Content |
- For NAVIS Series Speakers
- Wireless Source-to-Speaker Connection
- Sends Uncompressed Audio
- 5 Hz to 22.1 kHz Frequency Range
Go wireless with the AirX2 NAVIS Transmitter from ELAC. Using 2.4 GHz wireless technology, the AirX2 NAVIS offers you the freedom to connect your source to your NAVIS speakers easily and without running unsightly cables across the room. It transmits uncompressed audio and is equipped with a pair of RCA inputs for easy connection to your audio source. Included in the package is a power adapter and a set of international AC plugs.
Wireless
Transmitter Interfaces
Input Connectors |
1 x 2RCA (Stereo Analog) Female |
Power
Power Connector |
1 x Barrel (7.5 VDC) Input |
General
Dimensions |
3.7 x 3.62 x 1.54" / 94 x 92 x 39 mm |
Weight |
0.44 lb / 0.2 kg |
| Driver Complement: One front-firing x 4.0” midwoofer, Four
x 1.0” aluminum dome tweeters, Two x 4.0” bass radiators
Amplification: 1 x 30W Woofer, 4 x 15W tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, Analog, Ethernet, USB-A for firmware
updates and phone charging | Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
Type |
Powered Bluetooth speaker |
Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
Power Output |
60W peak total |
Input Impedance |
10K ohms unbalanced |
Frequency Response |
65Hz - 22kHz (+/-2dB) |
SNR |
>95db (typical A-weighted) |
THD+N |
|
| Amplification: Class-D Digital Peak: 150 W x 2 @ 4 ohms
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, AUX, RCA, USB-A for firmware updates and
phone charging, Ethernet
Outputs: Left and Right Speaker Binding posts, LFE | Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
|
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Reviews
There are no reviews yet.