Content | S2000MKIII Powered Bluetooth Bookshelf Speaker Bluetooth V5.0 with Qualcomm aptX HD decoding Continuous Undistorted Power Professional Wireless Remote Control 5 ½’’ Aluminium diaphragm drivers for ultimate bass response Patent-pending planar diaphragm tweeters that adapt to a wide range of acoustic conditions High efficiency Class-D digital power amplification Electronic crossovers and dynamic control based on dual advanced DSP chips Supports digital audio signal with sample rate up to 24BIT/192KHZ Listening presets: Monitor, Dynamic, Classical, and Vocal OLED LCD screen displays source/volume/sound effects modes for more convenient use PVC side panels with matte black finish.
- Power output : L/R (treble): 15W+15W RMS
- L/R (mid-range bass): 50W + 50W RMS
- Signal to noise ratio :90dB(A)
- Noise level:25dB(A)
- Input sensitivity : Line 1 input/800±50mV Line 2 input: 600±50mV
- Bluetooth input: 450±50mFFs
- Optical/Coaxial input: 350±50mFFs
- Frequency response : 45Hz~40KHz
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31KHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28KHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 88 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories (comes with) included wall mount bracket
ALSO AVAILABLE IS WHITE COLOR
|
The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.
The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.
The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.
The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.
Technical features | Metal dome Nautilus™ tweeter |
---|
| Woven glass fibre cone bass / midrange | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) metal dome high-frequency |
| 1x ø100mm (4 in) woven glass fibre cone bass / midrange | Frequency range | -6dB at 72Hz and 50kHz | Frequency response | 80Hz - 23kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response | Horizontal: | over 60º arc | Vertical: | over 10º arc | Sensitivity | 85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m) |
| | |
The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.
The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.
The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.
The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.
Technical features | Metal dome Nautilus™ tweeter |
---|
| Woven glass fibre cone bass / midrange | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) metal dome high-frequency |
| 1x ø100mm (4 in) woven glass fibre cone bass / midrange | Frequency range | -6dB at 72Hz and 50kHz | Frequency response | 80Hz - 23kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response | Horizontal: | over 60º arc | Vertical: | over 10º arc | Sensitivity | 85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m) |
| | |
System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)
|
Reviews
There are no reviews yet.