ELAC Miracord 50 Belt Drive Turntable (Black High Gloss)

590.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: Miracord 50 Category:
Smooth vinyl precision. ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a […]

 

Read more

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section

  • Drive System: Belt drive
  • Motor: DC motor
  • Selectable Speeds: 33⅓ and 45 rpm
  • Motor Servo: Speed rotation and servo system
  • Rotation Speed Variation: +/-1%
  • Wow and Flutter: 1%
  • Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
  • Platter: Aluminum die-cast
  • Platter Diameter: 0 in / 300 mm

Tonearm Section

  • Type: Aluminum tube, static-balanced
  • Effective Arm Length: 8 in / 223.6 mm
  • Stylus Pressure Range: 0 to 0 g
  • Cartridge Weight Range: 5 to 6.0 g
  • Effective Arm Mass: 4 g
  • Overhang: 6 mm
  • Offset Angle: 25 degrees
  • Anti-Skating: Adjustment Supported
  • Main Bearing: Stainless steel

Cartridge Section:

  • Type: Audio-Technica AT91 moving magnet
  • Stylus Construction: Bonded diamond
  • Mount: Half-inch
  • Frequency Response: 20 Hz to 20 kHz
  • Channel Separation: >18 dB
  • Channel Balance: 5 dB
  • Vertical Tracking: Angle 20 degrees
  • Stylus Pressure: 0 g +/-0.5 g
  • Cartridge Weight: 0 g +/-0.5 g
  • Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier

  • Type :Moving magnet (MM)
  • Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
  • Line Output: 140 mV (-17 dBV)
  • Phono/Line: Switchable
  • Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Smooth vinyl precision. 

ELAC celebrates its 90th anniversary by saluting the Golden Age of stereo when turntables reigned supreme. The legend of ELAC’s Miracord turntable lives on today, with dealers and customers constantly asking when the ELAC loudspeaker family will finally include a turntable. The resurgence of vinyl has created a groundswell of enthusiasm among audiophiles and even casual listeners, and for those with roots in hi-fi, the ELAC Miracord remains an iconic name from the era of the long-playing disc.

Inert MDF chassis

The 12 lb (5.5 kg) MDF chassis rests on specially developed silicone feet that decouple the deck completely from the surface on which it is placed.

Weight 6.00 kg

Reviews

There are no reviews yet.

Be the first to review “ELAC Miracord 50 Belt Drive Turntable (Black High Gloss)”

Your email address will not be published. Required fields are marked *

Quick Comparison

ELAC Miracord 50 Belt Drive Turntable (Black High Gloss) removePro-Ject Debut Carbon DC OM10 Turntable Green removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removePro-Ject Essential II with phono USB Turntable Black remove
NameELAC Miracord 50 Belt Drive Turntable (Black High Gloss) removePro-Ject Debut Carbon DC OM10 Turntable Green removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removeDUAL CS 455-1 Black/Silver EV Phono Pre amp BELT DRIVE Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removePro-Ject Essential II with phono USB Turntable Black remove
Imagecs455-1 silver e phono preamp turntable dual
SKUMiracord 50DCOM10GELEMENTALSBCS 455-1ELEMENTALRBESIIUSBB
Rating
Price590.00 incl. GR VAT449.00 incl. GR VAT 289.89 incl. GR VAT 500.00 incl. GR VAT268.99 incl. GR VAT 384.39 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section

  • Drive System: Belt drive
  • Motor: DC motor
  • Selectable Speeds: 33⅓ and 45 rpm
  • Motor Servo: Speed rotation and servo system
  • Rotation Speed Variation: +/-1%
  • Wow and Flutter: 1%
  • Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
  • Platter: Aluminum die-cast
  • Platter Diameter: 0 in / 300 mm

Tonearm Section

  • Type: Aluminum tube, static-balanced
  • Effective Arm Length: 8 in / 223.6 mm
  • Stylus Pressure Range: 0 to 0 g
  • Cartridge Weight Range: 5 to 6.0 g
  • Effective Arm Mass: 4 g
  • Overhang: 6 mm
  • Offset Angle: 25 degrees
  • Anti-Skating: Adjustment Supported
  • Main Bearing: Stainless steel

Cartridge Section:

  • Type: Audio-Technica AT91 moving magnet
  • Stylus Construction: Bonded diamond
  • Mount: Half-inch
  • Frequency Response: 20 Hz to 20 kHz
  • Channel Separation: >18 dB
  • Channel Balance: 5 dB
  • Vertical Tracking: Angle 20 degrees
  • Stylus Pressure: 0 g +/-0.5 g
  • Cartridge Weight: 0 g +/-0.5 g
  • Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier

  • Type :Moving magnet (MM)
  • Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
  • Line Output: 140 mV (-17 dBV)
  • Phono/Line: Switchable
  • Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Smooth vinyl precision. 

ELAC celebrates its 90th anniversary by saluting the Golden Age of stereo when turntables reigned supreme. The legend of ELAC’s Miracord turntable lives on today, with dealers and customers constantly asking when the ELAC loudspeaker family will finally include a turntable. The resurgence of vinyl has created a groundswell of enthusiasm among audiophiles and even casual listeners, and for those with roots in hi-fi, the ELAC Miracord remains an iconic name from the era of the long-playing disc.

Inert MDF chassis

The 12 lb (5.5 kg) MDF chassis rests on specially developed silicone feet that decouple the deck completely from the surface on which it is placed.

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net
Cardan bearing with zero-mass tracking force setting by a high-precision torsion spring. Removable headshell with 1/2 inch fixing holes. Adjustable tracking force and anti-skating. Headshell made of carbon fiber for special rigid torsion. Chassis technology Solid wooden console. Floating sub-chassis.Vibration -damped aluminum turntables with anti-static felt mat. Drive technology Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back archived discs with a rotational speed of 78 Upm. Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes. Tone arm technology: Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber. Chassis technology: Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat. Drive technology: Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge. Specifications:
  • Speed r/min.: 33/45/78
  • Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
  • Rumble-to-noise ratio: 48 dB
  • Rumble-noise ratio: 72 dB
  • Cartridge system: OMB 10
  • Frequency Response: 20 Hz - 22 kHz
  • Depth sensing capability (300 Hz): 70 µm at 315 Hz
  • Dimensions (WxHxD): 440 x 119 x 360 mm
  • Weight: 5,43 kg
  • Colour: black / silver
  • Power supply: 12V DC, 150 mA
Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

Weight6.00 kg6.50 kg3.50 kg6.00 kg3.50 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.00 kg
Weight 6.50 kg
Weight 3.50 kg
Weight 6.00 kg
Weight 3.50 kg
Weight 5.00 kg