centres, Meeting rooms, Mobile P.A. rental etc… where space is limited and users are non-technical people.
- Versatile laptop and rack format design (3u. high / 19” rack).
- 5 channels, 8 LINE Inputs, 3 MIC Inputs, 2 PHONO Inputs.
- 2 independent MASTER (1x XLR / 1x RCA) and REC output.
- 3 band equalizer per channel.
- PFL monitoring. Talkover. Phantom power.
- 45mm ECLER faders per channel.
|
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
| Numark M6 USB 4-Channel USB DJ Mixer
- 4-Channel Club-Style Mixer
- Class Compliant USB Audio Interface
- LED Metering
- 3-Band EQ per Channel
- Microphone Channel with Dedicated EQ
- Replaceable Crossfader w/ Slope Control
- Mac and Windows Compatible
The black M6 USB from Numark is a four-channel DJ mixer well suited for clubs, professionals, and home enthusiasts. The integrated USB audio interface is class compliant and connects to either Mac or PC without the need for drivers. Play music from any optional DJ software and record the mix into any audio recording application.
The M6 features a 3-band EQ per channel, dedicated microphone input with EQ, and a replaceable crossfader with slope control. The master output offers balanced XLR and unbalanced RCA jacks, while booth and recording outputs are available via RCA connections. The M6 USB ships with a USB cable and a standard IEC power cord.
- Four input channels, each with gain, 3-band EQ, and LED metering
- USB computer connection for playing and recording with Mac or PC
- Play music from music-player software
- Record your mix to your computer
- Multiple phono, line, and mic inputs
- Dedicated XLR mic channel and additional mic input on channel 4
- Replaceable crossfader with slope control
- Assign any channel to either side of the crossfader
- Class Compliant: This product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems
| Inputs |
Line: 4 x stereo RCA
Phono: 2 x stereo RCA
Mic 1: XLR
Mic 2: 1/4" / 6.4 mm |
| Outputs |
Main: Stereo XLR / stereo RCA
Booth: Stereo RCA
Record: Stereo RCA
Headphone: 1/4" / 6.4 mm |
| USB Connection |
Type B |
| Line Input |
10 kOhms input impedance
77 mV RMS sensitivity for 1.22 V output |
| Mic Input |
600 ohms input impedance unbalanced
1.1 mV RMS sensitivity for 1.22 V output
60 mV RMS max input |
| Phono Input |
47 kOhms input impedance
1.3 mV RMS sensitivity at 1 kHz for 1.22 V output |
| Line Output |
6.7 V RMS maximum |
| Headphone Output |
0.5 W into 47 ohms |
| Distortion |
< 0.01% |
| Signal to Noise Ratio |
Signal to Noise Ratio (maximum output, JIS-A weighted):
Line: >96 dB
Mic: >94 dB
Phono: >79 dB |
| Frequency Response |
Line: 20 Hz to 20 kHz (± 0.5 dB)
Mic: 20 Hz to 15 kHz (± 0.5 dB)
Phono: ±1 dB (except for controlled attenuation of -3dB at 20 Hz to reduce rumble and feedback) |
| Ducking |
Microphone Talkover: -15 dB |
| Channel EQ |
Bass: +12/-32 dB at 60 Hz
Middle: +12/-32 dB at 1.2 kHz
Treble: +10/-28 dB at 15 kHz |
| Microphone EQ |
Bass: ±12 dB at 100 Hz
Middle: ±10 dB at 1.2 kHz
Treble: ±12 dB at 15 kHz |
| Power Consumption |
Typical: 9.1 W
With Full Headphone Output: 11.6 W |
| Dimensions (WxDxH) |
12.63 x 14.25 x 4.00" / 32.07 x 36.20 x 10.16 cm |
| Weight |
9.6 lb / 4.4 kg |
|
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
| 4 Channel Analogue
DJ Mixer
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.
The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.
With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.
Features
• 4 channels with phono/line inputs
• VCF Filter system – low-pass, high-pass and band-pass filters plus frequency and resonance controls
• 3-band EQ
• External FX loop (Send/Return) system with dry/wet control per channel
• Mic input on balanced XLR, with 2-band EQ
• Balanced main mix out on XLR
• Independent booth out
• Record out
• 3.5mm and 1/4″ headphone outputs
• Touring grade build quality
• Super smooth VCA channel faders
• User changeable crossfader
• Innofader compatible
• Crossfader curve switch
• 20dB pro standard headroom
• 9-segment signal level monitoring |
- 5 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
- Input signal pushbutton selector (MIC/LINE) on back panel
- PFL on all inputs for headphone monitoring
- Independent internal assignable phantom power for all MIC inputs
- Channel 1 features integrated TALKOVER on MIC input. Additional front panel MIC connector (JACK ¼”)
- Direct MIX input allows straight forward connection of further mixers
- Triple tone control (accessible only with screwdriver)
- 2 stereo OUTPUTS (XLR3 / RCA) with independent volume control
- 3 LED OUTPUT level meter
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode pushbutton
- Full remote MUTE control (EUROBLOCK) allows connection with fire detection systems
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
|
Reviews
There are no reviews yet.