ELAC Debut SUB 2030 Powered subwoofer (Black Brushed Vinyl)

Fundamental beginnings.

An ideal subwoofer for smaller systems and rooms, the SUB 2030 plays deep, clean and loud, thanks to a 250 mm woofer and ported enclosure. 350 Watts of BASH amplification deliver tight and authoritative bass.

Speaker type: Powered subwoofer, closed box
Woofer: 1 x 250 mm cone
Frequency response: 20 to 180 Hz
Crossover frequency: 44 to 160 Hz, selectable
Amplifier Type: BASH-Tracking
Maximum amplifier power: 350 Watts Max
Standby power consumption: 1 Watt
Maximum power consumption: 480 Watts (full load)
Inputs: 2 x line-channel (RCA)
Input sensitivity: 2 x 70 mV (RCA)
Input impedance: 10 kΩ (RCA)
Cabinet finish: Matte black or white
Accessories included: AC power cable
Height: 14.0 in / 356 mm
Width: 11.8 in / 300 mm
Depth: 12.4 in / 315 mm
Net weight: 30.1 lb / 14.0 kg

Audiophiles know that recreating the very lowest frequencies is key to accurate music reproduction, and that nothing brings realism to recorded sound like deep, authoritative bass. Yet most affordable systems are compromised in this critical region. Here the rich, powerful bottom octaves are fundamental—literally—to the life of music and movie soundtracks when it comes to reproducing the full spectrum of instruments and sound effects.

ELAC subwoofers are easy to add to your existing speaker system, thanks to built-in power amplification and ELAC’s advanced control app that makes room integration a breeze. Because the low frequencies reproduced by a subwoofer are omnidirectional, it means that a subwoofer can be located most any place in your listening room and that, because of the omnidirectional dispersion pattern of the lowest notes, a single subwoofer is sufficient to reproduce the content of both stereo channels. Listeners who want even more bass output can opt one subwoofer per channel for the absolute ultimate in low-frequency slam, impact and realism.

Add an ELAC powered subwoofer to your sound system and discover what you’ve been missing.

Audio quality and power efficiency have long been at odds when it comes to amplifier design. Traditional Class AB amplifiers, which account for about 90 percent of all amplifiers made, are capable of producing prodigious power and excellent sound, but do so at the expense of efficiency. In fact, up to 50 percent of these amplifiers’ energy is wasted, dissipated as heat. Heat becomes an added liability when such amplifiers, in the case of powered subwoofers, are enclosed in a speaker cabinet. Class D switching amplifiers, on the other hand, run cool and occupy relatively little space. Compact, lightweight and efficient, they are a sensible choice for the latest applications, especially when used for powering subwoofers. Until recently, however, the sound quality achieved by typical Class D designs has not been suitable for the best audio applications, but new technology has improved these designs to compete with the best of traditional amplifier topologies.

Amplifier Output:    500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit    27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit    40 - 120Hz Variable
Variable Low Pass Filter Alignment    Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification:    Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification:    Class-D amplifier
Driver Compliment:    1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D)    340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked)    22.56Kg (49.63lbs)
Mains Input Voltage:    100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance    20Kohms

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)