Content |
The Debut 2.0 Series meets its match.
ELAC’s new SUB3010 is designed as the perfect complement to the all-new Debut 2.0 loudspeakers, adding a powerful bass foundation to music and soundtracks that turns your system into a sensation you can feel as well as hear. Like Debut, the SUB3030 has been engineered and built to deliver huge performance at an affordable price. The compact design allows placement in almost any part of your room, and sophisticated app-controlled EQ and DSP software assure seamless integration into your system.
iOS and Android Apps are available now in their respective stores.
iOS & Android app name is SUB Control 2.0
*1000 Watts Peak Power / 500 Watts RMS Power
**A Bluetooth 4.0 low-energy Android or IOS device is required to set up and operate this subwoofer.
SPECIFICATIONS
Speaker type: Powered subwoofer with passive radiator Woofer: 1 x 12-inch high-excursion doped paper cone Passive radiator: 1 x 12-inch high-excursion doped paper cone Frequency response: 25 to 150 Hz Crossover frequency: 50 to 150 Hz, continuously adjustable Amplifier Type: BASH-Tracking Maximum amplifier powe5r: 1000 Watts peak / 500 Watts RMS Standby power consumption: 0.5 Watt Inputs: L/R/LFE RCA Cabinet finish: Black Ash vinyl Accessories included: AC power cable Height: 19.19 in (No Spikes) Width: 17.63 in Depth: 17.63 in Net weight: 50.16 lb
Audiophiles know that recreating the very lowest frequencies is key to accurate music reproduction, and that nothing brings realism to recorded sound like deep, authoritative bass. Yet most affordable systems are compromised in this critical region. Here the rich, powerful bottom octaves are fundamental—literally—to the life of music and movie soundtracks when it comes to reproducing the full spectrum of instruments and sound effects.
ELAC subwoofers are easy to add to your existing speaker system, thanks to built-in power amplification and ELAC’s advanced control app that makes room integration a breeze. Because the low frequencies reproduced by a subwoofer are omnidirectional, it means that a subwoofer can be located most any place in your listening room and that, because of the omnidirectional dispersion pattern of the lowest notes, a single subwoofer is sufficient to reproduce the content of both stereo channels. Listeners who want even more bass output can opt one subwoofer per channel for the absolute ultimate in low-frequency slam, impact and realism.
Add an ELAC powered subwoofer to your sound system and discover what you’ve been missing.
The challenge for powered subwoofers and their amplifiers
Audio quality and power efficiency have long been at odds when it comes to amplifier design. Traditional Class AB amplifiers, which account for about 90 percent of all amplifiers made, are capable of producing prodigious power and excellent sound, but do so at the expense of efficiency. In fact, up to 50 percent of these amplifiers’ energy is wasted, dissipated as heat. Heat becomes an added liability when such amplifiers, in the case of powered subwoofers, are enclosed in a speaker cabinet. Class D switching amplifiers, on the other hand, run cool and occupy relatively little space. Compact, lightweight and efficient, they are a sensible choice for the latest applications, especially when used for powering subwoofers. Until recently, however, the sound quality achieved by typical Class D designs has not been suitable for the best audio applications, but new technology has improved these designs to compete with the best of traditional amplifier topologies. |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Technical features 500W class 'D' power amplifier
Description Active closed-box subwoofer system
Drive unit 1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output: 500W
Rated power consumption: 94W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input Level (line in)
Input Level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (Binding post)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 325mm 12.8 in)
Width: 325mm (12.8 in)
Depth: 362mm (14.3 in)
Net weight 15.5kg (34.4 lb)
Cabinet Gloss Black
AVAILABLE IN gloss black,wenge,rozenut COLORS
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
|
Reviews
There are no reviews yet.