Content |
Compact powerhouse.
Add the Debut S10.2 powered subwoofer to your main speakers and hear bass you never knew existed. With 200 Watts* built-in, there’s plenty of power to deliver rock-solid low frequencies that make your favorite music and soundtracks more realistic than ever, with the weight and presence of a live performance.
*200 Watts Peak Power / 100 Watts RMS Power
SPECIFICATIONS
Speaker type: Powered bass-reflex subwoofer Woofer: 1 x 10-inch high-excursion doped paper cone Frequency response: 35 to 150 Hz Crossover frequency: 50 to 150 Hz, continuously adjustable Amplifier Type: BASH-Tracking Maximum amplifier power: 200 Watts peak / 100 Watts RMS Standby power consumption: 0.5 Watt Inputs: LFE RCA Cabinet finish: Black Ash vinyl Accessories included: AC power cable Height: 13.5 in / 343 mm Width: 13.5 in / 343 mm Depth: 13.5 in / 343 mm Net weight: 28.7 lb / 13.0 kg
Audiophiles know that recreating the very lowest frequencies is key to accurate music reproduction, and that nothing brings realism to recorded sound like deep, authoritative bass. Yet most affordable systems are compromised in this critical region. Here the rich, powerful bottom octaves are fundamental—literally—to the life of music and movie soundtracks when it comes to reproducing the full spectrum of instruments and sound effects.
ELAC subwoofers are easy to add to your existing speaker system, thanks to built-in power amplification and ELAC’s advanced control app that makes room integration a breeze. Because the low frequencies reproduced by a subwoofer are omnidirectional, it means that a subwoofer can be located most any place in your listening room and that, because of the omnidirectional dispersion pattern of the lowest notes, a single subwoofer is sufficient to reproduce the content of both stereo channels. Listeners who want even more bass output can opt one subwoofer per channel for the absolute ultimate in low-frequency slam, impact and realism.
Add an ELAC powered subwoofer to your sound system and discover what you’ve been missing.
The challenge for powered subwoofers and their amplifiers
Audio quality and power efficiency have long been at odds when it comes to amplifier design. Traditional Class AB amplifiers, which account for about 90 percent of all amplifiers made, are capable of producing prodigious power and excellent sound, but do so at the expense of efficiency. In fact, up to 50 percent of these amplifiers’ energy is wasted, dissipated as heat. Heat becomes an added liability when such amplifiers, in the case of powered subwoofers, are enclosed in a speaker cabinet. Class D switching amplifiers, on the other hand, run cool and occupy relatively little space. Compact, lightweight and efficient, they are a sensible choice for the latest applications, especially when used for powering subwoofers. Until recently, however, the sound quality achieved by typical Class D designs has not been suitable for the best audio applications, but new technology has improved these designs to compete with the best of traditional amplifier topologies. | Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
|
Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 26-3/16” H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 25-1/8” H | 36.5 x 63.8 cm
Depth from Flange | Metric :4” | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years
|
Dimensions | Metric :12” W x 17-7/8” D x 14-7/16” H | 30.5 x 45.4 x 36.7 cm
Driver Complement :One high-definition 10" woofer pressure coupled to one 10" low bass radiator.
Frequency Response :18Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :One to a carton
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Reviews
There are no reviews yet.