| Content |
For those players who need a portable, high performance rig with even more low end than the XLT, Eden have designed a new 2 x 10" cabinet for their latest XST woofers. This new 2 x 10" cabinet handles more power than many 4 x 10" cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp. Truly amazing low end output for a 2 x 10" enclosure. D210XST SPECS: Speakers: EC-1060XS Cast Frame Tweeter: E-2700 Cast Bell Crossover: 3.5kHz @18db Power Handling: 500W RMS Freq. Response: 30hz - 14khz ±2dB Sensitivity: 103dB SPL@1W1M Impedance: 4? or 8? Dimensions: 23“w x 18“h x 18.5“d Weight: 59 LBS |
The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound.
| The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. |
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
| Power: | 200 Watts> | | Speaker: | 1 x 12'' | | Modeling Technology: | No | | Effects: | Yes | | Tuner: | Υes | | Power: | 250 Watts | | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | | Effects: | 6 Effect Types | | Modeling Technology: | - | | Channels: | 1 | | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | | Inputs: | 1 x Rehearsal Input | | Tuner: | Yes | | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | | Footswitch: | Yes ( Optional ) | | FX Loop: | - | | DI Socket: | Yes | | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | | Weight: | 16 kg |
| The Micromark now has a big brother—one who is still small enough to deliver the Markbass sound anywhere, but big enough to provide a fuller sound with plenty of bottom end! The Micromark 801 features a single yellow 8” Markbass custom speaker. The original (6”) Micromark has been astounding people since its first introduction a few years ago. But this new version is even more sonically impressive! |
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. Thatʼs where the SVT-3PRO comes in. Thereʼs a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
Itʼs all about tone. The SVT-3PROʼs Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if thatʼs not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel” for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
| Power: | 450 Watts 4 Ohms, 275 Watts 8 Ohms | | Channels: | 1 | | Equalizer: | Tone Control 3-Band, Mid Tone 5-Position, Graphic EQ 9-Band | | Inputs: | Bass, Power Amp In | | Outputs: | Balanced Line Out, Neutrik Speakon Out, Preamp Out, Tuner Out | | Controls: | Gain, Brightness, Bass, MidRange, Frequency, Treble, Master, Tube Gain, 9 Band EQ | | Dimensions ( W x H x D ): | 48,26 x 10 x 39,37 cm | | Weight: | 11.82 kg |
|
Reviews
There are no reviews yet.