| Content | 3-way powered bookshelf speakers Bluetooth V4.1 with CSR technology Sub-out for an independent subwoofer Calibrated bass reflect port in front of the speaker cabinet F5 pin bi-amplifying XLR type speaker cable with angle connectors 3 Class D amplifier system with Digital Signal Processing and electronic tone control technology
- TOTAL OUTPUT POWER:RMS 14W x 2 (HF) + 14W x 2 (MF) + 40W x 2 (LF) (DRC on);
- SIGNAL TO NOISE RATIO:≥85 dBA;
- FREQUENCY RANGE:45 Hz ~ 20 kHz (± 6 dB) Input
- SENSITIVITY:line input 1: 700 mV ± 50 mV; line input 2: 500 mV ± 50 mV;
- OPT / COAX:350mFFs ± 50mFFs;
- INPUTS:RCA / Optical / Coaxial / Bluetooth;
- WOOFER:6½ inches (178 mm);
- MIDRANGE SPEAKER:4 inches (116 mm);
- TWEETER:¾ inch (19mm) NdFeB;
- DIMENSIONS, MM:217 x 390 x 275 (W x H x D);
|
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years
| Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
| Selling Unit: |
Piece |
| Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
| Featured Technologies: |
- |
| Tweeter: |
2,5 cm aluminum dome with Waveguide |
| Midrange: |
- |
| Woofer: |
13 cm (5\') PMD |
| Power: |
150 W/60 W |
| Resistance: |
6 ohms |
| Frequency Response: |
60 Hz-35 kHz |
| Sensitivity: |
87 dB/2.83 V/1 m |
| Crossover Frequencies: |
3 kHz |
| Auto Standby Operation: |
- |
| Filters: |
- |
| Remote Control : |
- |
| Dimensions (W x H x D): |
200 x 320 x 213 mm |
| Weight: |
5,5kg/piece |
|
# Perfect for use with ultra-shallow TVs 40-inch class and larger
# Only 1.5 inches (38mm) deep
# Wall mount bracket included
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :23-1/4" H x 6" W x 1-1/2" D (59.1cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :23-1/4" H x 6" W x 1-9/16" D (59.1cm x 15.2cm x 40mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 2 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Reviews
There are no reviews yet.