Content | S880DB
Hi-Res Audio Certified Powered Speakers
- Four EQ Modes
- Hi-Res Audio Certified
- Titanium-laminate dome treble driver
Full Range Bookshelf Speakers
Achieve a full range of audio from the S880DB bookshelf speakers. These bookshelf speakers come with a wireless remote for controlling sound from any point of the room including from the comfort of your own couch or chair.
Compact Hi-Res Audio Certified
Introducing the S880DB the first Hi-Res Audio certified speakers from Edifier. These speakers are compact desktop bookshelf speakers designed to connect to computers, gaming consoles, and all types of devices.
Inputs and Controls
The S880DB has a range of inputs including RCA, AUX, USB, optical, coaxial, and Bluetooth. The USB, optical and coaxial inputs have a sample signal rate of up to 192kHz. Adjust volume, bass, and treble controls with knobs located on the back of the speaker with a built-in amplifier.
Wireless Audio
Stream your music wirelessly to the S880DB using Bluetooth v4.1 technology. Connect your laptop, tablet or phone using Bluetooth and get the party started from your playlist.
XMOS Digital Audio Processor
The XMOS processor used is to add the addition of USB audio as an option. Connect your speakers to your computer via USB. USB memory sticks are not supported.
- POWER OUTPUTR/L(treble): 12W+12W R/L(deep bass) 32W+32W
- FREQUENCY RESPONSE55Hz-40KHz
- SIGNAL TO NOICE RATIO:R/L≥85dB(A)
Frequency Response Delta≤1dB
Noise≤25dB(A)
- INPUT SENSITIVITYPC: 800±500mV
AUX: 600±50mV
USB/Optical/Coaxial: 400±50mFFS
Bluetooth:600±50mFFS
- INPUT TYPEUSB Bluetooth Optical Coaxial PC AUX
|
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31KHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28KHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 88 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories (comes with) included wall mount bracket
ALSO AVAILABLE IS WHITE COLOR
|
# Perfect for use with ultra-shallow TVs 40-inch class and larger
# Only 1.5 inches (38mm) deep
# Wall mount bracket included
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :23-1/4" H x 6" W x 1-1/2" D (59.1cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :23-1/4" H x 6" W x 1-9/16" D (59.1cm x 15.2cm x 40mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 2 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Driver Complements Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Areated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Enhanced Ring Radiator Dynamic Balance tweeter Electrical Overall Frequency Response 36Hz-40kHz Lower -3dB Limit 50Hz dB Upper -3dB Limit 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-200 w/channel Efficiency 88 dB Crossover Orth Crossover Crossover (mid-high array) 2800HZ Inputs Dual Gold-Plated Binding Posts Dimensions Cabinet Size 16 3/4" H x 8" W x 14 9/16" D (42.55cm H x 20.32cm W x 36.99cm D) Mounting Options speaker stands or shelf mount Enclosure Type Sealed Enclosure Type (subwoofer) PowerPort bass venting Shipping/Other Product Weight 29.60 lbs. (13.43kgs) Shipping unit: each Total Shipping Weight 32.50 lbs. (14.74kgs) Speaker Warranty 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity 1 x 6.5” RDT® Bass/mid-range driver 1 x C-CAM® high frequency ribbon transducer Ported. HiVe® II technology All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 42 Hz - 100 KHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 50 - 120 W Bass Alignment: Ported HiVe II Technology Mid / H.F Crossover Frequency: 2800 Hz Bass Low Pass Crossover Frequency: N/A Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 370 x 225 x 285 mm (14 9/16 x 8 7/8 x 11 1/4 inch) Stand External Dimensions - (H x W x D): 615 x 340 x 365 mm (24 3/16 x 13 3/8 x 14 3/8 inch) Weight (each) Excluding stands: 13 Kg (28.6lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.