SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE

151.28 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
    Capsule: Hand-crafted, 1″ diaphragm, gold-sputtered     Frequency Response: 20Hz-20kHz     Sensitivity: -32 dBV/Pa (25.1mV/Pa)     Polar Pattern: Cardioid     Impedance: ≤ 200 Ohms     Equivalent Noise Level: 16dB (A-weighted)     Max SPL for 0.5% THD @1kHz: 125dB     Power Requirement: Phantom power 48V±4V     Connector: 3-pin XLR

 

Read more

    Capsule: Hand-crafted, 1″ diaphragm, gold-sputtered
    Frequency Response: 20Hz-20kHz
    Sensitivity: -32 dBV/Pa (25.1mV/Pa)
    Polar Pattern: Cardioid
    Impedance: ≤ 200 Ohms
    Equivalent Noise Level: 16dB (A-weighted)
    Max SPL for 0.5% THD @1kHz: 125dB
    Power Requirement: Phantom power 48V±4V
    Connector: 3-pin XLR

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

SE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE removeAKG C-214 Condenser Microphone removeNEUMANN TLM-103 Condenser studio microphone removeNEUMANN M-149 TUBE Condenser Tube Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG PERCEPTION 120 Condenser microphone remove
NameSE ELECTRONICS X1 LARGE DIAPHRAGM CONDENSER MICROPHONE removeAKG C-214 Condenser Microphone removeNEUMANN TLM-103 Condenser studio microphone removeNEUMANN M-149 TUBE Condenser Tube Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG PERCEPTION 120 Condenser microphone remove
Image
SKUsE X1C 214H11NE00039H11NE00011H11NE00019PERCEPTION 120
Rating
Price151.28 incl. GR VAT 408.00 incl. GR VAT 1,169.00 incl. GR VAT 4,789.00 incl. GR VAT 2,959.00 incl. GR VAT 110.00 incl. GR VAT
Stock

In stock

In stock

In stock

Only 5 left in stock

Available on backorder

In stock

AvailabilityIn stockIn stockIn stockOnly 5 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

    Capsule: Hand-crafted, 1" diaphragm, gold-sputtered
    Frequency Response: 20Hz-20kHz
    Sensitivity: -32 dBV/Pa (25.1mV/Pa)
    Polar Pattern: Cardioid
    Impedance: ≤ 200 Ohms
    Equivalent Noise Level: 16dB (A-weighted)
    Max SPL for 0.5% THD @1kHz: 125dB
    Power Requirement: Phantom power 48V±4V
    Connector: 3-pin XLR

AKG C214 – large 1” diaphragm microphone with cardioid polar pattern, frequency response: 20Hz-20kHz, 20dB pad, requires phantom power (12-52V), XLR connector. Includes clip, case and windshield. Dimensions: 160 x 55mm. Weight: 280g, optional microphone holder SA61 The C214 professional large-diaphragm condenser microphone has been designed as a cost-effective alternative to the high-end C414 family. Like the C414, the C214 offers a supreme one-inch capsule on an integrated suspension to reduce mechanical noise. A switchable 20dB attenuation pad allows recording of loud sources of up to 156dB SPL. A switchable bass-cut filter allows close-up recording with almost no proximity effect. The C214 captures sound by combining one capsule of the legendary C414 dual-capsule system and the patented AKG Back-Plate Technology, resulting in an outstanding performance close to the famous C414 XLII. Sonic character of the C414 XLII for beautifully detailed recording of lead vocals and solo instruments Outstanding dynamic range and ultralow noise for close-up recording of high-output sources of up to 156dB SPL Switchable 20dB attenuator and bass-cut filter for close-up recording and reduction of proximity effect Integrated suspension to reduce mechanical noise and vibration from stage Roadworthy design all-metal die-cast body with shock- and scratch-resistant finish
Large diaphragm cardioid microphone
Pressure gradient transducer with with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7 dB-A
Includes swivel mount
Straightforward handling for homerecording and professional studios

High-quality professional equipment for limited budgets

Acoustical operating principle Pressure gradient transducer
Directional pattern Cardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 23 mV/Pa
Rated impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 17.5 dB
Equivalent noise level, A-weighted1) 7 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 76.5 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 87 dB
Maximum SPL for THD 0.5%2) 138 dB
Maximum output voltage 13 dBu
Dynamic range of the microphone amplifier (A-weighted) 131 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3 mA
Matching connector XLR3F
Weight approx. 450 g
Diameter 60 mm
Length 132 mm

 

Acoustical operating principlePressure gradient transducer
Directional patternOmnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8 plus one intermediate position each
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm34/47/62 mV/Pa*
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-328/25/23 dB*
Equivalent SPL DIN/IEC 65116/13/11 dB-A*
S/N ratio CCIR 468-366/69/71 dB*
S/N ratio DIN/IEC 65178/81/83 dB*
Typical SPL (tube characteristic)K
Maximum output voltage18 dBu
Dynamic range of the microphone amplifier cardioid DIN/IEC 651 for 101 (121) dB
PoweringPower supply N 149
Matching connectorsMicrophone DIN 8F, Power supply XLR 3F
Weight730 g
Diameter70 mm
Length201 mm
* Omnidirectional / cardioid / figure-8
Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-324 dB
Equivalent SPL DIN/IEC 65112 dB-A
S/N ratio CCIR 468-370 dB
S/N ratio DIN/IEC 65182 dB
Maximum SPL114 dB for THD
Maximum output voltage8 dBu
Dyn. range of the mic. amplifier DIN/IEC 651102 dB for THD
Supply voltagePower supply N 149 A
Matching connectorMicrophone: DIN 8F, Power Supply: XLR 3F
Weight460 g
Diameter57 mm
Length142 mm
Live sound
Podcasting Home recording Vocals Musical instruments Perception 120
  • General-purpose cardioid recording microphone
  • Extended frequency response
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Designed and engineered by AKG in Vienna, Austria
The Perception 120 is a 2/3-inch diaphragm true condenser microphone that offers solid build quality, outstanding performance, and excellent value. The low-mass diaphragm delivers a clear sound with accurate sonic detail. A switchable 20 dB preattenuation pad and bass cut filter make the Perception 120 an excellent choice for a wide range of recording and live sound applications. Backed by AKG\'s six decades of experience in making microphones and input from sound engineers around the world, the Perception 120 now brings AKG studio quality to musicians and project studio applications.
Type 2/3\" Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 22 mV/Pa (-33 dBV)
Max. SPL 130/150 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 22 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 72 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance
Recommended load impedance >= 1,000 ohms
Powering
Power requirement 48 V phantom power to DIN/IEC
Connector 3-pin XLR
Finish metallic blue
Dimensions 53 dia. x 165 mm (2.1 dia. x 6.5 in.)
Net weight 525 g (18.5 oz.)
Shipping weight 955 g (33.7 oz.)
Weight0.20 kg0.40 kg3.00 kg0.73 kg0.46 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.40 kg
Weight 3.00 kg
Weight 0.73 kg
Weight 0.46 kg
Weight 0.50 kg