ELAC Debut C5.2 Center Speaker (Black Brushed Vinyl)

Paint a panoramic sonic landscape. 

To make a life-sized impression, a full-blown surround system needs a center channel just as formidable as the front-channel speakers. The new Debut C5.2 paints a majestic soundstage that makes movies and music come alive. New dual front ports allow placement in cabinets or against the wall without compromising bass frequencies.

Enclosure Type : 2- Way Bass Reflex
Frequency Response: 55Hz – 35000Hz
Nominal Impedance: 8 Ohms
Sensitivity: 87db @2.83v/1m
Crossover Frequency: 2200Hz
Max Power Input: 120 Watts
Tweeter: 1″ Cloth Dome
Woofer: 2 x 5-1/4″ Aramid Fiber
Cabinet: CARB2 Rated MDF
Cabinet Finish: Black Ash Vinyl
Port: 2 x Dual Flared
Binding Posts: 5 – Way Metal
Dimensions (WxHxD) : 21.25″ x 7.09″ x 8.62″

Few speakers have garnered such critical acclaim as the original Debut Series by ELAC. They established a new value proposition, with build quality and performance never before attainable at such an affordable price. Debut "changed the game,” and now it’s changed again with the Debut 2.0 Series—proof that ELAC can’t leave well enough alone. Redesigned from the ground up, they sound even more remarkable than the speakers that sparked the revolution in high-end sound.

A new silk-dome tweeter features a wide-roll surround and takes response up to 35,000 Hz for even more lifelike high frequencies. The waveguide improves directivity control and eliminates the diffraction modes inherent in traditional box enclosures.

The revised shape of the aramid cone offers even greater stiffness and damping, far superior to polypropylene or paper. The added strength allows more flexibility in design to achieve a smoother, extended low-frequency response.

System Format:    3 Way
Frequency Response:    40 Hz - 60 kHz
Sensitivity (1W@1M):    90 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    113.8 dBA
Power Handling (RMS):    200 W
Recommended Amplifier Requirements (RMS):    100 - 200 W
Bass Alignment:    Sealed Cabinet
Crossover Frequency:    L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:    
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)

254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands:    18.9 Kg (41.6lbs)

Frequency Response

60Hz - 35KHz

Sensitivity

86dB

Nominal  Impedance

6 Ohms

Power Handling Single (RMS)

100 Watts

System Power Handling (RMS)

150 Watts

Recommended Amplifier Requirements

40-150 Watts

Maximum SPL (dBA)

106

Bass Alignment

Bass reflex - Rear ported

Driver complement

2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter

Cabinet Dimensions (H x W x D)

125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)

Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)

125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)

Weight

3.6kg (7lb 14oz)

Power handling (watts): 170 (RMS)  
Sensitivity (dB): 90  
Nominal impedance (ohms): 8  
Magnetically shielded
W x H x D (mm): 480 x 178 x 195  
Weight (kg): 9  
Frequency response (Hz): 35 - 45,000  
Connections: Gold-plated 4mm banana socket/binding posts  
Bass port Rear reflex  
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil  
Supplied accessories: Removable grille  
Finish: black ash/ walnut

2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response     90Hz-24kHz
Lower -3dB Limit     125Hz dB
Upper -3dB Limit     20kHz dB
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     91 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Non-resonant curved enclosure with time-alinged driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.50 lbs. (2.04kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)